PDA

View Full Version : part numbers needed



A4Mike
05-30-2007, 07:30 PM
I'm going to be replacing my upper control arms in about a week. I have a 99.5 1.8TQ 5-speed. After reading all of the write ups on this it sounds like there is one bolt that is a motherf*@&er to remove or you have to drill it out. I believe that it is the one that pinches the upper control arms to the knuckle. I want to get a new one just to be prepared. If anyone can give me the OEM part number for this bolt/nut that would be great. I have put together a bunch of parts to replace while I'm there: new tie rod ends, cv boot, bearings, etc. I also need the part number for a steering rack outer boot. TIA

blackaudia4tk
05-30-2007, 07:32 PM
call the dealer

bOOOOstedAudi
05-30-2007, 07:45 PM
ill get it tomorrow for you

A4Mike
05-30-2007, 08:03 PM
there is not an audi dealer near me, so I get some of my parts thru my local VW parts dept, but they can only look up by part number(so they tell me) since it is not a VW. thanks for the replys

Ewok_Fetus
05-30-2007, 08:07 PM
For the bolt it is

N 034 790 6 for up to VIN 8D-X-250000
N 034 790 7 for 250001 and up... So you will proabably need the -6 number

I would get new nuts too... N 102 861 02

As for the rack boots...

Drivers side 4D0 419 831 E
Passenger side 8D0 419 831 K

A4Mike
05-31-2007, 09:21 AM
For the bolt it is

N 034 790 6 for up to VIN 8D-X-250000
N 034 790 7 for 250001 and up... So you will proabably need the -6 number

I would get new nuts too... N 102 861 02

As for the rack boots...

Drivers side 4D0 419 831 E
Passenger side 8D0 419 831 K


Thanks that's exactly what I needed.

bOOOOstedAudi
05-31-2007, 09:32 AM
Damnit, He Beat Me To It