View Full Version : Help! Engine question.

08-29-2007, 05:22 PM
Think only few may be to answer this. Well I have my short block at the machine shop now and their about to put in the scat rods and wiseco pistons. Problem is I took the motor apart few months ago and forgot which side the rod bearing tabs face. Also the notch on the piston. I looked at all the old stuff and it looks like the notch on the piston faces the intake side and the tangs on the bearing face the exhaust side. Correct me if im wrong.

PS- Scat rods, 034 coated rod bearings, and wiseco pistons.
Will call 034, but just wanted to see if someone could help.

08-30-2007, 04:55 AM
Bump -anybody

08-30-2007, 07:53 AM
best person to answer this question is Issam so I will try to let him know about this thread or you can try asking on his thread for his 2.2 build. That or you could see if he says on his 2.2 build thread on Vortex, here is the link (http://forums.vwvortex.com/zerothread?id=3335766&page=3)

So I am going to guess that you did not take pics as you tore it down?