Audizine - An Automotive Enthusiast Community

Results 1 to 2 of 2
  1. #1
    Established Member Two Rings
    Join Date
    Nov 19 2013
    AZ Member #
    130946
    Location
    Rome, GA

    Help with some fault codes on my 2010 Audi Q5 3.2?

    Guest-only advertisement. Register or Log In now!
    I recently bought a used 2010 Audi Q5 3.2. The second day after purchasing the vehicle the check engine light comes on. I ran the codes and here's what I got:

    Address 01: Engine (J623-CALB) Labels:| 06E-907-559-CAL.clb
    Part No SW: 8R0 907 559 G HW: 8F0 907 559 A
    Component: 3.2 SIMOS8.2 H06 0004
    Revision: --------
    Coding: 0121000A190F0121
    Shop #: WSC 06335 000 00000
    ASAM Dataset: EV_ECM32FSI0218R0907559G 001004
    ROD: EV_ECM32FSI.rod
    VCID: 4487B1C2CF5B0766EE-8010

    3 Faults Found:
    6202 - EVAP System
    P0456 00 [236] - Very Small Leak Detected
    MIL ON - Intermittent - Confirmed - Tested Since Memory Clear
    Freeze Frame:
    Fault Status: 00000001
    Fault Priority: 2
    Fault Frequency: 2
    Mileage: 154617 km
    Date: 2017.10.20
    Time: 07:07:02

    Engine speed: 737.00 /min
    Normed load value: 25.1 %
    Vehicle speed: 0 km/h
    Coolant temperature: 26 C
    Intake air temperature: 15 C
    Ambient air pressure: 950 mbar
    Voltage terminal 30: 14.015 V
    Unlearning counter according OBD: 40
    Height correction: 949.8887 hPa
    Intake air temperature: 27.75 C
    Coolant temperature (unfiltered): 92.3 C
    Vehicle speed: actual: 88 km/h
    T_AST_ENVD: 514.00 s
    TEMP_CAT_ENVD[1]: 675.000000 C

    8931 - Secondary Air Injection System: Bank 1
    P0491 00 [237] - Insufficient Flow
    MIL ON - Confirmed - Tested Since Memory Clear
    Freeze Frame:
    Fault Status: 00000001
    Fault Priority: 2
    Fault Frequency: 1
    Mileage: 154617 km
    Date: 2017.10.20
    Time: 07:05:45

    Engine speed: 1344.00 /min
    Normed load value: 32.2 %
    Vehicle speed: 0 km/h
    Coolant temperature: 18 C
    Intake air temperature: 14 C
    Ambient air pressure: 950 mbar
    Voltage terminal 30: 12.695 V
    Unlearning counter according OBD: 40
    Engine speed: actual: 1184 /min
    MAF_ENVD: 266.90588 mg/stroke
    Coolant temperature (unfiltered): 33.0 C
    Engine: operating status: IS
    Battery voltage: 12.695313 V
    STATE_LS_ENVD[1]: 2

    8932 - Secondary Air Injection System: Bank 2
    P0492 00 [237] - Insufficient Flow
    MIL ON - Confirmed - Tested Since Memory Clear
    Freeze Frame:
    Fault Status: 00000001
    Fault Priority: 2
    Fault Frequency: 1
    Mileage: 154617 km
    Date: 2017.10.20
    Time: 07:05:45

    Engine speed: 1344.00 /min
    Normed load value: 32.2 %
    Vehicle speed: 0 km/h
    Coolant temperature: 18 C
    Intake air temperature: 14 C
    Ambient air pressure: 950 mbar
    Voltage terminal 30: 12.695 V
    Unlearning counter according OBD: 40
    Engine speed: actual: 1184 /min
    MAF_ENVD: 266.90588 mg/stroke
    Coolant temperature (unfiltered): 33.0 C
    Engine: operating status: IS
    Battery voltage: 12.695313 V
    STATE_LS_ENVD[1]: 2

    Readiness: 0000 0000

  2. #2
    Active Member Two Rings
    Join Date
    Oct 24 2017
    AZ Member #
    408827
    Location
    Singapore

    Contact Audi Dealers and shows it your car faults.

    mobile application designer | mobile development platforms
    Karl P
    HokuApps
    Mobile Application Development Platform
    Singapore



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.