PDA

View Full Version : door blade install



turbo kraut
02-04-2008, 02:30 PM
i removed the old blade and can't get that metal piece that is on the front screw type thing sticking off the door for the blade


how do you remove it?


thanks in advance for your help

Mawhitey
02-04-2008, 05:29 PM
the brass bit?

Use pliers to hold the brass bit and a screwdriver to turn it, you wont need it as it supposed to be part of the blade

turbo kraut
02-04-2008, 09:56 PM
i'll try that

Rinna-chan
02-06-2008, 12:26 PM
I had to carefully drill mine out (with helper holding the outer side with some vice grips). Stainless hex key screws are a trouble free replacement for the crappy stock screws.

turbo kraut
02-07-2008, 05:55 AM
i just took a small hand saw and sawed off the bit, then slid the new one on........it isn't going any where