PDA

View Full Version : Rear Foglight Mod Help



BzeB5A4
11-25-2006, 01:13 PM
Since it was a nice day here i decided i wanted to work on the car and i've been meaning to do the rear foglight mod.

But, I've ran into a problem.
Since my car is a 98.5, it looks liek i cant do it, but actually i think its possible.
Here's a pic from a 99.5, but im missing a small part.

http://i106.photobucket.com/albums/m248/BzeB5A4/BulbHousingMissing.jpg

What i want to know is, where can i get that metal clip/pin?

d_maniac
11-25-2006, 01:43 PM
a bulb goes in there...get it from autozone its either 1156 or 1157. Then cut the hole bigger in the tail light

BzeB5A4
11-25-2006, 01:49 PM
lol, your confused. That pictures is showing what is supposed to be there on a 99.5 car and my car is a 98.5 which is mising the little metal clip.

I know that i need to get the bulb(i already have it) and drill the plastic on the back of the headlight. But I dont have that metal clip on mine. So i wanted to know where to get it.

BzeB5A4
11-25-2006, 10:16 PM
help me out here guys, can i get that pin so i can do this mod?

Poopie
11-25-2006, 10:24 PM
you would have to fabricate a tab to complte the circuit. I have a 98.5 as well. I did too, but I can' remember where to connect the tab. Just look onthe other side and replicate it. Thats what I did. I would take a pic for you, but it i don't think I could get the bulb back in. I don't even know how I got it to work. Some scrap metal and tin foil are a good start.

BzeB5A4
11-25-2006, 10:46 PM
lol, thanks poopie

18T
11-30-2006, 08:06 PM
lol poopie made it work you can do it. ill help.