View Full Version : Part 2 - Ti Grill
RS.Fez
10-02-2007, 12:01 PM
So after 2 hours of trying to figure out how the damn bumper came off, i finally slapped this puppy in! I think its the hawtness....but i forgot to take the S4 badge in the front, i hope i dont have to remove everything again to just change the damn thing.
http://photos-163.ll.facebook.com/photos-ll-sf2p/v143/50/23/501161163/n501161163_280193_8977.jpg
sorry for the crappy quality pic.....just taken on my camera phone.
Hopefully this week my springs and exhaust come in so she looks a bit sexier
John1.8T
10-02-2007, 12:34 PM
Nice!
You should be able to pull the S4 badge off easily. I'm pretty sure they just snap on [:)].
madrussian
10-02-2007, 12:43 PM
you have to remove the bumper to swap grills?
this car is a pita.
do i have to remove the bumper to put lamin-x on the fogs too???
RS.Fez
10-02-2007, 12:47 PM
you have to remove the bumper to swap grills?
this car is a pita.
do i have to remove the bumper to put lamin-x on the fogs too???
no, those come off pretty easily.
John1.8T
10-02-2007, 12:48 PM
you have to remove the bumper to swap grills?
this car is a pita.
do i have to remove the bumper to put lamin-x on the fogs too???
hahaha - yes you do. Its not that bad once you do it a few times.
Just be PATIENT... there are 4 10mm bolts that are really hard to get at.
And yes you have to take the bumper off, fog lights out, bulbs out, and take the covers off to put lamin-x on...........
[:D] Kidding!
madrussian
10-02-2007, 01:00 PM
wait so do i or do i not take off the bumper to do lamin-x on the fogs?
i have a s-line... if that makes any diff.
RS.Fez
10-02-2007, 01:09 PM
way to confuse the poor guys John1.8T !!! lol
no you dont buddy....just two screws in the front of the fot light plastic
madrussian
10-02-2007, 01:10 PM
way to confuse the poor guys John1.8T !!! lol
no you dont buddy....just two screws in the front of the fot light plastic
sweet... just like the s4 than. thanks...
teknikk7
10-02-2007, 10:22 PM
You have to take the bumper off for everything. A lame design in my opinion.
madrussian
10-03-2007, 10:57 AM
im slow... but i just now got it.
remove bumper for main grill.
dont remove bumper for lower s-line grills (fogs)
right?