PDA

View Full Version : Fuel Mods. Walboro and Aeromotive. are they ok?



isleepsober
01-10-2008, 08:19 AM
I am parting out my 91 eclipse and have parts i never used on it. I just bought a 98 a4 1.8 with the pes t28 kit and many more mods. Can i use my Walboro 255lph on it and will it benefit alot? how about the aeromotive universal FPR. will these mods benefit my ride or should i just sell them. both are new and never used.

Solaris
01-10-2008, 09:00 AM
Is the Walbro the "high pressure" version? If not, it's not to be used in forced induction applications.

pac1085
01-10-2008, 09:14 AM
Depends on the part number of the Walbro and like Solaris said, whether or not its the low pressure or high pressure version.

As far as the FPR is concerned - yes, you can use it, but you would need to replace your fuel rail with aftermarket & make custom lines, you don't need to use that regulator on an off the shelf kit like the PES T28.

isleepsober
01-10-2008, 09:16 AM
thanks. ill check the part number.

k0mpresd
01-10-2008, 09:29 AM
gss240 walbro is what is used in b5 applications

if that is the pump you have then you may use it

340..thanks for the correction :)

Solaris
01-10-2008, 09:31 AM
I'm using the GSS340

k0mpresd
01-10-2008, 09:36 AM
thats prob it.. its been a long time since ive looked at the one i have ;)

i have pic on my photobucket but that would take forever to load on edge/iphone just to check for a part # haha

k0mpresd
01-10-2008, 07:27 PM
http://i22.photobucket.com/albums/b301/k0mpresd/walbro_install005.jpg

also..you must take up space between original pump housing and walbro pump

http://i22.photobucket.com/albums/b301/k0mpresd/walbro_install010.jpg

Solaris
01-10-2008, 07:37 PM
I used a piece of tubing I got from McMaster-Carr for the spacer