PDA

View Full Version : 19x8 with ET35 or ET40



Eurotrash8
06-03-2008, 08:07 AM
I have Stasis SS and I want to have the rubber just tucked. That being said my title is my question.....I did do a search but just wanted some updated confirmation on which is the best fit.

TIA AZ's

MOFSTEEL
06-03-2008, 08:15 AM
I have 19x8.5 with a ET32 and 235/35/19 tires

http://i117.photobucket.com/albums/o64/mofsteel/The%20Audi/DSCF2785.jpg

http://i117.photobucket.com/albums/o64/mofsteel/The%20Audi/DSCF2784.jpg

http://i117.photobucket.com/albums/o64/mofsteel/The%20Audi/DSCF2782.jpg

http://i117.photobucket.com/albums/o64/mofsteel/The%20Audi/DSCF2783.jpg

http://i117.photobucket.com/albums/o64/mofsteel/The%20Audi/DSCF2747.jpg

Eurotrash8
06-03-2008, 08:21 AM
That looks Awesome[O_O]

With the look I am aiming for I think I will need to do the 19x8 with ET40 (235/35/19) then to get it in abit.

Thanks for the pics!

joec500
06-03-2008, 08:27 AM
Dropped on STaSIS Street Sport at pre adjusted heights.

19 x 8 ET 35 with 255/19's (not sure about the aspect ratio I will have to look)

http://photos-d.ak.facebook.com/photos-ak-sctm/v215/104/115/844690227/n844690227_2425475_215.jpg

http://photos-e.ak.facebook.com/photos-ak-sctm/v215/104/115/844690227/n844690227_2425476_539.jpg


Stock 18" Ti Wheel with 245/40/18's with 10mm Spacer (stock is et 43) so essentially with the spacer it's an ET 33

http://photos-f.ak.facebook.com/photos-ak-sf2p/v130/104/115/844690227/n844690227_1498637_6774.jpg

http://photos-g.ak.facebook.com/photos-ak-sf2p/v130/104/115/844690227/n844690227_1498638_7289.jpg

Eurotrash8
06-03-2008, 09:48 AM
Thanks for the pics Joe....F#@k your sline looks wicked with the 19's... Your ride height is almost perfect and pretty much want I want except a tad lower.

I think what I'm gonna do is go with the 19x8 with ET40 and do wheel spacers (5 or 10mm) possibly in the back if needed.

joec500
06-03-2008, 10:34 AM
Thanks for the pics Joe....F#@k your sline looks wicked with the 19's... Your ride height is almost perfect and pretty much want I want except a tad lower.

I think what I'm gonna do is go with the 19x8 with ET40 and do wheel spacers (5 or 10mm) possibly in the back if needed.


Thanks for the compliments...I would go lower too, but I was afraid of tire wear issues and I live in the city, so a little clearance is good with our terrible roads, steep hills (San Francisco) and steep driveways, I scrape enough already.

Just an FYI....STaSIS specs their wheels (Champions and Volks) at ET35 which I think is perfect...