PDA

View Full Version : estimated power ?!



stilldubbin203
01-16-2008, 06:15 PM
ok so i'm installing my turbo tomorrow and wanna get an idea of what im gonna be making for power (whp). I'm gonna be running a ko4 with giac pc-16 software, genesis 380cc injectors, 5 bar fpr, fmic, and a borla catback with a 2.5" psi test pipe...also anyone who wants to recommend getting anythin else feel free..

A4Rollin
01-16-2008, 06:17 PM
DV for sure!

AudiRacerS4
01-16-2008, 06:18 PM
umm you have alot of wrong parts in there...PC-16 runs a 3BAR FPR and 310cc injectors

Solaris
01-16-2008, 06:18 PM
PC16 is supposed to run 310cc injectors @ 3 bar. You're going to be running WAY too much fuel

AudiRacerS4
01-16-2008, 06:19 PM
PC16 is supposed to run 310cc injectors @ 3 bar. You're going to be running WAY too much fuel

haha beat you to it [:p]

AudiRacerS4
01-16-2008, 06:19 PM
even with the 310cc and 3BAR it still runs rich i'd get an adj fpr

stilldubbin203
01-16-2008, 06:20 PM
well i have an adjustable 3-5 if i bring it down to 3 do u think it will make a big difference

Solaris
01-16-2008, 06:21 PM
haha beat you to it [:p]

Yeah, by seconds.

AudiRacerS4
01-16-2008, 06:22 PM
well i have an adjustable 3-5 if i bring it down to 3 do u think it will make a big difference

id get one that goes lower than 3bar and you also need 310cc injectors not the 380's

Solaris
01-16-2008, 06:22 PM
well i have an adjustable 3-5 if i bring it down to 3 do u think it will make a big difference

380cc injectors are still too big. You'd have to run 2bar to match the flow of 310s

Solaris
01-16-2008, 06:23 PM
id get one that goes lower than 3bar and you also need 310cc injectors not the 380's

LOL, I'll just let you answer. Though, I don't know if under 3 bar is necessary. PC16 tends to go toward the lean side in the upper RPM

stilldubbin203
01-16-2008, 06:33 PM
ok well looks like these r goin in the classifieds rite now

onemoremile
01-17-2008, 09:50 AM
If you get it running correctly you will make 240hp with peak torque closer to 300. You'll always get more torque than horsepower with a K04-15 since it approaches it's flow limits around 5000 rpm.