PDA

View Full Version : new oil pan



kmoney
05-11-2008, 07:51 PM
i own a 1998 audi a4 2.8Q and i recently bought a new oil pan since i put a hole in my other one, when i got the oil pan it had no gasket so i called in to the local vw dealership and asked if they had any gaskets for my oil pan and they said that audi a4's dont need gaskets and they just use a special silicone sealant but when i took off my old oil pan i saw that it had a gasket and no sealant, ive seen gaskets for my oil pan should i just order one and do i just put that on there or do i put sealant somewhere on the gasket. thanks

tamadrumr88
05-11-2008, 08:16 PM
buy yourself a bentley repair manual, i believe it calls for an rtv gasket... its poured from a tube

when i did the oil pan on my other car i believe i just had to make a circle around all of the oil pain bolt holes, and then obviously around the entire outer edge of the pan

kinda like this:
http://www.4x4wire.com/ford/reviews/arb9in/rtv.jpg

kmoney
05-11-2008, 08:47 PM
so you're saying if i just get the rtv sealant i dont need to buy a new gasket and can just use that?

manufan
05-11-2008, 08:58 PM
use this


http://www.mjmautohaus.com/catalog/product_info.php?info=Victor_Reinz_D176404A2_Gaske t_Sealer_OEM&products_id=2340

kmoney
05-11-2008, 09:36 PM
how long does rtv sealant take to dry before i can put oil in

black00A4
05-12-2008, 05:29 AM
I changed the oil pan on my 2.8 aswell, no gasket just use a gasket maker.

generik777
05-12-2008, 04:11 PM
I changed the oil pan on my 2.8 aswell, no gasket just use a gasket maker.

Same here.