PDA

View Full Version : I pulled some codes...HELP



YardieAudiA4
05-27-2007, 09:15 AM
Hey guys, ive got the freware version of vag-com and i pulled these codes. I looked them up on audi world and it seems that they have to do wih my ground or something. Any how, any help would be great.
Here they are...

VAG-COM Version: Release 311.2-N

Control Module Part Number: 4B0 906 018 M
Component and/or Version: 1.8L R4/5VT G 0003
Software Coding: 16201
Work Shop Code: WSC 05136
3 Faults Found:
17763 - Cylinder 1 Ignition Circuit: Open Circuit
P1355 - 35-10 - - - Intermittent
17766 - Shareware Version. To Decode all DTCs
P1358 - 35-10 - Please Register/Activate - Intermittent
18010 - Shareware Version. To Decode all DTCs
P1602 - 35-10 - Please Register/Activate - Intermittent



Thanks Oteni

chris164935
05-27-2007, 09:38 AM
For future reference, you can look up all VAG-specific fault codes here: http://www.bentleypublishers.com/tech/audi/audi.dtc.table.htm

Anyway, The 17766 is Cylinder 2 Ignition Circuit: Open Circuit. Did you (or someone) try to start the car with those coils unplugged?
The 18010 code is Power Supply (B+) Terminal 30 Low Voltage. All these codes are intermittent meaning that they happen(ed) randomly. Clear the codes and drive the car for a day or two and see if they come back.

YardieAudiA4
06-08-2007, 07:12 AM
No we didnt remove any coilpacks, all of them are installed correctly. Maybe it's bad??

kjgarreau
06-08-2007, 08:40 AM
Just clear it first. Drive for a day, check again. Chances are they'll be gone.

YardieAudiA4
06-08-2007, 08:52 AM
I Did That And They Came Up A Day Later, And Then Icleared It Again, And It Came Back 5 Mins Later.. Could It Be My Coil Packs???