PDA

View Full Version : ahhh shit



wafballa54
08-29-2007, 03:44 PM
i got water in the little plug for the maf the car in idle is bouncing rpms. if i just let it dry out will it be ok or did i screw up bad. all i did after washing the car was lift the hood and somehow water got in there. am i screwed or what?

MultiAudis
08-29-2007, 03:55 PM
I think it will prolly be ok, just let it dry off, give it a try, and report back

wafballa54
08-29-2007, 03:58 PM
well it's been disconnected drying for about 2 hours now i replugged and still ding the same thing...any help?

SurferForever
08-29-2007, 04:08 PM
your dbw, just leave it unplugged . . .

wafballa54
08-29-2007, 04:09 PM
for how long? should i do anything else or just let it go till the morning??

SurferForever
08-29-2007, 04:10 PM
let it go till the morning. if you want to go somewhere you should be alright if its not too too far because your map sensor will measure the amount of air that is going into the engine

wafballa54
08-29-2007, 04:49 PM
so what if it's still the same in the morning then what???

akielb
08-29-2007, 04:58 PM
get some MAF/electronic cleaner - and spray it off

wafballa54
08-29-2007, 05:11 PM
where can i find that at autozone???

akielb
08-29-2007, 05:22 PM
yep - any auto store should have it - I got it at NAPA
This is the brand I bought
http://www.amazon.com/CRC-Mass-Flow-Sensor-Cleaner/dp/B000EGH57G

bandit
08-29-2007, 07:33 PM
yo waf, clean it with electronic cleaner or rubbing alcohol.

AudiRacerS4
08-29-2007, 08:14 PM
your dbw, just leave it unplugged . . .

he is not DBW he is 99.5