Audizine - An Automotive Enthusiast Community

Page 279 of 301 FirstFirst ... 179229269277278279280281289 ... LastLast
Results 11,121 to 11,160 of 12034
  1. #11121
    Veteran Member Four Rings tankdeer's Avatar
    Join Date
    Aug 18 2009
    AZ Member #
    46582
    My Garage
    A Unicorn
    Location
    Portland, OR

    Guest-only advertisement. Register or Log In now!
    Test pipes have a tendency to smell as well, whereas a HFC won't. Or at least, won't much. And it will definitely change the sound. A cat muffles sound like anything else in your exhaust
    Negative Ghostrider, the pattern is full

    :: Seller feedback ::

    His: Nothing. Still searching
    Hers: 2008 Ibis Ti Avant 6MT - Bagged Unicorn
    RIP: 2006 DG Avant Tip

  2. #11122
    Established Member Three Rings wjg22's Avatar
    Join Date
    Apr 14 2016
    AZ Member #
    371825
    My Garage
    '01 Monster 750
    Location
    Pittsburgh

    Quote Originally Posted by Gosser View Post
    They are studs and replaceable. I just did it.
    ECS doesnt seem to sell them separately, but they cant be expensive from the dealer.
    Okay, thanks I'll have to give them a call. I looked briefly on GAP but I didn't see the actual bolts on the diagrams.

  3. #11123
    Established Member Two Rings mr_Law's Avatar
    Join Date
    Feb 13 2014
    AZ Member #
    145164
    Location
    bronx ny

    Quote Originally Posted by tankdeer View Post
    Test pipes have a tendency to smell as well, whereas a HFC won't. Or at least, won't much. And it will definitely change the sound. A cat muffles sound like anything else in your exhaust
    Smell how? A smell that comes into the car or stays outside?


    Sent from my iPhone using Tapatalk

  4. #11124
    Established Member Three Rings wjg22's Avatar
    Join Date
    Apr 14 2016
    AZ Member #
    371825
    My Garage
    '01 Monster 750
    Location
    Pittsburgh

    And so it begins...

  5. #11125
    Senior Member Four Rings Ashtonts's Avatar
    Join Date
    Jan 17 2015
    AZ Member #
    309840
    Location
    CT

    Quote Originally Posted by mr_Law View Post
    Smell how? A smell that comes into the car or stays outside?


    Sent from my iPhone using Tapatalk
    Both. Mostly noticeable outside but can be smelled at idle sometimes.


    Sent from my iPhone using Tapatalk
    2005.5 A4 2.0T Brilliant Red | 6MT | Quattro | DTM
    Go: K04 | ST Coilovers | Carbonio | Maestro | S3 Injectors | IE Rods | JHM FMIC | Autotech HPFP | ECS SS | JHM Clutch | USP HFC | Quad-tip Exhaust | S4 Brakes
    Show: Panda Recaros | RS4 Grille | Votex Spoiler | OEM CF Trim | S4 Mirrors | Black Ext. Trim | Bixenons | LED Tails | A8 Rings | RNSe | 20% Tint | BFI Shift Knob | 034 Adj. UCAs | Ziza LEDs

  6. #11126
    Veteran Member Four Rings tankdeer's Avatar
    Join Date
    Aug 18 2009
    AZ Member #
    46582
    My Garage
    A Unicorn
    Location
    Portland, OR

    Quote Originally Posted by Ashtonts View Post
    Both. Mostly noticeable outside but can be smelled at idle sometimes.


    Sent from my iPhone using Tapatalk
    This. Some people are bothered by it, some are not. But it's something to be aware of.
    Negative Ghostrider, the pattern is full

    :: Seller feedback ::

    His: Nothing. Still searching
    Hers: 2008 Ibis Ti Avant 6MT - Bagged Unicorn
    RIP: 2006 DG Avant Tip

  7. #11127
    Established Member Three Rings
    Join Date
    May 20 2017
    AZ Member #
    399735
    Location
    New Hampshire

    Recirc AC takes care of the in cabin smell. It's just everyone else who has to smell it.

    I run a test pipe now but will probably switch to a high flow cat when I do my turbo back next year.

  8. #11128
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by EvolutionArmory View Post
    Recirc AC takes care of the in cabin smell. It's just everyone else who has to smell it.

    I run a test pipe now but will probably switch to a high flow cat when I do my turbo back next year.
    Screw other people that has to smell it.......

    When you over your gonna miss that test pipe. Your probably gonna rite back over once you feel the difference in in the spool up time
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  9. #11129
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by Ashtonts View Post
    Both. Mostly noticeable outside but can be smelled at idle sometimes.
    I learned my lesson. Stuck in traffic while ing . Roll up the windows and turn on the ac and recycle the cabin air........
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  10. #11130
    Established Member Three Rings
    Join Date
    May 20 2017
    AZ Member #
    399735
    Location
    New Hampshire

    Quote Originally Posted by vce1232000 View Post
    Screw other people that has to smell it.......

    When you over your gonna miss that test pipe. Your probably gonna rite back over once you feel the difference in in the spool up time
    I probably will but as silly as it may seem I feel a little guilty running one 😀

  11. #11131
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by EvolutionArmory View Post
    I probably will but as silly as it may seem I feel a little guilty running one 😀
    This says the man that firearms ............ Really ................
    If you do massive amounts of recycling or grow some vegetables you get a free pass to use the test pipe ...... I do massive amount of recycling our garbage. And we utilize solar energy in our home.....
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  12. #11132
    Senior Member Three Rings klrider44's Avatar
    Join Date
    Aug 20 2014
    AZ Member #
    276508
    Location
    Doylestown PA

    When putting the intake manifold back on is it best to seat the injectors in the rail before it goes back on or place them in the engine prior to putting the manifold on? I'm having a bit of a hard time getting the manifold back on.


    Sent from my iPhone using Audizine

  13. #11133
    Veteran Member Four Rings dalmation53's Avatar
    Join Date
    Aug 20 2013
    AZ Member #
    121389
    My Garage
    Audi A4 B7
    Location
    Orlando, FLORIDA

    Quote Originally Posted by tankdeer View Post
    This. Some people are bothered by it, some are not. But it's something to be aware of.
    I'm never with my windows down because i hate it and i like the A\C on my face. So if put a test pipe on the ride i shouldn't have problems since i'm never with the widnows down correct?

    Sent from my SM-G925T using Audizine mobile app
    Ivan

  14. #11134
    Veteran Member Four Rings canadianA4B7's Avatar
    Join Date
    Feb 10 2012
    AZ Member #
    87997
    My Garage
    parts
    Location
    CANADA
    Items for Sale

    Quote Originally Posted by klrider44 View Post
    When putting the intake manifold back on is it best to seat the injectors in the rail before it goes back on or place them in the engine prior to putting the manifold on? I'm having a bit of a hard time getting the manifold back on.


    Sent from my iPhone using Audizine
    Place injectors in the head, be sure to check all the blue or black rubber pieces came out of the fuel rail. I usually place it all in there loose make sure your not pinching the injector wiring harness from below the cam sensor wire can move during this install. Once it's all out of the way and your clear of the oil level tube it will take a bit of weight but it will all press together. The 2 studs will have approx 3 threads showing, as you tighten these it will pull everything snug. Be sure to torque correctly. I start in the centre and make a swirl type of motion working my way outwards. So top then bottom center the go left of centre, then right of center.
    4 turbos (soon 5), 2 motors, 1 B7 A4

  15. #11135
    Senior Member Four Rings Okedokey's Avatar
    Join Date
    Oct 24 2015
    AZ Member #
    363505
    Location
    Perth, WA

    Quote Originally Posted by Gosser View Post
    They are studs and replaceable. I just did it.

    ECS doesnt seem to sell them separately, but they cant be expensive from the dealer.
    I have some new ones you can have
    A4 B7 2.0T | HPFP upgrade + FMIC | BSR Stage II + exhaust + HFC | RS4 fuel contr., PRV + S3 inj., G247 + DW300c | GFB DV+| 034 RSB + all arms and mounts | S4 brakes | B12 Bilstein suspension + H&R springs | RNS-E + Polk Audio PA D5000.5 - 4 x DB6502 + DB840DVC sub + Pioneer 10" sub | LEDs throughout | 19" Audi 2015 RS4 rims

    My respray thread

  16. #11136
    Veteran Member Four Rings tankdeer's Avatar
    Join Date
    Aug 18 2009
    AZ Member #
    46582
    My Garage
    A Unicorn
    Location
    Portland, OR

    Quote Originally Posted by dalmation53 View Post
    I'm never with my windows down because i hate it and i like the A\C on my face. So if put a test pipe on the ride i shouldn't have problems since i'm never with the widnows down correct?

    Sent from my SM-G925T using Audizine mobile app
    Maybe? It's not going to reek all the time. Sometimes more than others, and again, it depends on how sensitive you are to it
    Negative Ghostrider, the pattern is full

    :: Seller feedback ::

    His: Nothing. Still searching
    Hers: 2008 Ibis Ti Avant 6MT - Bagged Unicorn
    RIP: 2006 DG Avant Tip

  17. #11137
    Veteran Member Four Rings dalmation53's Avatar
    Join Date
    Aug 20 2013
    AZ Member #
    121389
    My Garage
    Audi A4 B7
    Location
    Orlando, FLORIDA

    Quote Originally Posted by tankdeer View Post
    Maybe? It's not going to reek all the time. Sometimes more than others, and again, it depends on how sensitive you are to it
    I think ill be fine. My mother will complain though sometimes we go out in my car haha oh well.

    Sent from my SM-G925T using Audizine mobile app
    Ivan

  18. #11138
    Senior Member Four Rings Okedokey's Avatar
    Join Date
    Oct 24 2015
    AZ Member #
    363505
    Location
    Perth, WA

    Quote Originally Posted by dalmation53 View Post
    I think ill be fine. My mother will complain though sometimes we go out in my car haha oh well.

    Sent from my SM-G925T using Audizine mobile app
    A4 B7 2.0T | HPFP upgrade + FMIC | BSR Stage II + exhaust + HFC | RS4 fuel contr., PRV + S3 inj., G247 + DW300c | GFB DV+| 034 RSB + all arms and mounts | S4 brakes | B12 Bilstein suspension + H&R springs | RNS-E + Polk Audio PA D5000.5 - 4 x DB6502 + DB840DVC sub + Pioneer 10" sub | LEDs throughout | 19" Audi 2015 RS4 rims

    My respray thread

  19. #11139
    Veteran Member Four Rings dalmation53's Avatar
    Join Date
    Aug 20 2013
    AZ Member #
    121389
    My Garage
    Audi A4 B7
    Location
    Orlando, FLORIDA

    Quote Originally Posted by Okedokey View Post
    Whats that suppose to mean?

    Sent from my SM-G925T using Audizine mobile app
    Ivan

  20. #11140
    Established Member Three Rings tloft4's Avatar
    Join Date
    May 15 2016
    AZ Member #
    373349
    Location
    Lock Haven, PA

    Howard walowitz the mamas boy from big bang theory. Probably a joke you know

  21. #11141
    Senior Member Three Rings
    Join Date
    Sep 09 2009
    AZ Member #
    47537
    Location
    Minneapolis

    Questions you thought were too dumb to ask

    Besides smell, there's the sound.

    Test pipe did not sound good imo, swapped it for a hfc.

    This was connected to a europaparts full exhaust.
    Never used it with the stock exhaust.

    Sent from my iPhone using Tapatalk
    Last edited by king_j; 08-14-2017 at 01:18 AM.
    2006 A4 2.0T Q. S-Line 6MT - Arctic White
    JHM stage 1, 034 hfc, Europaparts exhaust.
    Miro 111 18x8.5 et 35, 034 RSB.

  22. #11142
    Established Member Two Rings PeterKarian's Avatar
    Join Date
    Feb 08 2017
    AZ Member #
    392760
    Location
    Latham, NY (Albany Area)

    Quote Originally Posted by wjg22 View Post
    Okay, thanks I'll have to give them a call. I looked briefly on GAP but I didn't see the actual bolts on the diagrams.
    I need the same studs can you please let me know what you find out?? Thanks!!


    Sent from my iPhone using Audizine

  23. #11143
    Established Member Two Rings PeterKarian's Avatar
    Join Date
    Feb 08 2017
    AZ Member #
    392760
    Location
    Latham, NY (Albany Area)

    Hey guys I came across a brand new awe turbo boost gauge ...I wanted to know how to install it. I can't find a thread I don't know if I might not be searching well but can anyone tell me the proper way. I know there is a pos/neg wire for power to the gauge and a vacuum line out but where and how do you install or tap the vacuum line into. Thanks!!


    Sent from my iPhone using Audizine

  24. #11144
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by IvanAceOnA4 View Post
    What do you guys say about Raceland coilovers? Any experience, good, bad?
    Ive heard they ride okay if not slammed down to the ground. If to highest setting they ride

    .
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  25. #11145
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by PeterKarian View Post
    Hey guys I came across a brand new awe turbo boost gauge ...I wanted to know how to install it. I can't find a thread I don't know if I might not be searching well but can anyone tell me the proper way. I know there is a pos/neg wire for power to the gauge and a vacuum line out but where and how do you install or tap the vacuum line into. Thanks!!
    I the vacuum tap @ the rear of the intake manifold. There should be factory stock rubber nipple you can remove and with a t-tap
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  26. #11146
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by PeterKarian View Post
    I need the same studs can you please let me know what you find out?? Thanks!!
    These guys sell it https://www.europaparts.com/turbo-in...4-b7-2-0t.html
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  27. #11147
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by tloft4 View Post
    Howard walowitz the mamas boy from big bang theory. Probably a joke you know
    1............................
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  28. #11148
    Veteran Member Four Rings vce1232000's Avatar
    Join Date
    Jun 17 2013
    AZ Member #
    117368
    My Garage
    83 MK1 GTI Callaway Turbo stg II
    Location
    jersey city nj
    Items for Sale

    Quote Originally Posted by Okedokey View Post
    ................
    APR KO4, APR HPFP,RS4 LPFP Cntr,145 bar PRV, APR TP, TT DP, GFB DV+, AWE FMIC, BFI CC, AWE Exhaust, RS4 Exh tips, ST CO, 034 RSB,034 St Dnsty Mtr Mts, New Sth West Bst guage, B7 RS4 8 pot Calipers.Stop Tech slotted rotors.Goodridge SS brake lines frt & rr. Hawk HPS frt & rr. RS4 PS rack, RS4 Servotronic Relay,RS4 rims. S4 mirror caps,RS4 Mesh Style Grill,LED tail lites
    S4 Recaro Front & Rear seats. Led Interior Kit,United LED's fog lites
    2007 A4 Avant 2.0T Tiptronic 6spd

  29. #11149
    Established Member Three Rings wjg22's Avatar
    Join Date
    Apr 14 2016
    AZ Member #
    371825
    My Garage
    '01 Monster 750
    Location
    Pittsburgh

    Quote Originally Posted by vce1232000 View Post
    Thanks! That confirms that they are the correct size (M10x28) and it appears that ECS does sell them individually. I'm sure other places do too...

    Quote Originally Posted by Okedokey View Post
    I have some new ones you can have
    Idk if you meant this message for me, since I was the one looking. I'd definitely take them, but not if shipping from down under costs as much as buying them from a vendor in the states. Lmk

  30. #11150
    Senior Member Four Rings Okedokey's Avatar
    Join Date
    Oct 24 2015
    AZ Member #
    363505
    Location
    Perth, WA

    Quote Originally Posted by wjg22 View Post
    Thanks! That confirms that they are the correct size (M10x28) and it appears that ECS does sell them individually. I'm sure other places do too...



    Idk if you meant this message for me, since I was the one looking. I'd definitely take them, but not if shipping from down under costs as much as buying them from a vendor in the states. Lmk
    Not sure, you only need 4 right? I'll get quote. Pm me your deets
    A4 B7 2.0T | HPFP upgrade + FMIC | BSR Stage II + exhaust + HFC | RS4 fuel contr., PRV + S3 inj., G247 + DW300c | GFB DV+| 034 RSB + all arms and mounts | S4 brakes | B12 Bilstein suspension + H&R springs | RNS-E + Polk Audio PA D5000.5 - 4 x DB6502 + DB840DVC sub + Pioneer 10" sub | LEDs throughout | 19" Audi 2015 RS4 rims

    My respray thread

  31. #11151
    Senior Member Three Rings
    Join Date
    Sep 09 2009
    AZ Member #
    47537
    Location
    Minneapolis

    Inner front fender paint wear.
    Who has it?

    Mine are worn in spots to the metal, no rust though.

    This normal?
    I'm not slammed and no rubbing on the fender that I know of.


    Sent from my iPhone using Tapatalk
    2006 A4 2.0T Q. S-Line 6MT - Arctic White
    JHM stage 1, 034 hfc, Europaparts exhaust.
    Miro 111 18x8.5 et 35, 034 RSB.

  32. #11152
    Stage 2 Banner Advertiser Four Rings Hugh@EuropaParts's Avatar
    Join Date
    Aug 22 2010
    AZ Member #
    63043
    Location
    Piscataway, NJ

    Anyone remember the size of the maf housing off the top of their heads?
    Hubert
    EuropaParts.com, Your Trusted Audi Parts Source
    Phone: 800.877.7033 x 101
    Email: hubert@europaparts.com
    Facebook: Like Us on Facebook


  33. #11153
    Veteran Member Four Rings Axis's Avatar
    Join Date
    Nov 15 2011
    AZ Member #
    83963
    My Garage
    A4 B6 Avant | A4 B7 Sedan
    Location
    Montreal | I sell in USD
    Items for Sale

    Quote Originally Posted by Hugh@EuropaParts View Post
    Anyone remember the size of the maf housing off the top of their heads?
    Isnt it 3"


    *****I sell in USD*****

    Click here to read my seller feedback

    B6 Avant GTX2863R Motoza Tuned Aka the part hauler

    B7 Sedan Stage II HPFP Aka the retrofitted queen


  34. #11154
    Established Member Three Rings wjg22's Avatar
    Join Date
    Apr 14 2016
    AZ Member #
    371825
    My Garage
    '01 Monster 750
    Location
    Pittsburgh

    Quote Originally Posted by Okedokey View Post
    Not sure, you only need 4 right? I'll get quote. Pm me your deets
    Yeah I only need 4, and associated nuts. PM incoming.

  35. #11155
    Stage 2 Banner Advertiser Four Rings Hugh@EuropaParts's Avatar
    Join Date
    Aug 22 2010
    AZ Member #
    63043
    Location
    Piscataway, NJ

    Quote Originally Posted by Axis View Post
    Isnt it 3"
    That's what I thought too... wasn't 100% sure.
    Hubert
    EuropaParts.com, Your Trusted Audi Parts Source
    Phone: 800.877.7033 x 101
    Email: hubert@europaparts.com
    Facebook: Like Us on Facebook


  36. #11156
    Senior Member Two Rings
    Join Date
    Oct 04 2006
    AZ Member #
    12306
    Location
    MI

    Is it a problem to drive for a short time with one wheel/tire different from the others? Had a blowout last night and put the spare on but won't be able to get a replacement tire until Wednesday. 3 are 19s and the spare is the stock 18".




    Sent from my iPhone using Tapatalk
    08 A4 Avant 3.2 Titanium

  37. #11157
    Senior Member Four Rings Ashtonts's Avatar
    Join Date
    Jan 17 2015
    AZ Member #
    309840
    Location
    CT

    Quote Originally Posted by grizwold View Post
    Is it a problem to drive for a short time with one wheel/tire different from the others? Had a blowout last night and put the spare on but won't be able to get a replacement tire until Wednesday. 3 are 19s and the spare is the stock 18".




    Sent from my iPhone using Tapatalk
    Should be okay for a minimal amount of time. If you do the calculations, I bet the final rolling diameter isn't much different between the 19" and 18" wheels.
    2005.5 A4 2.0T Brilliant Red | 6MT | Quattro | DTM
    Go: K04 | ST Coilovers | Carbonio | Maestro | S3 Injectors | IE Rods | JHM FMIC | Autotech HPFP | ECS SS | JHM Clutch | USP HFC | Quad-tip Exhaust | S4 Brakes
    Show: Panda Recaros | RS4 Grille | Votex Spoiler | OEM CF Trim | S4 Mirrors | Black Ext. Trim | Bixenons | LED Tails | A8 Rings | RNSe | 20% Tint | BFI Shift Knob | 034 Adj. UCAs | Ziza LEDs

  38. #11158
    Senior Member Three Rings klrider44's Avatar
    Join Date
    Aug 20 2014
    AZ Member #
    276508
    Location
    Doylestown PA

    So I replaced all the seals on my injectors. Do I need the injector tool kit to install the injectors into the head? The teflon seal that I replaced seem a bit loose on there, I did them by hand. Do I have a problem here?


    Sent from my iPhone using Audizine

  39. #11159
    Senior Member Two Rings
    Join Date
    Sep 11 2009
    AZ Member #
    47628
    My Garage
    A4 B7 2.0T MT, A4 B5 1.8 MT
    Location
    South Africa

    Quote Originally Posted by klrider44 View Post
    So I replaced all the seals on my injectors. Do I need the injector tool kit to install the injectors into the head? The teflon seal that I replaced seem a bit loose on there, I did them by hand. Do I have a problem here?


    Sent from my iPhone using Audizine

    Yes, you do. Read fly300kts thread here:

    http://www.audizine.com/forum/showth...eaning-The-DIY

    Especially the part about installing the new teflon seals:


    "The Teflon ring needs to be crimped back to his original diameter, inside the injector groove. Slide calibration sleeve #1 onto the injector as far as the stop by pressing lightly and turning back and force 180 degrees. Remove sleeve # 1 and repeat same process with sleeve #2."

  40. #11160
    Established Member Two Rings lilfugee's Avatar
    Join Date
    Apr 25 2015
    AZ Member #
    329413
    Location
    Colorado

    So I was looking at maxton side skirts and ECS has the gloss black ones listed for only S-Line. What is the difference between non s-line and s-line side skirts, other than doorblade (which shouldn't have an effect on the maxton side skirts)?
    2007 Audi A4 2.0T Ibis White || APR Stage II, GFB DV+, ECS Tuning Kohlefaser Luft-Technik Intake, Autotech HPFP upgrade kit, ATP catless upper downpipe connected to AWE cat-back with dual black diamond tips, United Motorsports Catch Can, Airlift Performance V2, 034 Motorsports 25.4mm rear sway bar. || STRMTRPR
    Build Page: http://www.audizine.com/forum/showth...oject-STRMTRPR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2017 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.