PDA

View Full Version : It's been a while...



Twelve Twenties
05-09-2007, 12:32 AM
When I first joined this forum it was about 3 years ago when Foo Fighter was running the show with Evil-Audi and his dirty Jersey crew. I jumped ship hopped into a couple dubs and I'm thinking about coming back with a B5 A4....

Siiince I've been out of the Audi world for a bit I haven't really kept up on the latest and I have a couple questions that need to be answered...

1. Who makes the lowest set of coil overs for the B5 A4? I beleive it's B&G?

2. Do they make a oil pan skid plate for the 2.8?

3. Does anyone have the rightup that cures the stoplight stalling issue? I beleive it was a dirty MAF or something...

4. Is there any camber adjustment for the front and rear of the B5 A4 chassis?

If anyone has some pictures of some suuuuper slammed A4's I'd appreciate a link or something...

crono35
05-09-2007, 01:17 AM
When I first joined this forum it was about 3 years ago when Foo Fighter was running the show with Evil-Audi and his dirty Jersey crew. I jumped ship hopped into a couple dubs and I'm thinking about coming back with a B5 A4....

Siiince I've been out of the Audi world for a bit I haven't really kept up on the latest and I have a couple questions that need to be answered...

1. Who makes the lowest set of coil overs for the B5 A4? I beleive it's B&G?

2. Do they make a oil pan skid plate for the 2.8?

3. Does anyone have the rightup that cures the stoplight stalling issue? I beleive it was a dirty MAF or something...

4. Is there any camber adjustment for the front and rear of the B5 A4 chassis?

If anyone has some pictures of some suuuuper slammed A4's I'd appreciate a link or something...

here's what I know..

1. my H&R's allow me to lower the car way further than it can be driven on.

2. there's a place that sells iron skid plates (takes the place of stock plastic underbelly dray)

3. don't know

4. The rear is adjustable to some degree I think, but the front isn't. If you want to slam it way down you'll need to get adjustable camber inserts (eccentric bushings or something or other).

98a4
05-09-2007, 05:38 AM
KW's allow me to run lower then anyone needs to with a decent ride. I wouldnt run anything else.
DG's panzer plate
MAF cleaning methods all over with >98% isoprocal alcohal
Yes, forget the name

http://i52.photobucket.com/albums/g8/blownbunny/1thanks064.jpg
23" Ground to fender with 1.5" of thread to go.

AudiSport12
05-09-2007, 09:13 AM
Koni coils on slmmda4's old 2.8q

http://i41.photobucket.com/albums/e277/kyleconn/DSCF0018.jpg
http://i41.photobucket.com/albums/e277/kyleconn/DSCF0020.jpg

Twelve Twenties
05-09-2007, 11:16 AM
KW's allow me to run lower then anyone needs to with a decent ride. I wouldnt run anything else.
DG's panzer plate
MAF cleaning methods all over with >98% isoprocal alcohal
Yes, forget the name
23" Ground to fender with 1.5" of thread to go.


Good information from both you guys., thank you much!

http://i52.photobucket.com/albums/g8/blownbunny/1thanks064.jpg

That looks fresh man! Just sent you a PM...

Anyone else?

Twelve Twenties
05-09-2007, 08:35 PM
Anyone?