PDA

View Full Version : Cutting stock moldings...



Audisport0808
04-09-2007, 06:35 PM
I know there's been a bunch of threads about S4 side skirts, but I can't find my answer in them. I just had my side skirts installed and dont have enough money right now for s4 door moldings. so I wanted to cut m,y stock A4 molding to fit the skirts a little better. Has anyone done that that can help me out, show pics, how much should I cut off etc.? Thanks a lot

SoFresh
04-09-2007, 09:44 PM
Take them off, and use a metal straight edge ruler, a long one, and tape it on tight, then use a xacto knife to cut it. Fairly simple, just take your time so the cut looks clean.

Bic-Ball
04-09-2007, 09:52 PM
good luck getting old ones off. took me half an hour to get two off. the screws siezed onto the bolts and i snapped a screw in half. depending on the blade, you might be able to get a nice cut from a table saw. that or the moulding will be torn to shreds :p

Audisport0808
04-10-2007, 03:07 PM
thanks, I guess I'll just cut off as much as it looks like I should cut off...