Hartmann Twist wheels

[rwc0920]

hey,


Did hartmann start making the turbo wheels again? I was looking on their site and under #4 on the porsche section -- they seem to look like the hollow twist wheels.



http://hartmannwheels.com/porsche-wheels

[happy2B5]

Noticed the same. Only staggered sets though

[Skyler@Achtuning]

Noticed the same. Only staggered sets though

The 18x8.0" ET50's are available in a set of 4, it's just the 18x10's that need to be sold as a staggered set with the 8.0s. ( we have more 8.0" wheels than 10.0" wheels) With a set of 5x130-5x112 adapters these will fit most Audi applications.

[happy2B5]

Ahhh. Thank you for the clarification and do you know how much spacing is needed to clear st40 bbk? 332 discs. Thanks again

[Skyler@Achtuning]

do you know how much spacing is needed to clear st40 bbk? 332 discs. Thanks again

With a 15mm 5x130-5x112 adapter it looks like they just clear the brake template (about 2mm clearance between the spoke and caliper face). This is about the minimum that I would be comfortable with. StopTech's templates are the best in the industry but there may still be a slim possibility that a slightly thicker adapter may be needed.

[happy2B5]

With a 15mm 5x130-5x112 adapter it looks like they just clear the brake template (about 2mm clearance between the spoke and caliper face). This is about the minimum that I would be comfortable with. StopTech's templates are the best in the industry but there may still be a slim possibility that a slightly thicker adapter may be needed.

:thumbup: thanks for quick verification and response.

[warpig]

Anyone know if they sell just the rears?

[happy2B5]

I gather no from Skylers response. Need to be bought staggered with front 8's but 8's can be bought as a full set of 4.

[Skyler@Achtuning]

currently the only way to get 4 rears is with the purchase of 4 fronts as well