PDA

View Full Version : where can i get intercooler piping?



maksim.7
03-18-2008, 02:34 PM
i need new intercooler piping for my a4 1.8t. the pipes that i have right now are exhaust piping, and theyre all bent up. my car has a horrible ide b/c of this, and im loosing alot of power. does anyone have piping for sale?[wrench]

dingguhlbary
03-18-2008, 02:55 PM
ebay man. seriously. check out cxracing maybe

maksim.7
03-18-2008, 02:58 PM
ebay man. seriously. check out cxracing maybe

hahahaha thats exactly what i was looking at just 5 seconds ago. yeah are they good pipes?

dingguhlbary
03-18-2008, 03:33 PM
yeah, there are a lot of people here that use them. i know most of them will say its pretty good piping for the price. try pming someone on this thread (http://www.audizine.com/forum/showthread.php?t=190388) and see what they say.

maksim.7
03-18-2008, 03:35 PM
yeah, there are a lot of people here that use them. i know most of them will say its pretty good piping for the price. try pming someone on this thread (http://www.audizine.com/forum/showthread.php?t=190388) and see what they say.

k thanks alot man![;)]

dingguhlbary
03-18-2008, 04:38 PM
yeah no problem. good luck

audisnapr
03-18-2008, 06:05 PM
the crx stuff is good if you are need of small <2" ID piping. Ebay if full of places that sell piping, find the stuff that has the correct ID... min. 2.25"

MikeWasHere05
03-18-2008, 06:34 PM
the crx stuff is good if you are need of of small <2" ID piping. Ebay if full of places that sell piping, find the stuff that has the correct ID... min. 2.25"

[confused]

Not on anything less than/equal to a K04. I'm running 2" piping on my PC-16, the max I would recommend is 2.25"

EDIT: I'm using CXRacing's piping as well. I used two 75 degrees and two 90 degree bends.
http://img.photobucket.com/albums/v71/mikeperson/pc16/pc16006.jpg
http://img.photobucket.com/albums/v71/mikeperson/pc16/pc16005.jpg
http://img.photobucket.com/albums/v71/mikeperson/pc16/pc16004.jpg
http://img.photobucket.com/albums/v71/mikeperson/pc16/pc16003.jpg
http://img.photobucket.com/albums/v71/mikeperson/pc16/pc16002.jpg

audisnapr
03-18-2008, 06:42 PM
2.25" ID on the hot side
2.25" to 2.5" ID on the cold side.

I've mentioned on several threads before, many of the ebay "kits" claim 2.25" piping, but not all of it is. many are 2.125" OD with 1.975-2.0" ID. Verify before you buy. Make sure the guy knows how to use a caliper to measure

maksim.7
03-18-2008, 07:01 PM
2.25" ID on the hot side
2.25" to 2.5" ID on the cold side.

I've mentioned on several threads before, many of the ebay "kits" claim 2.25" piping, but not all of it is. many are 2.125" OD with 1.975-2.0" ID. Verify before you buy. Make sure the guy knows how to use a caliper to measure

k thanks man[up] that helps alot! [;)]

audisnapr
03-18-2008, 07:05 PM
out of curiosity, which turbo setup are you running? 2.25" ID on both sides would be plenty for a KO3/04 setup and would allow for future turbo upgrades.

maksim.7
03-19-2008, 12:50 PM
out of curiosity, which turbo setup are you running? 2.25" ID on both sides would be plenty for a KO3/04 setup and would allow for future turbo upgrades.

yeah i got the car off an auction, so i have no idea what kind of turbo setup it is. all i know is that the turbo is stock, everything else is upgraded.[:|]