Audizine - An Automotive Enthusiast Community

Page 4 of 5 FirstFirst ... 2345 LastLast
Results 121 to 160 of 165
  1. #121
    Senior Member Three Rings BG SQ5's Avatar
    Join Date
    Feb 21 2016
    AZ Member #
    369079
    My Garage
    '07 CBR1000RR
    Location
    PA

    Guest-only advertisement. Register or Log In now!
    With every waking minute, I warm up to the idea of a concave 20 more and more. I think I could really appreciate the more sidewall too.

    Btw- how have the two 103 bosses not posted their setups in this thread?!? Calling @staticuxo and @tcm glx
    '15 SQ5 Daytona Gray
    APR stage 2 (93 v4) - Fluidampr w/iABED 187mm - aFe filter/034 tube/modified box - MercRacing stacked h/x - AWE Touring
    21" Forgestar CF10s w/295s - 034 mounts, RSB & end links - Alu Kreuz - ecodes - deAuto LEDs - VCDS - P3
    12.054 @ 113.27 (-224 DA)

  2. #122
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    Itís become my favorite look Berk.

    Iím not sure if I put up my 21Ē 103 setup. Too hard to look on my cell.


    Mops on the move
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  3. #123
    Established Member Two Rings avimore's Avatar
    Join Date
    May 31 2016
    AZ Member #
    374094
    Location
    Australia

    Quote Originally Posted by Mops@SupremePower View Post
    Ed - The revised 103 will work without spacers. The DEEP 103 is no longer.

    Not as large, but you have smaller rotors, so they interfere almost just as much as the SQ ones.

    👍🏼
    Thanks for the info! I had no idea there was a revised concave option.

    On a related note, what kind of 102's did I get, deep concave or revised concave?

    In future, am I able to swap the 102's from my A5 and run them on the Q5 without spacers?


  4. #124
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    Quote Originally Posted by avimore View Post
    Thanks for the info! I had no idea there was a revised concave option.

    On a related note, what kind of 102's did I get, deep concave or revised concave?

    In future, am I able to swap the 102's from my A5 and run them on the Q5 without spacers?

    Certainly!

    You got the deep 102. There is no revised 102 at this time. The 103 was revised, and the 105/107 were introduced with the regular concave profile. The only deep ones that still exists are the 102 and 104. In the 20x10 ET30.

    You have the 3.0 Q5 with Brembos?
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  5. #125
    Veteran Member Four Rings tcm glx's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    214
    Location
    So Cal
    Items for Sale

    Quote Originally Posted by BG SQ5 View Post
    With every waking minute, I warm up to the idea of a concave 20 more and more. I think I could really appreciate the more sidewall too.

    Btw- how have the two 103 bosses not posted their setups in this thread?!? Calling @staticuxo and @tcm glx
    Im a fan of the 103!

    Untitled by Tony Rojo, on Flickr

    Audi Q5 by Tony Rojo, on Flickr
    2013 Audi Q5 2.0T Premium Ibis White/Chesnut Brown

  6. #126
    Senior Member Three Rings BG SQ5's Avatar
    Join Date
    Feb 21 2016
    AZ Member #
    369079
    My Garage
    '07 CBR1000RR
    Location
    PA

    Quote Originally Posted by tcm glx View Post
    Audi Q5 by Tony Rojo, on Flickr
    Here I am calling you a boss, and you post a pic of the old 265 front!
    '15 SQ5 Daytona Gray
    APR stage 2 (93 v4) - Fluidampr w/iABED 187mm - aFe filter/034 tube/modified box - MercRacing stacked h/x - AWE Touring
    21" Forgestar CF10s w/295s - 034 mounts, RSB & end links - Alu Kreuz - ecodes - deAuto LEDs - VCDS - P3
    12.054 @ 113.27 (-224 DA)

  7. #127
    Established Member Two Rings avimore's Avatar
    Join Date
    May 31 2016
    AZ Member #
    374094
    Location
    Australia

    Quote Originally Posted by Mops@SupremePower View Post
    You have the 3.0 Q5 with Brembos?
    2.0T Q5

    Quote Originally Posted by tcm glx View Post
    Untitled by Tony Rojo, on Flickr
    Looks so good!

  8. #128
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    Let's see your Vorsteiner VFF's!

    Yes, such a great look!


    Sent from my iPhone using Tapatalk
    Last edited by Mops@Nemesis; 12-08-2017 at 04:10 AM.
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  9. #129
    Veteran Member Four Rings tcm glx's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    214
    Location
    So Cal
    Items for Sale

    Quote Originally Posted by BG SQ5 View Post
    Here I am calling you a boss, and you post a pic of the old 265 front!
    Lol....you can barely tell in that picture! The car needs a wash bad, but once it gets one Iíll snap some new pictures!
    2013 Audi Q5 2.0T Premium Ibis White/Chesnut Brown

  10. #130
    Established Member Two Rings KillerQuattro's Avatar
    Join Date
    Dec 15 2016
    AZ Member #
    388342
    Location
    Morrison CO

    Waiting for Spring before I pull the trigger on a set of 105's in Titanium Machined finish.. Love that OEM+ look, and I think it will suit moonlight blue very nicely.. Couple weeks yet, and Ill have KW SC, Alu-Kreuz and spacers installed.. Can't wait!
    2013 Q5 3.0t- KW SC, Eurocode Alu Kreuz, 034 inlet/AWE filter, summer wheels to come!
    Sold: 2007 Ibis Avant- 2.0t 6mt, JHM HFC, TT DP, JHM HPFP, GFB+, B5 perch mod, 19x9 RS6, Hawk slotted rotors and performance pads.
    Sold: 1992 urS4- Garret 3071R, 034 tuning, RS2 goodies, 993TT BBK
    Sold: 1995 urS6- k26 hybrid turbo

  11. #131
    Senior Member Three Rings BG SQ5's Avatar
    Join Date
    Feb 21 2016
    AZ Member #
    369079
    My Garage
    '07 CBR1000RR
    Location
    PA

    Quote Originally Posted by KillerQuattro View Post
    Waiting for Spring before I pull the trigger on a set of 105's in Titanium Machined finish.. Love that OEM+ look
    So you're going to pay the extra $600+ for that finish on a 20 or run a 19?
    '15 SQ5 Daytona Gray
    APR stage 2 (93 v4) - Fluidampr w/iABED 187mm - aFe filter/034 tube/modified box - MercRacing stacked h/x - AWE Touring
    21" Forgestar CF10s w/295s - 034 mounts, RSB & end links - Alu Kreuz - ecodes - deAuto LEDs - VCDS - P3
    12.054 @ 113.27 (-224 DA)

  12. #132
    Senior Member Three Rings chuthis's Avatar
    Join Date
    Nov 30 2012
    AZ Member #
    105018
    Location
    socal

    Joining the club, courtesy of Mops! Although this will be for my S4, I felt like sharing here anyway haha.

    VFF103 in brushed aluminum

    Thanks Mops!

    Sent from my Pixel XL using Tapatalk
    10' S4 | 14' SQ5

  13. #133
    Senior Member Two Rings
    Join Date
    May 06 2015
    AZ Member #
    331368
    Location
    Minnesota

    Quote Originally Posted by chuthis View Post
    Joining the club, courtesy of Mops! Although this will be for my S4, I felt like sharing here anyway haha.

    VFF103 in brushed aluminum

    Thanks Mops!

    Sent from my Pixel XL using Tapatalk
    I've seen that finish in person and it's awesome! Congrats, I'm jealous. Wanting to put those on my S4 but just haven't pulled the trigger..........................yet.
    2013 Estoril Blue S4 | DSG | Carbon Inlays | Sport Diff | B&O | Black Nappa | 3M Clear Bra | 50% tint | Deval Diffuser | Lamin-x tail light tint | AWE touring + res downpipes | Bilstein B12 pro kit | AWE intake

    2014 SQ5 (wife's ride)

  14. #134
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    Hell yea Joe!! Gonna look nutty on the S4! You should do a thread.
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  15. #135
    Established Member Two Rings KillerQuattro's Avatar
    Join Date
    Dec 15 2016
    AZ Member #
    388342
    Location
    Morrison CO

    Quote Originally Posted by BG SQ5 View Post
    So you're going to pay the extra $600+ for that finish on a 20 or run a 19?
    Good question. I actually wasn't aware of an extra charge for their "Standard Finishes".. But yeah, I plan to go 20x10 and still want that finish, or a comparable silver that matches the window surrounds and roof rails. If I need to drop an extra $600 for the look I want, then so be it.. I'm not dropping $6k on a set of HRE forged, so I think the $600 for a proper finish on 105's is a good compromise.. I personally don't like the BO/murdered out look, it all just gets too dark for my taste and I feel dark wheels tend to look dirty.
    2013 Q5 3.0t- KW SC, Eurocode Alu Kreuz, 034 inlet/AWE filter, summer wheels to come!
    Sold: 2007 Ibis Avant- 2.0t 6mt, JHM HFC, TT DP, JHM HPFP, GFB+, B5 perch mod, 19x9 RS6, Hawk slotted rotors and performance pads.
    Sold: 1992 urS4- Garret 3071R, 034 tuning, RS2 goodies, 993TT BBK
    Sold: 1995 urS6- k26 hybrid turbo

  16. #136
    Senior Member Three Rings BG SQ5's Avatar
    Join Date
    Feb 21 2016
    AZ Member #
    369079
    My Garage
    '07 CBR1000RR
    Location
    PA

    Quote Originally Posted by KillerQuattro View Post
    Good question. I actually wasn't aware of an extra charge for their "Standard Finishes".. But yeah, I plan to go 20x10 and still want that finish, or a comparable silver that matches the window surrounds and roof rails. If I need to drop an extra $600 for the look I want, then so be it.. I'm not dropping $6k on a set of HRE forged, so I think the $600 for a proper finish on 105's is a good compromise.. I personally don't like the BO/murdered out look, it all just gets too dark for my taste and I feel dark wheels tend to look dirty.
    Yeah- definitely want to familiarize yourself with what specs and finishes are available OTS for each wheel. Just because titanium machine is a 'standard finish' doesn't mean they do a production run of the wheel you want with it. In fact, most of their fitments are only offered in one finish. Always best to know what's available before getting your hopes up. Of course for more money, anything is possible.

    For the record- the 20x10 et30 105 (that only comes in carbon graphite for the normal price) needs a 10mm spacer to clear the SQ front brakes, and that's a lot of poke. I'm not sure what it will take on the Q5. Once again- educate yourself on what the options are before getting set on something. You might be saving money over HREs even after a refinish, but if it's not a good fitment, what's the point?
    '15 SQ5 Daytona Gray
    APR stage 2 (93 v4) - Fluidampr w/iABED 187mm - aFe filter/034 tube/modified box - MercRacing stacked h/x - AWE Touring
    21" Forgestar CF10s w/295s - 034 mounts, RSB & end links - Alu Kreuz - ecodes - deAuto LEDs - VCDS - P3
    12.054 @ 113.27 (-224 DA)

  17. #137
    Senior Member Three Rings chuthis's Avatar
    Join Date
    Nov 30 2012
    AZ Member #
    105018
    Location
    socal

    Quote Originally Posted by Mops@SupremePower View Post
    Hell yea Joe!! Gonna look nutty on the S4! You should do a thread.
    Thanks Mops! Maybe I'll throw something together once I get some decent photos.

    I want to do a set of 107's for the SQ now. Maybe next year... lol.

    Sent from my Pixel XL using Tapatalk
    10' S4 | 14' SQ5

  18. #138
    Established Member Two Rings KillerQuattro's Avatar
    Join Date
    Dec 15 2016
    AZ Member #
    388342
    Location
    Morrison CO

    Quote Originally Posted by BG SQ5 View Post
    Yeah- definitely want to familiarize yourself with what specs and finishes are available OTS for each wheel. Just because titanium machine is a 'standard finish' doesn't mean they do a production run of the wheel you want with it. In fact, most of their fitments are only offered in one finish. Always best to know what's available before getting your hopes up. Of course for more money, anything is possible.

    For the record- the 20x10 et30 105 (that only comes in carbon graphite for the normal price) needs a 10mm spacer to clear the SQ front brakes, and that's a lot of poke. I'm not sure what it will take on the Q5. Once again- educate yourself on what the options are before getting set on something. You might be saving money over HREs even after a refinish, but if it's not a good fitment, what's the point?
    Yeah, I already have some 12mm(F)/15mm(R) Supreme spacers from Mops to fit the stock 19's a little better once I drop it down with the KW SC's in a couple weeks. He said those spacers will also work for the V-FF applications. The Q5 s-line has brembos, so those spacers are definitely needed for my application. Would the poke with the 105's be any greater than any other V-FF 20x10 et30 setup? I love all the photos in this thread with meaty tires on 20x10's with 295/40/20 mounted. That's the look I'm after..
    2013 Q5 3.0t- KW SC, Eurocode Alu Kreuz, 034 inlet/AWE filter, summer wheels to come!
    Sold: 2007 Ibis Avant- 2.0t 6mt, JHM HFC, TT DP, JHM HPFP, GFB+, B5 perch mod, 19x9 RS6, Hawk slotted rotors and performance pads.
    Sold: 1992 urS4- Garret 3071R, 034 tuning, RS2 goodies, 993TT BBK
    Sold: 1995 urS6- k26 hybrid turbo

  19. #139
    Senior Member Three Rings BG SQ5's Avatar
    Join Date
    Feb 21 2016
    AZ Member #
    369079
    My Garage
    '07 CBR1000RR
    Location
    PA

    Quote Originally Posted by KillerQuattro View Post
    The Q5 s-line has brembos, so those spacers are definitely needed for my application. Would the poke with the 105's be any greater than any other V-FF 20x10 et30 setup? I love all the photos in this thread with meaty tires on 20x10's with 295/40/20 mounted. That's the look I'm after..
    You have to subtract whatever spacer you use from your offset. Personally, with a 10" and 295, et28 is my limit. Some guys are running 10.5" and 295 in the mid 20s offset, but once you get down close 20, it needs some decent camber to counter obvious poke.

    The Q5 brembos are smaller than the SQ5 calipers, so you shouldn't need as much spacer. Based on the DEEP 103s posted in this thread, the SQ5 needs a 10mm spacer up front and the Q5 only needs a 5mm. If you can get away with a 5mm to bring it to et25, you'll be perfect with the 295. et18 is too much IMO...definitely without fender lips. There's 10" 103s and 102s posted in here with et20 and et18 respectively but both only have 275s.

    I believe this 10" 103 is at et25 with 295s...pretty obvious poke here too. If that's what you want, you're set.

    Quote Originally Posted by Mops@SupremePower View Post
    NO.- by Audiyos, on Flickr
    '15 SQ5 Daytona Gray
    APR stage 2 (93 v4) - Fluidampr w/iABED 187mm - aFe filter/034 tube/modified box - MercRacing stacked h/x - AWE Touring
    21" Forgestar CF10s w/295s - 034 mounts, RSB & end links - Alu Kreuz - ecodes - deAuto LEDs - VCDS - P3
    12.054 @ 113.27 (-224 DA)

  20. #140
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    Berk that is 20x10 ET30 with a 10mm spacer up front 👍🏼

    - - - Updated - - -

    Quote Originally Posted by chuthis View Post
    Thanks Mops! Maybe I'll throw something together once I get some decent photos.

    I want to do a set of 107's for the SQ now. Maybe next year... lol.

    Sent from my Pixel XL using Tapatalk
    We'll see 107s on a SQ very soon 😎
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  21. #141
    Senior Member Three Rings BG SQ5's Avatar
    Join Date
    Feb 21 2016
    AZ Member #
    369079
    My Garage
    '07 CBR1000RR
    Location
    PA

    Quote Originally Posted by Mops@SupremePower View Post
    Berk that is 20x10 ET30 with a 10mm spacer up front 👍🏼
    Ahh, thanks for the correction. I was thinking it was this same one...

    Quote Originally Posted by Qumag View Post
    VFF-103 20x10 deep concave w/ 295's Falken tires. Sitting on H&R springs with 5mm spacers and barely cleared the front brembo's..:) It works!
    [IMG]
    Btw- what do you know about the 109 and 110?? Found this... https://scontent-lga3-1.cdninstagram...38119936_n.jpg
    '15 SQ5 Daytona Gray
    APR stage 2 (93 v4) - Fluidampr w/iABED 187mm - aFe filter/034 tube/modified box - MercRacing stacked h/x - AWE Touring
    21" Forgestar CF10s w/295s - 034 mounts, RSB & end links - Alu Kreuz - ecodes - deAuto LEDs - VCDS - P3
    12.054 @ 113.27 (-224 DA)

  22. #142
    Established Member Two Rings KillerQuattro's Avatar
    Join Date
    Dec 15 2016
    AZ Member #
    388342
    Location
    Morrison CO

    Quote Originally Posted by BG SQ5 View Post
    You have to subtract whatever spacer you use from your offset. Personally, with a 10" and 295, et28 is my limit. Some guys are running 10.5" and 295 in the mid 20s offset, but once you get down close 20, it needs some decent camber to counter obvious poke.

    The Q5 brembos are smaller than the SQ5 calipers, so you shouldn't need as much spacer. Based on the DEEP 103s posted in this thread, the SQ5 needs a 10mm spacer up front and the Q5 only needs a 5mm. If you can get away with a 5mm to bring it to et25, you'll be perfect with the 295. et18 is too much IMO...definitely without fender lips. There's 10" 103s and 102s posted in here with et20 and et18 respectively but both only have 275s.

    I believe this 10" 103 is at et25 with 295s...pretty obvious poke here too. If that's what you want, you're set.
    Great information! Thanks for the info on the brakes. 5mm spacers with the 275's might actually be what i end up with. Also not after too much poke, so good call out there..

    Probably looking for something more like Vics setup. You think the 105's with 275's using 5mm spacers up front (final et25) would look closer to this?

    Sent from my SM-N920P using Tapatalk
    2013 Q5 3.0t- KW SC, Eurocode Alu Kreuz, 034 inlet/AWE filter, summer wheels to come!
    Sold: 2007 Ibis Avant- 2.0t 6mt, JHM HFC, TT DP, JHM HPFP, GFB+, B5 perch mod, 19x9 RS6, Hawk slotted rotors and performance pads.
    Sold: 1992 urS4- Garret 3071R, 034 tuning, RS2 goodies, 993TT BBK
    Sold: 1995 urS6- k26 hybrid turbo

  23. #143
    Veteran Member Three Rings Maddog3xx8's Avatar
    Join Date
    Sep 02 2009
    AZ Member #
    47217
    Location
    Ashland MA

    Quote Originally Posted by KillerQuattro View Post
    Great information! Thanks for the info on the brakes. 5mm spacers with the 275's might actually be what i end up with. Also not after too much poke, so good call out there..

    Probably looking for something more like Vics setup. You think the 105's with 275's using 5mm spacers up front (final et25) would look closer to this?

    Sent from my SM-N920P using Tapatalk
    I like this look.. 285swould look a little more meaty... Assuming less poke?
    B8 SQ5 - EPL Stage 2 Tune / AWE 102mm Touring Exhaust / Roc Euro Intake / V-FF 102s 20x10 / DWS 295/40/20 / Supreme 12mm Spacers All Around / KW HAS /

  24. #144
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    Let's see your Vorsteiner VFF's!

    Quote Originally Posted by BG SQ5 View Post
    Ahh, thanks for the correction. I was thinking it was this same one...

    Btw- what do you know about the 109 and 110?? Found this...
    Same Q5. I sold Robie 10mm spacers, and was not certain. Looks pretty awesome with the 5mm and 295!

    The 108 is decent IMO. Only smaller diameters for now. I've not seen that 109. Major Brixton rip, but it looks great!
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  25. #145
    Active Member One Ring
    Join Date
    Oct 13 2017
    AZ Member #
    408373
    Location
    DFW Texas

    Just arrived! Fully brushed with a tinted clear.



    Itís Pouring down rain all day today but just got them installed and I had to snap a quick pic! .



    Best,
    C.

  26. #146
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    ^Hell yea! 👍🏼
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  27. #147
    Senior Member Three Rings chuthis's Avatar
    Join Date
    Nov 30 2012
    AZ Member #
    105018
    Location
    socal

    More pics of those 107's! That finish looks amazing!

    Sent from my Pixel XL using Tapatalk
    10' S4 | 14' SQ5

  28. #148
    Active Member One Ring
    Join Date
    Oct 13 2017
    AZ Member #
    408373
    Location
    DFW Texas

    Let's see your Vorsteiner VFF's!

    Sorry for the delay, took forever to get a day to clean up the Q.

    Here's a few more pics.

    Best,
    Chris





    Sent from my iPad using Tapatalk
    Last edited by charliekilo98; 01-05-2018 at 11:07 AM.

  29. #149
    Veteran Member Four Rings VroomVroom's Avatar
    Join Date
    Jan 03 2007
    AZ Member #
    14579
    Location
    SF Bay Area, CA

    ^ That really looks fantastic. Kudos! Great wheel choice that totally enhances the look of the vehicle.

    I've looked at the pics a couple of times now...the red center caps and calipers are doing tricks on my eyes, giving the illusion that some of the spokes in the wheels are red as well.
    -Jerry
    '16 SQ5 P+. Glacier White; Tech, Nappa, Black Optics, 21's.
    > H&R/Bilstein, Conti/BBS, various VCDS tidbits.
    (Formerly)13' Q5 3.0T '12 Q5 3.2, '08 A4 Avant 3.2, '06 A4 Avant 3.2.

  30. #150
    Active Member Two Rings
    Join Date
    Nov 28 2016
    AZ Member #
    386951
    Location
    Chico, CA

    Quote Originally Posted by charliekilo98 View Post
    Just arrived! Fully brushed with a tinted clear.



    Itís Pouring down rain all day today but just got them installed and I had to snap a quick pic! .



    Best,
    C.
    What wheel and tire sizes are you running? Looks good! Mops set me up with the 107's in Carbon Graphite in ET30. Waiting to decide on tire size. Lots of choices in 275/40-20, not as many in 295/40-20 and really only one in 285/40-20. Hoping to not need spacers. Next week I am hoping to mount just a wheel in the front to do some clearance measurements.

    Any suggestions?

    We have the Daytona Gray Metallic and are anxious to get those Carbon Graphites on!
    Last edited by Glen9010; 01-06-2018 at 08:31 PM.

  31. #151
    Active Member One Ring
    Join Date
    Oct 13 2017
    AZ Member #
    408373
    Location
    DFW Texas

    Iím running 20x9 et21 with 255-45-20 conti dws06s.

    Canít wait to see yours with the carbons! Itís going to look great!

  32. #152
    Active Member Two Rings
    Join Date
    Jan 18 2018
    AZ Member #
    412664
    Location
    TX

    20x10 ET35 with 5mm in rear

    IMG_4752.jpgIMG_4753.jpgIMG_4768.JPGIMG_4797.jpgIMG_4806.JPGIMG_4807.JPG


    Sent from my iPhone using Audizine

  33. #153
    Stage 2 Banner Advertiser Four Rings Mops@Nemesis's Avatar
    Join Date
    Sep 28 2010
    AZ Member #
    64971
    My Garage
    '18 S4, '16 SQ5
    Location
    Winston Salem NC

    They look good John!
    034Motorsport | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | TSW | Volk | Vorsteiner | Work | and many more


  34. #154
    Active Member Two Rings
    Join Date
    Jan 18 2018
    AZ Member #
    412664
    Location
    TX

    Thanks for your help Mops!


    Sent from my iPhone using Audizine

  35. #155
    Veteran Member Four Rings VroomVroom's Avatar
    Join Date
    Jan 03 2007
    AZ Member #
    14579
    Location
    SF Bay Area, CA

    Jmals, just confirming the spec. It could be my eyes or an illusion from the pics, but that looks more aggressive than +35mm/+30mm. Am I crazy?
    -Jerry
    '16 SQ5 P+. Glacier White; Tech, Nappa, Black Optics, 21's.
    > H&R/Bilstein, Conti/BBS, various VCDS tidbits.
    (Formerly)13' Q5 3.0T '12 Q5 3.2, '08 A4 Avant 3.2, '06 A4 Avant 3.2.

  36. #156
    Senior Member Three Rings Qumag's Avatar
    Join Date
    Dec 11 2014
    AZ Member #
    301898
    My Garage
    15' Macan Turbo, 17' VW Golf Alltrack
    Location
    Darien, IL

    Love me some Mops!

    My first set VFF103


    2nd set VFF107 For the Macan Turbo




    Sent from my iPhone using Tapatalk

  37. #157
    Senior Member Three Rings Qumag's Avatar
    Join Date
    Dec 11 2014
    AZ Member #
    301898
    My Garage
    15' Macan Turbo, 17' VW Golf Alltrack
    Location
    Darien, IL

    Quote Originally Posted by VroomVroom View Post
    Jmals, just confirming the spec. It could be my eyes or an illusion from the pics, but that looks more aggressive than +35mm/+30mm. Am I crazy?
    Mine was ET +30 with 5mm spacers = +25 offset


    Sent from my iPhone using Tapatalk

  38. #158
    Active Member Two Rings
    Join Date
    Jan 18 2018
    AZ Member #
    412664
    Location
    TX

    Quote Originally Posted by VroomVroom View Post
    Jmals, just confirming the spec. It could be my eyes or an illusion from the pics, but that looks more aggressive than +35mm/+30mm. Am I crazy?
    Good eye, shows how much I remember about my own car Iím ET30. +5 rears. Sorry!


    Sent from my iPhone using Audizine

  39. #159
    Senior Member Three Rings Qumag's Avatar
    Join Date
    Dec 11 2014
    AZ Member #
    301898
    My Garage
    15' Macan Turbo, 17' VW Golf Alltrack
    Location
    Darien, IL

    Quote Originally Posted by Jmals View Post
    Good eye, shows how much I remember about my own car Iím ET30. +5 rears. Sorry!


    Sent from my iPhone using Audizine
    Make sense! Do you consider adding the fender protector wing? It makes a big difference.

  40. #160
    Active Member Two Rings
    Join Date
    Jan 18 2018
    AZ Member #
    412664
    Location
    TX

    Quote Originally Posted by Jmals View Post
    Corrected, complete specs because I have no idea about my own wheels

    VFF-103s 20x10 et30 +5 on rears
    Conti DSW 06 275
    Stock ride height


    Sent from my iPhone using Audizine

Page 4 of 5 FirstFirst ... 2345 LastLast


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.