PDA

View Full Version : Bigger Sidemount or Small front mount on a KKK.



Militant-Grunt
08-03-2007, 09:47 AM
Once I get my K04 back, I'm just going to save some money and go flat out for the Pc-16 file. (I have a old GIAC chip inside my ecu and its not eligible for the 200 dollar upgrade. So I figure if I'm going to spend 700 dollars on software it might as well be on the Pc-16.) I know a PC-16 file requires a front mount, but a K04 is quite small and with a front mount the turbo has to push harder to pass the air through all the tubing. (= more Lag) Wouldn't it be wiser to just get a bigger side mount?

jrodmk2
08-03-2007, 10:30 AM
all depends on pipe sizing, flow rate of intercooler....... technically yes but not really noticable if done right.

4ringAR
08-03-2007, 10:41 AM
is it wise to put a bigger side mount on a chipped K03? or should you just leave the stock sidemount on?

clconversion
08-03-2007, 10:46 AM
just remember you also need 310cc injectors with the pc 16 file

clconversion
08-03-2007, 10:47 AM
just remember you also need 310cc injectors with the pc 16 file

UN-PIMP-Z-A4
08-03-2007, 10:51 AM
i would go with a 2 inch cold side and hot side piping and core that has 2" inlet and outlet core. That should keep the air velocity high and not cause lag.

MultiAudis
08-03-2007, 11:09 AM
^^ We get it... LOL