PDA

View Full Version : fault codes?



dubiraq05
04-06-2007, 11:38 PM
alright i need some help cause my vag-com is f--- up, so is my car. when im driving when i first start it up it sputters when i come on to boost. i was leaving the bar (dd) :( and this happened, got a cel, and i went wot and it accelerated just fine. i am running bkr7e's and it is super cold here 30 degrees. i got home and scanned it and came up with these codes, but it wont tell me what they are so any help would be appreciated.

n75 just hooked up and im not running a mbc anymore
my battery blows ( i think )

p1602
p0604
p1560
p1548
p1559
p0300 same code twice
p0301
p0303

any insite on these codes?

Poopie
04-07-2007, 08:06 AM
i had the same problems bro. its odd. Chris is fixing mine though. Th last 3 codes are for engine misfires, probably becase you didn't let the engine warm up. There is a throttle body code which i have also and an internal control module RAM malfunction. The first code is for a disconnected batter and andother code for the n75 not hooked up.

dubiraq05
04-07-2007, 01:57 PM
i had the same problems bro. its odd. Chris is fixing mine though. Th last 3 codes are for engine misfires, probably becase you didn't let the engine warm up. There is a throttle body code which i have also and an internal control module RAM malfunction. The first code is for a disconnected batter and andother code for the n75 not hooked up.

chris is sending me a new ecu for the same reasons. are having problems with your idle

Poopie
04-07-2007, 06:51 PM
I have to send him my ecu back. are you doing the same? I also have idle issues. it will idle at like 1400 rpm sometimes. I'm currently running a pc 16 ko4 chip.

dubiraq05
04-08-2007, 05:00 AM
he is sending me another board and i will have to send the one i have back. i got the same problems. what did he set ur rev limit at? mine is 7500 but i think he might have forgot that part.