PDA

View Full Version : **Lamin-x now at Supreme Power!**



Hubert@Supreme
04-22-2008, 02:16 PM
Hello ALL Lamin-x available at Supreme Power!!

Just letting you guys know if you need protective film for your headlights, fogs, and or front end/bumper/hood, we are now an exclusive dealer for Lamin-x films-

http://lamin-x.com/v2_images/show-clear-l2.jpg

SPECIAL INTRODUCTORY PRICING FOR AUDIZINE MEMBERS!
Available colors: clear, gunsmoked, smoked, yellow, blue

A3 Headlight/Foglight kit $39!!
Foglight ONLY $10!!

For protective hood/bumper/etc PLEASE CALL...TOO LOW!![hail]


CALL NOW to place your orders! 714.632.1951 ask for Hubert or Eric-

littlewhite
04-22-2008, 02:20 PM
cant beat that[evilsmile]

Eric x SPP crew [up][up]

krazyboi
04-22-2008, 03:46 PM
I'm down for a set!

Hubert@Supreme
04-22-2008, 04:59 PM
Just give us a call, and we'll take care of ya!

[:)]

krazyboi
04-22-2008, 05:08 PM
Just give us a call, and we'll take care of ya!

[:)]

I did call...left a message w/ receptionist/secretary. Name is Johnny, 703-xxx-xxx number

red whip
04-22-2008, 07:46 PM
Spp Rocks!

:d

Hubert@Supreme
04-23-2008, 01:06 PM
I did call...left a message w/ receptionist/secretary. Name is Johnny, 703-xxx-xxx number

Go ahead and ring up again- Back in office [:)]

SoFresh
04-23-2008, 06:16 PM
Are these precut? Or do we cut them ourselves? Ive heard that the precut ones are always cut short... any upclose pics of the edges around the headlights and fodglights? Can we also mix and match, such as light tint on the headlight and yellow for the fogs?

krazyboi
04-23-2008, 07:55 PM
Are these precut? Or do we cut them ourselves? Ive heard that the precut ones are always cut short... any upclose pics of the edges around the headlights and fodglights? Can we also mix and match, such as light tint on the headlight and yellow for the fogs?

yea, they're precut. and i believe you can mix and match (well, you can on the lamin-x website). i recall Hubert asking which colors i wanted. [up]

i've got mine ordered...will post pix once installed. now to twiddle the thumbs until arrival. thanks for getting my purchase done Hubert. [wrench]

SoFresh
04-23-2008, 10:40 PM
yea, they're precut. and i believe you can mix and match (well, you can on the lamin-x website). i recall Hubert asking which colors i wanted. [up]

i've got mine ordered...will post pix once installed. now to twiddle the thumbs until arrival. thanks for getting my purchase done Hubert. [wrench]

cool, could you take some detailed upclose pics of the fitment with the edges... I want the film to wrap around the corners not be cut short on the face like window tinting is done... if that makes sense

Hubert@Supreme
04-23-2008, 11:54 PM
yea, they're precut. and i believe you can mix and match (well, you can on the lamin-x website). i recall Hubert asking which colors i wanted. [up]

i've got mine ordered...will post pix once installed. now to twiddle the thumbs until arrival. thanks for getting my purchase done Hubert. [wrench]

To confirm color options, YES we offer any color combination for your headlight/foglight.

-Thanks for your order! [:)]


I want the film to wrap around the corners not be cut short on the face like window tinting is done... if that makes sense

I've installed alot of these at work and more...They do NOT wrap around the edges. They are flush..If you want them to be wrapped around, we can get you custom cut pieces. Please call with that type of referrals-

Here are some side shots of an E46 M I did, not too long ago-

http://i287.photobucket.com/albums/ll152/supremepowerdotcom/laminx.jpg

SoFresh
04-24-2008, 01:23 AM
Could you post pics of the difference between smoked and gunsmoked? I know ones lighter, but how much lighter? Does this affect the light output very much? i.e. with smoked is the light output worse? i.e. with the yellow say installed on the full headlight... will the entire light beam be a neon yellowish or will the HID beam break through the yellow and be someone white-ish like normal? Probably just answered my own questions, but I would like to know from your experience what you have noted. Thank you... sorry for 100 questions.

krazyboi
04-24-2008, 05:59 AM
He told me that smoke is DARKER then gunsmoke and that it should typically be used for tail lights. Said output of smoke on the fronts isn't so great. Needless to say, I went w/ gunsmoke for both headlights and fogs.

Hubert@Supreme
04-24-2008, 11:13 AM
Yes Smoked is significantly darker than GunSmoked as krazy said above. I've ran/tried Smoked on my headlight/indicators and it almost blacked-out everything. If you are looking for the "blacked-out" look, then I recommend that. If not, the GunSmoked finish is the way to go. The output does diminish on standed type bulbs, moreso than HID style lighting-

[up]

krazyboi
04-24-2008, 08:28 PM
damn, i should work for supreme! i can answer all the questions!! j/k lol!

Ipsodox
04-25-2008, 12:55 PM
Do you have precuts for the s-line side markers? I saw someone post pics of their ride with blacked out sidemarkers and he said they were lamin-x, but I don't see them on your site.

Hubert@Supreme
04-26-2008, 08:40 AM
They don't make sidemarker kits, but if you want just give me measurements, and we can get them custom cut.

PHONE IN during the week, to get that quote. 714.632.1951

Hubert@Supreme
04-29-2008, 06:10 PM
[up] up-

duglas
05-05-2008, 09:28 PM
I am interested in front bumper, half of the hood(or some of the hood) and rear bumper
08 A3 Sline, clear.. PM me a price

Hubert@Supreme
05-19-2008, 10:52 AM
pm sent!

[up]

Hubert@Supreme
05-29-2008, 06:17 PM
http://www.supremepowerparts.com/prod_images/large/A007.jpg

NOW ONLINE-

>>A3 Lamin-x at Supreme!<< (http://www.supremepowerparts.com/products/bulbs.aspx/51/6003/_LAMIN_X_HEADLIGHT_FOGLIGHT_KIT_AUDI_A3_2.0T_3.2)

saulz
06-03-2008, 12:06 AM
I'm not a hands on guy myself...so plz don't flame me!! :o
What are the tools needed and what is the best way to get it installed?
cuz I don't have a clue on how i'm gonna install these when I get them

Thanks,

krazyboi
06-03-2008, 06:38 AM
I'm not a hands on guy myself...so plz don't flame me!! :o
What are the tools needed and what is the best way to get it installed?
cuz I don't have a clue on how i'm gonna install these when I get them

Thanks,

It comes with everything needed. All you need to do is clean the lens of your headlight and/or foglights. There's instructions how to do it, and a plastic scraper to flatten it and remove the bubbles. It's not all too difficult, just trying to line it up properly will be your issue.

Hubert@Supreme
06-03-2008, 10:04 AM
Like krazyboi said above (thanks!), the Lamin-x kits come with a squeegee, and installation instructions. I suggest doing the install during the day, with no rain in your local forecasts. And you can always give us a call, so we can help you through it, if Lamin-x instructions aren't enough. No prob! [:)]

littlewhite
06-05-2008, 09:28 PM
They are good stuff, i got it almost like 1.5 yrs ago and works great! I might need to order the foglight one since the edges of mine is pealing off a bit and dirty. And is only $10 !

drew138
06-08-2008, 08:03 PM
Does the laminx come off with no residual if you wanted to take it off?

Hubert@Supreme
06-09-2008, 10:15 AM
Perfect timing, since I just recently took off some clear lamin-x off my foglights, to install yellow ones. It peeled off rather easily. You want to heat up the lamin-x by having your headlights/foglights on (additionally, I put a white towel to reflect back to the lens). And peeled off with no residue. Sometimes, if left on for over 5 years, you may need to get some goof off, which can be purchased at Ace Hardware, Home Depot...then it just rubs off with your fingers.

[up]

drew138
06-09-2008, 05:45 PM
I happen to have a new set of Xenon housing for my A3 that I would like to cover with the "tint" shade. Since I've got the housing in my garage. my preference would be to just buy a sheet that I can use to custom cover the housings. Can you recommend a particular size that would cover a left and right housing on an A3. I've heard mixed results on the pre-cut fittments so I prefer to get the fit myself?

Also, what is the color of the darkest shade? I want to do my sidemarkers? What would be a good sheet / size to use for these -- I guess they are about 5x2.5" or so?

I'm ready to order! :-)

Hubert@Supreme
06-10-2008, 12:56 PM
Hi-

Just measure the circumference of the headlights. Give yourself at least 1/4 to 1/2" extra. Then we can get pre-cut squares for you to custom fit.

[up]

drew138
06-10-2008, 04:37 PM
OK, will do. Prob have it done this weekend and will post up measurements here in case anyone else wants to do this as well. Thanks

1ofnon3
06-10-2008, 10:03 PM
can you get mkv golf headlight tint?

Hubert@Supreme
07-01-2008, 05:38 PM
yes we can!

fusionx
07-01-2008, 07:13 PM
On the side markers(s-line car), im looking to get those blacked out and I thought id give lamin-x a try. Do you think it would be a good call?

speedydragon
07-02-2008, 12:58 AM
are these available for the B5 a4?

Hubert@Supreme
07-02-2008, 11:33 AM
On the side markers(s-line car), im looking to get those blacked out and I thought id give lamin-x a try. Do you think it would be a good call?

I've had a few customers do this, to their likings although I haven't seen this in person yet. Its very easy to put on, or take off especially on the sidemarkers.



are these available for the B5 a4?

yes they are available for the B5 Audi.
(here's the link for the B5 kits= http://www.audizine.com/forum/showthread.php?t=205712)

[up]

Tyray
07-03-2008, 07:11 PM
is there a specific % tint? i want a set but dont want it to be too dark and block out my HID too much.
anyone have picture?

eliTTe
07-03-2008, 07:30 PM
[down][down] two BIG thumbs down for SPP's customer service backing up what they sell... if they send you a broken product, its the customers fault not theirs!

Hubert@Supreme
07-07-2008, 10:59 AM
Tyray- The tints are as follows smoked, gunsmoked, tint. I recommend tint for your application, as it will be the lightest of the shades.

==========================

eliTTe- We DO back up everything we sell. What is your full name, so i can look into your order that you say was received broken. So many factors can be here-say and the internet is limitless.

Remember to call and ask for me directly or Eric, so we can resolve your issue. If it was damaged due to shipping or other, then we can get that insured and replaced (given time-frame).

Jetta
07-14-2008, 12:34 PM
how does the blue look on a car? I looked at the pictures but they are all up close and I cant tell if it looks blue or just gives it that blue ting like some hids have.

krazyboi
07-14-2008, 12:56 PM
Gunsmoke installed after resizing template!

http://i76.photobucket.com/albums/j12/krazyboi98/lamin-x/8d9f4ac2.jpg

Hubert@Supreme
07-23-2008, 02:22 PM
bump!

SoFresh
07-23-2008, 04:45 PM
How fast do you guys process the orders and would I be expecting them to arrive in WA state?

Hubert@Supreme
07-23-2008, 04:53 PM
Processed within a day or 2. Shipping to WA is another 3-5days. ETA 1 week!

[up]

Brungold
07-24-2008, 12:47 PM
just called and got the machine. lemme know when you're back, thanks!

SoFresh
07-24-2008, 01:40 PM
Just got off the phone with you guys and was told to order on the website since you guys were busy, I tried to order on the website however the shipping part of the check out wasnt working and kept saying try again later....

I would like to get these ordered so I can have them shipped, need them asap. Thanks

Hubert@Supreme
09-16-2008, 04:56 PM
TTT the deals are going on again!