PDA

View Full Version : Those of you with k04 andtt225 maf. How do you get the maf into the turbo inlet hose?



a4_1.8t_01
03-04-2008, 04:39 PM
Do you modify something? It seemslike it will never fit in there. Its much thicker.

salz2135
03-04-2008, 06:15 PM
what tuning are you running that requires a tt225 maf?

Nebone
03-04-2008, 06:21 PM
Looks like Hammer file.

audiFUEGO
03-04-2008, 06:29 PM
it wont fit.

I used a 1" long piece of 2.75" steel tubing. I inserted the tubing into the mouth of the TIP and then used a separate coupler over BOTH the MAF and the TIP. The tubing is there to provide opposing force when you clamp it down.

a4_1.8t_01
03-04-2008, 06:31 PM
Ok thanks thats what I was looking for.

NUISANCE
03-04-2008, 11:29 PM
Yes it will fit with some love and some lube.

E-money81
03-21-2008, 11:26 PM
it wont fit.

I used a 1" long piece of 2.75" steel tubing. I inserted the tubing into the mouth of the TIP and then used a separate coupler over BOTH the MAF and the TIP. The tubing is there to provide opposing force when you clamp it down.

Wow, a thread that discusses a frustrating problem that I'm currently going through. Do you have any pics of the solution u discovered?

audiFUEGO
03-22-2008, 12:41 PM
Wow, a thread that discusses a frustrating problem that I'm currently going through. Do you have any pics of the solution u discovered?

PM'd you back
this is the best pic i have

http://i232.photobucket.com/albums/ee37/audiFUEGO/IMG_0959.jpg

see how the coupler stretches over the TIP. Then the steel tubing insie the TIP provides opposing force for the clamp.