
-
Active Member
Three Rings
Side skirt opinons
Going with the rs4 bumper because stock will not fit with the FMIC, obviously since I have to get the rs4 bumper I need side skirts or else the car will look like it has a crimson chin. S4 side skirts have to much work involved and are costly. I need something low enough that it will flow with the front bumper but not to low that I need a rear bumper. I plan on painting the bottom of the stock rear bumper body color.
I found these two,
http://www.magicdrift.com/images/pAu...Audi_A4_01.jpg
and
http://www.carbodykitstore.com/audi-...th=450_463_777
If you have or know anyone with experiance with these sideskirts let me know about them.
Or if you recommend something different.
-
Veteran Member
Four Rings
many fmic's fit behind the S4 bumper.
2001 Santorin A4 1.8tQTip Avant 29-35mpg
034 GT28rs, 034 exhaust manifold, Unitronics, Borla non-res v1, Vis CF, 35%/5% tint, Blitz, 6500k HID, Carbonio v2, 18x8 Rs6, AWE Vent, A8 bbk, Valeo Ecodes, S4 front, Forge 007, Racetec, 550cc, 034 hfc, KW V1. et17r/22f
2004 Silver S4 6sp. 18-22mpg. H&R sport, Hotchkis, Milltek non-Res.
TEAM|AXION 
Check out my photography @ www.TeamAxion.smugmug.com
-
Active Member
Three Rings
I would love the S4 bumper, problem is finding one.
-
Senior Member
Four Rings
The RS4 bumper is not OEM I assume? More rare and expensive than an S4 bumper.
-
Veteran Member
Four Rings
I always like the Avante Garde side skirts. Look up user name bassed, and you will see basically exactly what you want. Think his front bumper was a Reiger RS4 and the side skirts were def Avante Garde reps made in polyurethane.
I hate it when my car acts like a little bitch, treating me like the bitch 
-
Senior Member
Four Rings
You can find S4 bumpers, I bought mine with matching color for $200. Fog lights and bar.
ATW 1.8TQM | SCAT | FX400 | GTcougaR | Meth
For sale: RAI FMIC & misc '00 parts
STEVE
-
Active Member
Three Rings
Yes not a oem rs4 bumper, a rep. Avante garde are not sold anymore but I will look for reps. Viceprp that's a steal you got there!
-
Active Member
Three Rings
-
Senior Member
Four Rings
What brand rep? The TM Tuning rep looks the best by far.
-
Active Member
Three Rings
Either TM Tuning or a nice one from a private seller that's urethane. Depending on how much shipping is for TM.
-
Active Member
Three Rings
Thinking about this because people have commented back saying its a perfect fit.
http://www.ebay.com/itm/1996-2001-Au...73ed9a&vxp=mtr
http://www.ebay.com/itm/130636196786...84.m1423.l2648
Either of those, which one should I get?
-
Senior Member
Four Rings
They look like Reiger kits, which aren't bad either. Both of those look the same to me so which ever costs less if they are both urethane.
-
Active Member
Three Rings
Yeah true, only reason I'm not going with the TM tuning one is I just know to ship it to the US will be costly.
-
Forum Moderator
Four Rings
FWIW, S4 skirts are not complicated at all to install. All you need is the skirt and the rear s4 bracket.
BetaAlphaTau Member #12 01' A4 1.8TQMS 5spd swapped GT2871R|CTAPP MAFless|034 EM|Godspeed FMIC|APR 2.5"|EVO MS DV|CM FX400-LWFW
18" RS4 Reps.|S4 Front/Skirts/Seats/Brakes|RS4 Grill|CF Trim
Stasis SS|LLTEK Tower|KW F/R Sways|Profec Spec 2
My 5-Speed Swap DIY
- B6 USP
Chris:Mod|PM me with any questions
-
Veteran Member
Three Rings
The KBD urethane rs4 bumper for $269 looks worth a try for me.. and their located only 20min from me in Brea Ca..so i'll save $120 by picking up myself..this be good.
'99 A4 1.8QM CompTurbo 4952**.. PSi Mani* + ER dp*.. Tial WG**.. Siemens 630cc**.. Aeromotive 340 fpumper.. 034 ICM delete.. V8 MAF**.. ER Comp FMIC**.. 3" Custom Exh./Magnaflow*.. CM FX400.. 18" OZ Ultra's/ Michelin SS/BFG R1's*/studs .. Bilstein 9's.. Stoptech 332mm /Carbotech.. NS r.sway.. 034 MS adjustable r. swaybar end links**.. JHM anodized race pedals* JHM Trio ss.. Motul n Total Quartz fluids..
BT build will have to be for another time..
* = new,uninstalled and FS
** =SOLD!
-
Active Member
Three Rings
 Originally Posted by johnnybravo!
The KBD urethane rs4 bumper for $269 looks worth a try for me.. and their located only 20min from me in Brea Ca..so i'll save $120 by picking up myself..this be good.
Pick one up today and let me know! 
The only thing that turned me away from doing S4 skirts is this thread
http://www.audiworld.com/tech/ext47.shtml
Too much work involved in my opinion.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks