Ill try my best to describe my questionning but on the bumper shocks, the space that but the bumper bolt in to lock the bumper in place, does it have bolt thread or its a flat hole with no thread ?"
Results 1 to 6 of 6
Thread: bumper shock
-
06-10-2012 07:23 AM #1Senior Member Three Rings
- Join Date
- Sep 18 2009
- AZ Member #
- 47940
- Location
- Montreal
-
06-10-2012 09:07 AM #2Senior Member Four Rings
- Join Date
- Dec 11 2010
- AZ Member #
- 68153
- My Garage
- 1999.5 2.8
- Location
- Where I end and you begin.
I don't think it's threaded. Pretty sure the bolt slides right through and threads into the metal bumper support/bracket.It's called the Audi "Piece of Paper". Or is it the Audi "Road through Slough?" Anyway, it's the A4! - Jeremy Clarkson
-
06-10-2012 09:33 AM #3Registered User Four Rings
- Join Date
- Feb 08 2011
- AZ Member #
- 70665
- My Garage
- B5 A4 2 liter GT35r and trailer
- Location
- Phoenix, Arizona area
The nut for that bolt is located on the top side of the bumper support bracket. So the bolt slides thru the bottom of the bumper bracket, thru the bumper shock and then into the nut on the top.
You can see the nut bracket in this picture.
-
06-10-2012 10:10 AM #4Senior Member Three Rings
- Join Date
- Sep 18 2009
- AZ Member #
- 47940
- Location
- Montreal
E The nuts in the renfort bracket are loose...im trying to find a way to bolt the bumper solidely in place...Audi A4 2001 1.8 TQM
Custom Flash 22 psi, forge splitter valve, n75 race, Ra4 clutch kit + lightweight flywheel, H-sport sway bars f+r , Billstein + h&r.
Custom Catback with magnaflow muffler.
-
06-11-2012 07:53 AM #5Registered User Four Rings
- Join Date
- Feb 08 2011
- AZ Member #
- 70665
- My Garage
- B5 A4 2 liter GT35r and trailer
- Location
- Phoenix, Arizona area
Well they are loose to allow some movement when as you install it, but once you have the bolt tight the nut bracket will be locked in place.
Originally Posted by fbdohc
-
06-11-2012 08:11 AM #6Senior Member Three Rings
- Join Date
- Sep 18 2009
- AZ Member #
- 47940
- Location
- Montreal
ohh ... ok i see. so i just need to align the nuts correctly ...Audi A4 2001 1.8 TQM
Custom Flash 22 psi, forge splitter valve, n75 race, Ra4 clutch kit + lightweight flywheel, H-sport sway bars f+r , Billstein + h&r.
Custom Catback with magnaflow muffler.
Reply With Quote
Posting Permissions
|
|
||||
|
© 2001-2013 Audizine, Audizine.com, and Driverzines.com
Audizine is an independently owned and operated automotive enthusiast community and news website. Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG. |
 |
|||
Bookmarks