PDA

View Full Version : just got the new engine in, need help with boost lines! calling t3/t4 users!



ki11switch
09-19-2007, 04:36 PM
alright so i was up all night swapping my 130k engine out for a 35k engine. Anyways, it has a garrett t3/t4 on it with an external waste gate. Im a bit confused as to where all the boost lines should go to. Any help as to which boost lines go where on the turbo side would be great! Also i know my stock k03 and waste gate had 1 boost line coming off the turbo and 1 off the waste gate. Its alot different with a external waste gate and t3/t4

TQMB5
09-19-2007, 06:39 PM
your not going to be running this with a stock ecu and the 630cc injectors are you?

Poopie
09-19-2007, 08:26 PM
it will run on a stock ecu with a ford maf and the 630 injectors. NOT VERY GOOD, but i did this for 2 weeks when chris was fixing my ecu. This works if you are in a pinch.

your boost controler will go in between the external nipple and the nipple off a charge pipe or the compressor housing.