PDA

View Full Version : my car tell me what you think



my 1.8t
05-05-2008, 07:11 PM
http://s219.photobucket.com/albums/cc257/fujiteam03/?action=view&current=IMG_0703.jpg

fred2ka4
05-05-2008, 07:16 PM
Here you go .......


http://i219.photobucket.com/albums/cc257/fujiteam03/IMG_0703.jpg


http://i219.photobucket.com/albums/cc257/fujiteam03/IMG_0708.jpg


http://i219.photobucket.com/albums/cc257/fujiteam03/IMG_0698.jpg


http://i219.photobucket.com/albums/cc257/fujiteam03/IMG_0706.jpg

my 1.8t
05-05-2008, 07:19 PM
hay thanks did not know how to post it that way so thats why i did the link but thanks

Overboostin
05-05-2008, 07:27 PM
looks good

NK2007
05-05-2008, 07:29 PM
Looks clean, but needs cleared corners and debadged trunk imo

my 1.8t
05-05-2008, 07:34 PM
its a work in progress and yes im going to debadeg it what is the easyest way to do that

my 1.8t
05-05-2008, 07:36 PM
and about the clear corners its a one piece headlight

coleA4
05-05-2008, 07:39 PM
Easiest way is a hairdryer, goo gone and a chair. It takes a little while.

my 1.8t
05-05-2008, 07:42 PM
how hot do i get it

the_pirate
05-05-2008, 07:48 PM
how hot do i get it

until you can peel it off....its pretty easy get some fishing line works like a charm!

you can do the clear corner mod for the one piece headlight. i did it on mine. do a search i'm sure you'll find the write up on how to do it.....

looks good. nice and clean!

my 1.8t
05-05-2008, 07:49 PM
thanks for all the info and thanks for the feed back on the car[:D]

my 1.8t
05-05-2008, 07:50 PM
where should i go to find the write up

coleA4
05-05-2008, 07:58 PM
http://audidiy.com/

my 1.8t
05-05-2008, 08:02 PM
hay thanks that site will help me with alot of stuff [:D][up]

Matt@JHM
05-05-2008, 08:02 PM
Looks clean man, I like the rims.

kevin12
05-05-2008, 08:03 PM
Clear Corner Mod
1 http://audizine.com/forum/showthread.php?t=14104

2 http://www.audiworld.com/tech/ext5.shtml

fred2ka4
05-05-2008, 09:50 PM
and about the clear corners its a one piece headlight

I followed the write up from Audiworld and it worked great. It's not that hard to do but you do have to be patient. The results are well worth the effort.

Before:


http://i78.photobucket.com/albums/j91/fred2ka4/IMG_0118_Velvia-1.jpg


After:


http://i78.photobucket.com/albums/j91/fred2ka4/AudiwithnewwheelsII034.jpg

my 1.8t
05-05-2008, 10:01 PM
that does look way better well you guys just gave me something to do on my days off thanks again[:D][:D][up]

Kronic Budz
05-06-2008, 12:53 AM
i say black out the trim on the grill and debadge it like u said and it will look clean. Nice car

Stampy
05-06-2008, 02:01 AM
Propa'

sean1.8t
05-06-2008, 04:02 AM
and about the clear corners its a one piece headlight

ah yes, n00b status!

i was once right where you are. then i found the forums and my modding habbits and car's have never been the same! search around, read the sticky's in the DIY section, and don't be afraid to ask questions!

my 1.8t
05-07-2008, 03:34 PM
thaks for all the feedback and for the options im going to debadge it today

FACT
05-07-2008, 05:24 PM
that ride height is one of the best I've seen

my 1.8t
05-07-2008, 06:47 PM
hay thanks man i have 18x8 and a drop springs thats it for suspention

my 1.8t
05-07-2008, 09:39 PM
ok guys kronic budz is telling me to blackout the trim on the grill. yes i want to do that but my question is do the rings to or leave them crome and i debadged the trunk today and left the rings should i take the rings off to or black them out also and should i use flat black [up][:D]

AudiSport12
05-07-2008, 09:52 PM
Car looks good man!


ok guys kronic budz is telling me to blackout the trim on the grill. yes i want to do that but my question is do the rings to or leave them crome and i debadged the trunk today and left the rings should i take the rings off to or black them out also and should i use flat black [up][:D]

Just do the trim in flat black. Leave the rings alone on both the front and back IMO

http://i41.photobucket.com/albums/e277/kyleconn/DSCF1483.jpg

my 1.8t
05-07-2008, 09:58 PM
is that your ride and if it is that is so sick and what about the trunk rings

AudiSport12
05-07-2008, 10:08 PM
is that your ride and if it is that is so sick and what about the trunk rings

Thanks! As for the trunk rings, I like them being the only badge on the back

http://i41.photobucket.com/albums/e277/kyleconn/rearpic.jpg

my 1.8t
05-07-2008, 10:20 PM
so i take it that is your ride what front mount is that

AudiSport12
05-07-2008, 10:39 PM
Ebay special
just-intercoolers is the ebay seller name
cxracing.com


All you need to know:

http://audizine.com/forum/showthread.php?t=133365&highlight=custom+intercooler

my 1.8t
05-07-2008, 10:50 PM
i found a front mount but dont know what pipe kit to get[wrench]

AudiSport12
05-07-2008, 10:55 PM
Well if you have the intercooler core, just buy the piping that I listed in that thread from just-intercoolers. Email the seller and tell him what you want and he'll make an order for you.
kevin@cxracing.com

my 1.8t
05-07-2008, 11:03 PM
i found a whole kit that will fit my car for like 220$ shiped 27Lx6Hx2.5thick does that sound like one that would be ok i messured it and it looked like it would fit but will i have to cut up my bumper[wrench]

my 1.8t
05-07-2008, 11:20 PM
also do you know where i cn get a euro plate and holder i have one of those big plate holder and it has some big holes in the bumper and if i do a front mount i need to get rid of the big one thats why i want to do a euro plate[:D]

AudiSport12
05-07-2008, 11:20 PM
I got my whole kit shipped for $220. The core you're talking about is the same size as mine. Make sure you get the piping correct because it'll be a pain once you've pulled the bumper off and started cutting and find out your piping is wrong. Just follow that thread I posted and you will be fine. It tells you exactly how to do it.

Oh, and the 2.25">2" steel muffler reducer is seperate from the kit I ordered. All my piping is 2.25".

AudiSport12
05-07-2008, 11:23 PM
Make your own Euro plate:

http://www.autoplates.com/catalog/custom.php?view=europlates

my 1.8t
05-07-2008, 11:24 PM
hay the tread did not work for the plate and front mount can you try to send it to my email at fujiteam03@hotmail.com thanks for all your help

AudiSport12
05-07-2008, 11:28 PM
Weird it didn't work. Works for me.

For the intercooler thread search "custom intercooler" by me (audisport12).
For the Europlate, the web address is autoplates.com

my 1.8t
05-07-2008, 11:36 PM
hay thanks alot and for the plate my bumper is a stock a4 bumper so should i do the plate holder or should i do just the mounting hardware

AudiSport12
05-07-2008, 11:50 PM
I'm guessing the plate holder and the hardware. On my S4 bumper I just double-sided taped it because it already has the recession in the bumper.

my 1.8t
05-07-2008, 11:50 PM
im surching your name and stuff and nothing is comeing up[confused]

JMG
05-07-2008, 11:52 PM
RS4 Grill and ecodes to seal the deal!

AudiSport12
05-07-2008, 11:54 PM
Damn man you're wearin me out lol
Click "search" on the top of this page, then at the bottom of the drop down menu click the "advanced search." Then type away in the designated boxes.

**EDIT/HINT: USE THIS SEARCH METHOD A LOT!! (for most everything)

my 1.8t
05-07-2008, 11:54 PM
oh yeah lets see pics

my 1.8t
05-07-2008, 11:56 PM
cool thanks man im sorry for bothering you so much thanks for all the help[up][:D]

my 1.8t
05-08-2008, 12:08 AM
hay found the write up and thanks again i think you should put the two side vents back on and pull the middle one i think that would look really good but thanks again man

Rhinop21
05-08-2008, 08:55 AM
Which springs do you have on? What size drop?