Looking to get a set of 18x8" Enkei EKM3's with 30 offset and 235/40R 18 tires from a guy in town.
Will these fit onto my 2000 Audi A6 2.8l?
I checked the offset calculator and it said
Inner Clearance: 2MM More
Outer Clearance: EXTEND an extra 28mm
Wheels confuse me lol any help is appreciated.
Results 1 to 8 of 8
Thread: Will these wheels fit?
-
03-28-2012 12:14 AM #1Active Member Two Rings
- Join Date
- Aug 03 2011
- AZ Member #
- 79225
- Location
- Windsor
-
03-28-2012 01:18 AM #2Senior Member Three Rings
- Join Date
- Mar 28 2011
- AZ Member #
- 73034
- My Garage
- 2006 Audi S4, 2013 Mercedes C250, 2000 Jeep Grand Cherokee Laredo, 2008 Jeep Grand Cherokee Laredo
- Location
- Los Angeles
correct me if im wrong, but i believe all audi bolt pattern is 5X112 so as long as the bolt pattern is 5x112 it will fit, i had a B5S4 (very similar to C5A6) which i was able to fit 19x8 LM's and my B7S4 which come with the stock CH028 18X8" , now the C5A6 is a bigger sedan so i believe you should be able to fit 20x9" wheels, i don't think you would have a problem with 18x8, just make sure the bolt pattern is correct! hope i helped=]
-
03-28-2012 03:35 AM #3Veteran Member Four Rings
- Join Date
- Feb 08 2005
- AZ Member #
- 5184
- My Garage
- C5 A6 Avant, VW Golf TDI
- Location
- Ontario, Canada
best will be to test fit them if they will clear the suspension et30 might be too close and might rubCluster Repair Solutions: www.pixelfix.info
Difference in Audi B5 A4 Clusters Click Here
Difference in Audi C5 A6 Clusters Click Here
Replace ABS module in A6 Click Here
DIY-Rear-Differential-Seal-replacement in A6 Click Here
-
03-28-2012 05:10 AM #4Senior Member Three Rings
- Join Date
- Apr 21 2009
- AZ Member #
- 41524
- My Garage
- 1967 Mercury Cougar, 1987 Honda CBR600
- Location
- Clearwater, FL
Stock wheels on my 4.2 are 17x8 et35. From what I can see the offset shouldn't be a problem, at least not one spacers can fix. The other things to know are the bolt pattern, is it 5x112? and the hub bore, I believe our cars have a 57.1mm bore.
Like audifirst said, best bet is to test fit at least one wheel, with the wheel on the car check for any excessive movement, and make sure the wheel sits flush with rotor.redneck truck - Everybody quieted down when the guy up in the back of the theater asked his date for a Come flavored slurpee.
-
03-28-2012 05:19 AM #5Active Member Two Rings
- Join Date
- Sep 23 2009
- AZ Member #
- 48249
- Location
- Douglassville,PA
My summer set its 18x8 and I have the same size tires and mine fit fine. Im also as stock ride height still. Hope that helps
Originally Posted by KrV
99' A6 2.8Q Tip
-
03-28-2012 04:58 PM #6Senior Member Four Rings
- Join Date
- May 17 2010
- AZ Member #
- 59107
- Location
- Colorado
They should fit.. We've run my 18x8et32 fliks w 235/40/18s on a 2000 a6 and a 2003 a6 with no problems. The 2000 is on H&R race is sits really low.
-
03-28-2012 06:30 PM #7Senior Member Four Rings
- Join Date
- Jan 31 2010
- AZ Member #
- 54269
- My Garage
- S-Line A6
- Location
- East Haven, CT
I ran 18x8 et30's with 235/40/18's for a season just fine. You'll have no problems.04 2.7T S-Line A6 6MT
(Build Thread) <-Click
(Featured Article) <-Click
My Photo Gallery - MyPhotoStash.com <-Click
Originally Posted by 8520
You're in high school, and chipping a 2.7t is like poking the bear with a tazer.
-
03-29-2012 02:17 PM #8Veteran Member Three Rings
- Join Date
- Dec 31 2006
- AZ Member #
- 14527
- Location
- Fort Collins
Its a 2004 thank you! lol Originally Posted by mikehawk666
Reply With Quote
Posting Permissions
|
|
||||
|
© 2001-2013 Audizine, Audizine.com, and Driverzines.com
Audizine is an independently owned and operated automotive enthusiast community and news website. Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG. |
 |
|||
Bookmarks