PDA

View Full Version : For those of you with roled fenders....



97audia4
04-19-2007, 06:53 PM
I just put on a set of daytona rials, that are 18x8.5 and 225 40 18 tires, and I have H&R race springs with bilstien sport shocks, and the front is very close to hitting the fender, now those of you who have rolled fenders how much did it cost to do it at a shop, or did you do it yourself and how easy or hard was it to role them?

SeanF
04-19-2007, 07:21 PM
$75 corner is what GMPperformance.com charges

97audia4
04-19-2007, 07:31 PM
I wish they were around my area id go to them and have it done

bigBADblumsB5
04-19-2007, 07:36 PM
you could pay 300 to have it done or you can buy the tool for 250 and do it yourself, plus charge other people to do theres

http://www.eastwoodco.com/jump.jsp?itemID=6159&itemType=PRODUCT

seank
04-19-2007, 09:11 PM
don't know where in PA you are but these guys know their stuff and do great work.

http://www.bentmetalcustoms.com/home.html

Bent Metal Customs is located at:
1300 Schwab Road
Hatfield, PA 19440

215.412.9333

Poopie
04-19-2007, 09:58 PM
i used to live right there. WTF

onemoremile
04-20-2007, 07:53 AM
I paid 50 or 60 bucks to have a vw club member do it in my garage with his fender roller.

ExpLlclT
04-20-2007, 08:35 AM
im lowered on 8.5 with 235 tire without wheel gap between the fender and my tire , i rubbed but then i used a wooden baseball bat and evenly rolled my fenders slowly for free, i no longer rub just use a jack and lower your car on the wooden bat with a rag wrapped around it so you don't chip anything and roll it logicly

1 ate T
04-20-2007, 08:38 AM
im lowered on 8.5 with 235 tire without wheel gap between the fender and my tire , i rubbed but then i used a wooden baseball bat and evenly rolled my fenders slowly for free, i no longer rub just use a jack and lower your car on the wooden bat with a rag wrapped around it so you don't chip anything and roll it logicly

That's what I did.

bOOOOstedAudi
04-20-2007, 09:25 AM
I need mine rolled badly