Thank you Ken @ 034

[nthusiastt]

Big ups for the rear upper control arms. They work splendedly...

As a note you can adjust the bottom bolt to simulate positive camber then adjust the 034 upper control arms all the way in (because they have so much adjustment) and bring a wider tire further into the fender. So to those of you eaking for just an extra 1/2" these are your babies! Still need to get it aligned to remove any toe since I'm probably around -3 degrees but anyways... On to pictures...

Before:
I didn't get very good pictures before unfortunately... :(


During:


After:

[topquarkpc]

What Im wondering is What's going on with the paint...???

[nthusiastt]

Its being repainted

[Anthony]

If there's anyone itchin' for a few extra centimeters of wheel clearance to play with, it's you and Ken.

[topquarkpc]

But why...??? It was so nice...
Looking forward to seeing it finished...again...lol
What color...??? Same...??? Similar...??? Different...???

[S4 00 2.7]

Yea, what was wrong with the paint?

[Max@034]

Holy negative camber batman!

Looks good though. And that is despite my love of wheel gap and high ride height.

[A62TURBO]

That car is tits!!!

[nthusiastt]

The metallic didn't lay up perfectly flat so from some angles there was a bit of "modeling" I guess is what they call it. Basically it's darker in some spots and lighter in others. Also some of the body lines had disappeared so this round a new shop is sharpening everything up and respraying everything. Not doing a color change btw.

[topquarkpc]

who's doing the work...???
i need a good recommendation for my front bumper respray along with rs4 front... hoping to get the fenders & hood blended as well on some package deal...
wondering if the shop you're using is willing...
LMK TIA.

[DeleriousZ]

Adjsutable RUCA's hey? Hmmm, those look great!!

[exogen]

perfecting perfection haha. Looks amazing I love watching your video speedworks did.

[foxhound720]

Nice car. I love adjustable things.

[nthusiastt]

who's doing the work...???
i need a good recommendation for my front bumper respray along with rs4 front... hoping to get the fenders & hood blended as well on some package deal...
wondering if the shop you're using is willing...
LMK TIA.

Benchmark Auto Salon is doing all the work. He's been awesome through the whole process (he's just getting his shop opened up, and he's been slammed)

Adjsutable RUCA's hey? Hmmm, those look great!!

werd

Holy negative camber batman!

Looks good though. And that is despite my love of wheel gap and high ride height.

lol, yeah I'm not so certain on this look yet. I'll need to see it rolling before I pass final judgement.

That car is tits!!!

tatas!

perfecting perfection haha. Looks amazing I love watching your video speedworks did.

Thanks man! Deffinetly still needs a bit of buttering up (and obviously engine work ) but it's a decent looking little cruiser.

[8520]

So these are just to dial in more negative camber? Aren't eccentric bolts good for about 3degrees?

[nthusiastt]

So these are just to dial in more negative camber? Aren't eccentric bolts good for about 3degrees?

I'm not sure but the benefit of these is say you get eccentric bolts as well as the 034 uppers you can tuck a larger wheel and tire in further because it brings the whole upright/nuckle assembly further in. Essentially you have the ability to give push the wheel further into the fender without adding camber because you can adjust from the bottom and the top.

[zdriver]

Makes a big difference, thank you for the photos

[8520]

I'm not sure but the benefit of these is say you get eccentric bolts as well as the 034 uppers you can tuck a larger wheel and tire in further because it brings the whole upright/nuckle assembly further in. Essentially you have the ability to give push the wheel further into the fender without adding camber because you can adjust from the bottom and the top.

That makes sense. Thanks for the clarification.

How wide you runnning? 11's in the rear?

[nthusiastt]

That makes sense. Thanks for the clarification.

How wide you runnning? 11's in the rear?

11" with over an inch to spare off the upright

[topquarkpc]

....

[DeleriousZ]

You know what that means right? time for some 12.5's

[KEN@034]

Awesome! glad it gave you the camber you need to get that fitment perfect! If anyone needs a set please PM me.

[DeleriousZ]

PM you for super duper turbo wheely deely AZ pricing, or pm you to just get a set? ;) lol.

[KEN@034]

PM you for super duper turbo wheely deely AZ pricing, or pm you to just get a set? ;) lol.

PM me to find out

[S4 00 2.7]

You know what that means right? time for some 12.5's

Yes!

[nthusiastt]

^ I'd love to do 12's or 12.5's... Maybe the next set I'll buy 18x12's and drop it a bit lower as well..

Here's some better pictures:

Before install:




After install:



other angles to show camber:

[Gumby]

Looks so bad ass. I really need a set of these for my allroad... Too bad they don't make any for c5's.
*cough* 034 *cough*

Anyways... What size tires are you running now?

[nthusiastt]

Thanks man! 265/30's now off 11's rather than the old 275/30's off of 10.5's.... Honestly I was expecting everyone to flame me lol.

[madone_si]

Sick car Ben.