PDA

View Full Version : some questions steering wheel/swaybar



Snow
08-07-2007, 06:59 PM
Installing a three spoke wheel on my car (early 98). Can I just unplug this thing or is there something special I have to do /disconect the bat etc...I was about to just pull the plug but had visions of this thing exploding in my face.

On another note I just installed some coilovers and noticed on the swaybar(passenger side)that it seemed bent upwards, when I dissconected it from the connecting link it was under some load and I needed a hammer to drive this apart. Is this normal as the drivers side was nothing like this.


If this is bent I will be upgrading both, so if someone has a set for sale or a good suggestion for a set let me know.

thanks

Kyle H
08-07-2007, 07:04 PM
H-sport swaybars- the only way to go. I'm not sure if you need to upgrade yours though.

What coilovers did you go with?

Snow
08-07-2007, 07:09 PM
tein basics, got a good deal on them and needed to lower the 4x4 asap.

Kyle H
08-07-2007, 07:44 PM
Haha, 4x4 is horrible. How do they handle? I was looking at those a while ago.

Kerschera4
08-07-2007, 07:59 PM
Installing a three spoke wheel on my car (early 98). Can I just unplug this thing or is there something special I have to do /disconect the bat etc...I was about to just pull the plug but had visions of this thing exploding in my face.


you should be fine. disconnect the battery if you are still worried

Snow
08-07-2007, 08:26 PM
will give it a shot, now I need to buy the correct size socket

Snow
08-07-2007, 09:21 PM
Haha, 4x4 is horrible. How do they handle? I was looking at those a while ago.

they get the job done, first ones i've had.

Snow
08-08-2007, 08:16 AM
can anybody tell me if a front sway bar has a bend on the passenger side? It makes no sense so I am going to assume its bent.

Kyle H
08-08-2007, 09:59 AM
it should look something like this-

http://img117.imageshack.us/img117/2028/swaybarhj6.jpg

I don't have my bluetooth hooked up on my computer anymore, so i can't take a picture for you. sorry!