PDA

View Full Version : ss braided water/oil lines



TQMB5
06-05-2008, 08:33 PM
i know some of you guys dont fork over 300+ for pre-fabbed stainless steel oil feed/return and water lines, so my question is where did you buy your parts. looked a little on summitracing but that site always confuses me.

thanks

Poopie
06-05-2008, 08:50 PM
i just use standard fuel rubber lines for the coolant from the auto store. They hold up just fine. you can piece together your lines with an fittings. -10 for the oil return and -4 for the oil feed.

TQMB5
06-05-2008, 09:16 PM
just found these beauties, to bad they come with a hefty price tag to...

http://www.russellperformance.com/mc/proclassic/hose_ends.shtml

TQMB5
06-05-2008, 09:21 PM
also on the chra, the two water holes are threaded what fitting do i put in there? im assuming atp has it but just want to make sure what size, also does it mater which is the feed and which is the return? both look the same.

Euro-Tuner
06-05-2008, 09:24 PM
I bought my stuff from ATP but I WOULD NEVER suggest them, the woman that claims she owns ATP is a complete bitch. I had both my orders messed up and she hung up on mw twice, honestly I wouldnt deal with them b/c the customer service could NOT be any worse. But FWIW its much cheaper to peice together a kit than buy the one from 034. You can price one together for around $200

creechsa4
06-05-2008, 11:07 PM
yeah get all my braided lines through a liquidator store. you can try a hydraulic store that should have all the different style of hoses available. get your an fittings from ebay, much cheaper & still hold fine just like earl's stuff & a fraction of the price.