PDA

View Full Version : Clutch install torque specs-- what are they?!



Kyle H
04-30-2008, 05:47 PM
I'm getting ready to throw my car back together, and I just realized I don't have the torque specs for anything to put it back together!

I only need the real important ones, the flywheel bolts and pressure plate bolts. If anybody knows a site that I can find all of the specs that would be even better though.


Thanks,
Kyle

99blueb5
04-30-2008, 05:59 PM
here: http://a4mods.com/index.php?page=webcontent/pages/clutch.html

and http://www.audiworld.com/tech/

read both they have the torque in there someplace

njm23
04-30-2008, 06:01 PM
Pretty sure flywheel was 44 ft lbs + 90 degrees and the pressure plate was *correction*18ft lbs. Use loc-tite!

djwimbo
04-30-2008, 09:44 PM
Pretty sure flywheel was 44 ft lbs + 90 degrees and the pressure plate was *correction*18ft lbs. Use loc-tite!

44 ft lbs + 90 degrees, 16 ft lbs on an A4 and 18 ft lbs on Passat.

I did 18 ft lbs, ... Both times I had it apart. Yes, red loc-tite is a good idea as well