View Full Version : injectors?

07-11-2007, 05:57 AM
what size injectors are needed for a p-16 file with the k04? 315cc? thanks

07-11-2007, 06:55 AM
Genesis 32lb(315cc)

07-11-2007, 07:35 AM
the file is tuned for Genesis 32lb(315cc) injectors

other injectors that are 315cc's have different spray patterns, which has been known to cause problems.

What? Not sure how you came up with them being "tuned" for Genesis injectors seeing that the PC-16 file was tuned more then 8 years ago and tested by AWE and the 2 owners of Turbo5(clark and dan) and both of those guys moved on to the subi market(clark in AZ) and Dan with Harman Motive.

The PC-16 was tuned for RC 310cc injectors but still ran rich on those injectors and they actually flowed like a set of 270cc injectors.

The Genesis 315cc injectors are the choice now because of the spray pattern but they did not come into play till the last year or so, before that people were using the injectors out of the 180hp Audi TT which are 317cc and the Bosch 310cc red top injectors.

With any of these injectors an adjustable FPR is needed to lower the fuel pressure below 3bar(2.6-2.8 bar) since the car runs too rich with a standard 3 bar fpr being used.

Hope all of this info has helped to fully understand about running the PC-16 file.

07-11-2007, 07:37 AM
keep me straight.