Recommended CO install shop?

[4ringsinLA]

Just got into my new whip and had a Stasis Streetsport CO kit I've been waiting to install. The thing is, price is secondary in importance to quality of work. I want my ride height to be perfect. So, any recommendation?? [:D]

Oh yeah, looking for a good shop preferably in the LA area!

[evoic]

Just got into my new whip and had a Stasis Streetsport CO kit I've been waiting to install. The thing is, price is secondary in importance to quality of work. I want my ride height to be perfect. So, any recommendation?? [:D]

Oh yeah, looking for a good shop preferably in the LA area!

EuroCode Tuning in Torrance or Jose at.....someone help me out here.
Where does that guy work?
I hear his name every once in a while......
.
.

[Pure Euro]

If money aint a thing, GMG is absolutely top-quality.

[4ringsinLA]

does GMG do alignment and corner-balancing as well?

[oc-drop]

does GMG do alignment and corner-balancing as well?


At GMG, we offer complete suspension installation, alignments, track set-up, and corner weighing.

Call up Fabryce

[Rawkus_A4]

EuroCode Tuning in Torrance or Jose at.....someone help me out here.
Where does that guy work?
I hear his name every once in a while......
.
.

Jose @ Eurotech

[teamBOB]

dave @ eurocode installed the suspension on my b6.

[evoic]

I would avoid GMG like the plague.
Not that they do bad work but they are elitist, over-priced, and you can get the same quality job done elsewhere IMHO.
Search their name for a list of disatisfied posts.

Jose @ EuroTech or Dave @ eCode.
Both gentleman know as much about these cars as anyone you'll find.

[A4TwoZeroT]

go to eurocode.. let me borrow the tool.. [:D] i need to raise my car badly!! but Creative stole my tool and wont give it back to me

[B7AudiA4]

The guys at M1 Autobody/DTM Autohaus installed my Coilovers...
Took 2 hours (A little less because they weren't that busy) and the cost was not bad at all.. Just make sure what you want before you enter in and tell them.

[AudiA4Style]

PureMS or West End Alignments

[gods_kitchen]

Jose @ Eurotech

2nd! Jose is great to work with [up]

[4ringsinLA]

yea I said money was not an issue..until I found out a CO install was 450 [eek] I was assuming it would be around $350 for an install but 450 is pushing it....esp when it doesn't come wtih an alignment...guess I'll be shooting Eurocode an email/call about this. thanks for all the replies!!

o yeah, is this Eurotech you speak of in Campbell, CA??

[Calabria]

try Michael at ingolstadt west in the valley, perfectionist and his prices are pretty good

[gods_kitchen]

yea I said money was not an issue..until I found out a CO install was 450 [eek] I was assuming it would be around $350 for an install but 450 is pushing it....esp when it doesn't come wtih an alignment...guess I'll be shooting Eurocode an email/call about this. thanks for all the replies!!

o yeah, is this Eurotech you speak of in Campbell, CA??

Eurotech is in Culver City right next to the 405 on Washington Blvd

[jkimspe]

2nd! Jose is great to work with [up]


3rd! he just installed my vogtlands this past week. awesome work and great guy.

[ungucpho]

jose@ eurotech
fab@ef1 motorsports

[James@Creative]

We charge $355 for the CO install including an alignment. Check with EF1 I beleive they have a install and alignment combo.

Ask for Fab, tell him James @creative Sent ya!

[Quattro]

355 god damm!!!!!!!!! good work pay more?
i got a private mechanic who did mine on my b5 and he didnt charge me too much for allignment as well

[James@Creative]

355 god damm!!!!!!!!! good work pay more?
i got a private mechanic who did mine on my b5 and he didnt charge me too much for allignment as well


It's actually quite a bit of work, but like I said the price also includes an alignment. All of our customers also know that they get a free height adjustment as well... so shops charge upwards of $100 for the adjustment.

You take out the alignment, and you'll be down in the $275 range.

[tonelee1316]

try genesis autosports in rancho cucamonga pm whipped iam sure he will he will give u a good price

[exorcet]

Eric at Supreme Power parts installed mine for $250 - although I did purchase the CO's from him to so I don't know if that was reflected in the labor rate. He did a great job and was done in like 2 hours.

[IOKEPA]

for the LA area, definitely Euro-Tech Motors in Culver City and don't forget Torque Factory in Venice. yes, Jeff Moss is also a STaSIS dealer & installer in addition to all the GIAC/AWE goodies he sells.

[Dodge2Dub]

for the LA area, definitely Euro-Tech Motors in Culver City and don't forget Torque Factory in Venice. yes, Jeff Moss is also a STaSIS dealer & installer in addition to all the GIAC/AWE goodies he sells.

Does Jeff install simple CO's? When I talked to him, I didn't get that impression.

I have had good experiences with Eurocode and M1 and will continue to use them. One of my buddies had a good experience at Wicked. The guys at Ingostadt seemed to be decent when I went by their shop a couple of months ago, but I can't comment on their work.

Personally, I did not get a "warm fuzzy" with GMG when I spoke to them....definitely understand and agree with the statement that they have an elitist attitude. I drive an Audi, not a bimmer....leave the attitude at the door!

[alex310]

EF1 all the way, only person I have trusted with my last three cars is FAB! He charges $200-250 includes alignment. ef1motorsports.net

[IOKEPA]

Does Jeff install simple CO's? When I talked to him, I didn't get that impression.

I have had good experiences with Eurocode and M1 and will continue to use them. One of my buddies had a good experience at Wicked. The guys at Ingostadt seemed to be decent when I went by their shop a couple of months ago, but I can't comment on their work.

Personally, I did not get a "warm fuzzy" with GMG when I spoke to them....definitely understand and agree with the statement that they have an elitist attitude. I drive an Audi, not a bimmer....leave the attitude at the door!

i know he used to, then again he would probably only install the STaSIS stuff that he sells. i know for sure he installs the STaSIS big brake kits.

[ShadY12v]

Talk to mike or michael at Ingolstadt West if you want to have a positive installation experience. They go the extra mile to make sure you are happy!

[SteveMondragon]

Eurotech is in Culver City right next to the 405 on Washington Blvd

Isn't Eurotech on Pico, next to the 405? Or did Jose finally move to a new location? I haven't been there since last year but will be needing to get ahold of Jose to get my suspension out of my leased car here soon.

[B7AudiA4]

Jose (Master Tech.) at Euro-Tech Motors
11800 W. Pico Blvd.
Los Angeles (310)575-9705

Same place. =)

[IOKEPA]

Jose (Master Tech.) at Euro-Tech Motors
11800 W. Pico Blvd.
Los Angeles (310)575-9705

Same place. =)

correct name but WRONG/OLD address & phone

his new shop is at:

11407 W Washington Blvd
Culver City 90066
(310) 915-7600