PDA

View Full Version : DIY: B6/B7 A4/S4 - CityLight with Fog Mod



Eddie Man
03-11-2007, 12:58 PM
First of all, HUGE props to "FatAuto" for figuring this out. For reference >>> FatAuto's AW Link (http://forums.audiworld.com/s4b6/msgs/333541.phtml)

Here's how I did it and I've just include lotso pics for people who like pics [:)]

1. Identify wires (Position #1 & #2) on the light switch harness
http://www.audizine.com/gallery/data/500/4066DSC05045.JPG

2. Cut Wire #2. Allow for ample wire for step #3 & #4 below.
http://www.audizine.com/gallery/data/500/4066DSC05046.JPG

3. Strip Wire #2.
http://www.audizine.com/gallery/data/500/4066DSC05047.JPG

4. Crimp on Male Wire Tab Connector to #2 Wire.
http://www.audizine.com/gallery/data/500/4066DSC05048.JPG

5. Use these style wire tap for a fool-proof tap. The best wire taps money can buy, IMHO.
http://www.audizine.com/gallery/data/500/4066DSC05049.JPG

6. Crimp on Wire Tap onto Wire #1. Crimp far enough downstream to allow for the ease of Step #7 below.
FYI, I barely left enough room for mine, but for you guys, go further downstream (See Step #7).
http://www.audizine.com/gallery/data/500/4066DSC05050.JPG

7. Connect up Male Wire Tab to Wire Tap & Tape raw end of Wire #2.
http://www.audizine.com/gallery/data/500/4066DSC05051.JPG

8. Done, in 5 minutes time. Fogs w/CityLights Mod...
Whooot !!!!
http://www.audizine.com/gallery/data/500/4066DSC05053.JPG


Original Thread w/ Discussion: http://www.audizine.com/forum/showthread.php?t=124446