View Full Version : If you have a Bentley Manual for a B5 A4, please help

08-31-2007, 03:20 PM
Due to some oil sludge issues, I pulled the cam caps off and also pulled a connecting rod off to check the rod bearings. I want to put everything back together but I need torque specs.

If you have a Bentley manual and could look them up real quick, I'd really appreciate it.


08-31-2007, 05:58 PM
Give me your email addy and I can send you a zip file on the whole cd.

09-01-2007, 12:39 PM
which engine?

09-01-2007, 02:09 PM
id also be interested in those same TQ specs for the 1.8

09-01-2007, 02:09 PM
7 ft/lbs or 10nM for the 1.8 per the Bent...

09-01-2007, 02:23 PM
Sorry it was for the AWM. I assume you mean 7 ft-lbs for the cam caps? I found a spec for the rod caps of 30 N-m plus 1/4 turn. This sounds about right at least compared to some toyota 4-cylinders that I have build in the past, so that's what I used.

09-01-2007, 04:27 PM
Oh I totally missed the part that said rod caps... Sorry!!