PDA

View Full Version : Those with an ATP manifold what waste gate are you using?



chnaman
01-16-2008, 09:35 PM
what waste gate are you using with your atp manifold? Since its mounted on the underside of the manifold i'm having troble with the few ive tried hitting the engine mount.

p4v

http://www.atpturbo.com/Merchant2/graphics/00000001/Catalog%20Images/vwaudi/vvw001-01.jpg

Poopie
01-16-2008, 10:42 PM
you'll need a wastegate relocation kit...atp has one or you can have one custom made.

k0mpresd
01-17-2008, 08:10 AM
yes..either transverse or longitudinal relocation kit will work

i used transverse pipe w/ turbonetics gate...had to grind small amount off the back of the gate but it did fit

pac1085
01-17-2008, 08:25 AM
you'll need a wastegate relocation kit...atp has one or you can have one custom made.

Don't buy theirs. I'm not sure if they sell it anymore. I bought one back in November, it was made wrong. They confirmed that the whole batch was made wrong and refunded my money. I'm not sure if they are having new ones made, I doubt it. You will need to get one custom made.

Poopie
01-17-2008, 10:26 AM
Good to know!

chnaman
01-17-2008, 06:16 PM
thanks for the info guys