View Full Version : GTRS Hardware for the B5 AEB nDBW

06-08-2007, 07:39 PM
These are the hardware I have for the install - am I missing anything?[wrench]






Lazer Viking
06-08-2007, 08:32 PM
the turbo would help

06-08-2007, 08:37 PM
ahahah I have the dam turbo - and all the supporting stuff - just the install hardware is missing - i think there is it is missing some oil lines.

06-08-2007, 10:26 PM
You have to reuse stock oil lines.

06-09-2007, 12:39 AM
your install is going to be easy. without doing the ATP manifold I think you could knock it out in 3-4 hours start to driving it on the road. as long as you dont brake anything you should be fine. also remember to get oil and coolant/distilled water.

other than that you should be good to go.

06-09-2007, 02:24 AM
Then wth is the diffrence between a B6 install vs. a B5 hardware - i got the kit from someone who was scraping their B6 project - and this is the hardware that came with it - (so your telling me I've been trying to get help from like 3 suppliers and their shitty service to find what i've missing and been minor stressing about this thing for a month - for NOTHING)

Also gotaudi - do you know where I can pick up some G12 from other then the stealers - talking to them gets me constipated - the only place I know that is around where we live is purems - and that is like a 45 min drive for a 9 dollar bottle of coolant

also if you want me to let you know my experience with those 3 suppliers are please let me know - i don't think any of them contribute to this site - so i can bash them......... hehehe

06-09-2007, 03:05 PM
It seems that that the B5 kit comes with a steel coolant return


any help???

06-09-2007, 07:08 PM
Nope. Mine came with all black lines, no steel. All your hardware is correct.