PDA

View Full Version : CTapp software guys



aaronamerica
06-06-2007, 11:07 AM
have any of you guys besides ctapp with this software dynoed or went to the track yet, give us some update I would like to compare with my mika tune

Poopie
06-06-2007, 11:13 AM
i've taken wrxs, a bolt on srt4's and a lightly modded evo.

aaronamerica
06-06-2007, 03:22 PM
when your going to the track??? or at least dyno

94jedi
06-06-2007, 05:19 PM
sorry, no track times yet (not while running well anyway). high 12's shouldn't be a problem though.

*edit* to give you an idea - last night I beat (pretty badly despite not getting the kick) my buddy's chipped 06 GLI. BTW- I have a cracked exhaust mani so I'm making about 3 psi less than I should be.

dubiraq05
06-06-2007, 05:56 PM
i will be hitting the dyno next friday. only if mf afpr gets here by then.

Bigjuice
06-06-2007, 08:04 PM
I had Mika for a while, did a dyno run 280hp & 250lb/ft torq. It was running lean 16:1 @ 6K, redline is 7.5K this was 15lbs of boost. Basically an IED.

Switched to Tapp no dyno yet but ran a 12.3 at the track.
I've made some changes so when the motor in broken in then we'll see what numbers it'll do.

aaronamerica
06-06-2007, 10:17 PM
I had Mika for a while, did a dyno run 280hp & 250lb/ft torq. It was running lean 16:1 @ 6K, redline is 7.5K this was 15lbs of boost. Basically an IED.

Switched to Tapp no dyno yet but ran a 12.3 at the track.
I've made some changes so when the motor in broken in then we'll see what numbers it'll do.

very nice numbers what all did you have done back then??

aaronamerica
06-06-2007, 10:18 PM
i will be hitting the dyno next friday. only if mf afpr gets here by then.


please let us know how it goes

dubiraq05
06-07-2007, 03:45 AM
please let us know how it goes

will do if all goes well. i did a few logs a few days ago and i hit 111g/s on the maf in 3rd gear @7300 rpm. i guess 100g/s is right around 300 wheel. that was at 22psi

Bigjuice
06-07-2007, 07:22 AM
very nice numbers what all did you have done back then??

I was (& still) using a GT3071R, with the usual stuff. Nothing special .

CO AVANT
06-07-2007, 08:22 AM
sorry, no track times yet (not while running well anyway). high 12's shouldn't be a problem though.

*edit* to give you an idea - last night I beat (pretty badly despite not getting the kick) my buddy's chipped 06 GLI. BTW- I have a cracked exhaust mani so I'm making about 3 psi less than I should be.


Better get that fixed before something bad happens to your motor [;)]