Rear heated seats

[SALWITDAB7]

Can some tell me how to swap the rear heated seats to another B7 with no heated seats ? Is it possible ?https://uploads.tapatalk-cdn.com/20250315/177d5aa3961cf40e5e85d2ee8ccbae63.jpghttps://uploads.tapatalk-cdn.com/20250315/20a3c6fce8da173105632458f112f7cc.jpghttps://uploads.tapatalk-cdn.com/20250315/21ad6938cbddd85bbd336cb3b184c9c2.jpghttps://uploads.tapatalk-cdn.com/20250315/a61037344fbbf52fad71a8186e1d1176.jpg

Sent from my SM-A156U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

[SALWITDAB7]

I Pulled the engine to Rebuilt it because my balance shaft failed

https://youtu.be/bTX99n7-uvs?si=rqRfuiVGVL8oXsiL

So I bought a donor car 2007 a4 b7 2.0t Quattro A/T & used the block ONLY & bought a new head & rebuilt it with new valves & springs ect..So.... 2 weeks later. I was able to finish it . It cranked up right away.
no codes . She was perfect [emoji108]Problem is the guy you seen the video. he was helping me rebuild it. I know very little about installing piston rings & honing the cylinders. But we ended up having our differences & we no longer talk or get along. But some how my key goes missing I know he took it from my house & I can't prove it so I switched out the doors from the donor & got a new ignition switch from audi dealer & it won't crank . SAFE" I'm stuck. I think the guy who did my ignition switch didnt do it right . I know what my car has. I replaced & checked everything. it's been sitting outside for over a year. So now im on my 2nd donor car. Bought another B7 A/T to swap Engine & Transmission now Im doing a swap because my car wouldn't crank.

Sent from my SM-A156U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

[Jayz691]

It won't crank, or won't start? Should be pretty straight forward, after programming the new keys. Safe means an immo issue.

Sent from my CPH2611 using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

[SALWITDAB7]

Dash lit up but no crank . I called a lock Smith & he said he couldn't get a read or login to my cars ecu . I also towed it to a Europe mechanic shop & they couldn't figure it out either.

Anyways I'm almost done with swap, I just need to switch the front axel's & the pedals . Do you know how do I get access to the wiring harness that goes to the pedals " clutch safety switch break switch & reverse lights " ? Or an easier way ? I think I've heard others cut up& modify their A/T harness . Right?

Sent from my SM-A156U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

[SALWITDAB7]

Here are the are the codes that I was able to pull up from the "no crank no start issue"https://uploads.tapatalk-cdn.com/20250316/ca6d1c15492e451e070d90cb3b65cb14.jpghttps://uploads.tapatalk-cdn.com/20250316/75d1e634ab4c7f822b6227e3b04c8183.jpghttps://uploads.tapatalk-cdn.com/20250316/937b900854e0aa531f4f23ceb657fb17.jpghttps://uploads.tapatalk-cdn.com/20250316/f5bc90b43396f8caa01c5924781cf02f.jpg

Sent from my SM-A156U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)