Results 1 to 35 of 35
  1. #1
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Alignment in Chicago Area?

    Guest-only advertisement. Register or Log In now!
    Looking for a good place out near warrenville/naperville. I hear Firestone does a lifetime alignment which would mean that adjusting my coilovers and going back in would be covered. Sounds good to me.

    Any advice?

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  2. #2
    Veteran Member Three Rings BzeB5A4's Avatar
    Join Date
    Jul 21 2005
    AZ Member #
    7327
    Location
    Illinois

    Quote Originally Posted by CorneliusRox View Post
    Looking for a good place out near warrenville/naperville. I hear Firestone does a lifetime alignment which would mean that adjusting my coilovers and going back in would be covered. Sounds good to me.

    Any advice?
    Any one? I'd like to know too, for when I go low!
    '98 A4 1.8TQM ~ RIP ~
    '99.5 A4 1.8TQM ~WIP~

  3. #3
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by BzeB5A4 View Post
    Any one? I'd like to know too, for when I go low!
    Right? lol I cant believe nobody has an opinion. I am putting my coilovers on tomorrow.

    Well, I will update this with what I find.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  4. #4
    Senior Member Four Rings NeedingAnAudi's Avatar
    Join Date
    Mar 16 2009
    AZ Member #
    39975
    My Garage
    99.5 A4 1.8TQM
    Location
    Lombard, IL

    Quote Originally Posted by CorneliusRox View Post
    Right? lol I cant believe nobody has an opinion. I am putting my coilovers on tomorrow.

    Well, I will update this with what I find.
    Please do. I need to find a shop that will align my car at 22.5 gtf
    Brilliant Black B5 ..... 25k on Street Built Engine
    Strictly Pleasure/Zero Clearance/Stretch Your Legs IX
    Alex

  5. #5
    Veteran Member Three Rings BzeB5A4's Avatar
    Join Date
    Jul 21 2005
    AZ Member #
    7327
    Location
    Illinois

    Quote Originally Posted by NeedingAnAudi View Post
    Please do. I need to find a shop that will align my car at 22.5 gtf
    Mann..thats crazy low! Not gunna go that low myself. But on another note, You guys have/getting a skid plate? I think I'd like one for peace of mind, but dont want to spend like $250 for a Panzer or Evo Thor plate.
    '98 A4 1.8TQM ~ RIP ~
    '99.5 A4 1.8TQM ~WIP~

  6. #6
    Senior Member Three Rings SAUDI01.5's Avatar
    Join Date
    Oct 07 2010
    AZ Member #
    65402
    My Garage
    01' Sliver S4
    Location
    Chicago, IL

    I got mine done at GRD and they did a good job.
    WTB:
    2003-04 RS6 wheels (9-spoke 18x8.5)
    APR BiPipe (unmolested)

  7. #7
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    GRD?


    and 22.5?! I am going to go 25. I am interested in the skid plate though.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  8. #8
    Active Member Two Rings Durkka's Avatar
    Join Date
    Feb 06 2012
    AZ Member #
    87764
    My Garage
    Predator 500
    Location
    Barrington Hills, IL

    GRD - Genesis Racing Development
    http://grdtuned.com/

    I haven't used them myself but have been looking into them

  9. #9
    Senior Member Three Rings SAUDI01.5's Avatar
    Join Date
    Oct 07 2010
    AZ Member #
    65402
    My Garage
    01' Sliver S4
    Location
    Chicago, IL

    www.grdperformance.com/
    Genesis Racing & Development
    875 N. Ellsworth Ave.
    Villa Park, IL 60181

    Heard really good things about this place too but pricey.
    www.gocpt.com
    Chicago Performance & tuning
    5109 west lake st. unit B
    melrose park, IL 60160
    (708)343-8677

    I actually just did a review on my Panzer (skid) plate. http://www.audizine.com/forum/showth...r-(Skid)-Plate
    WTB:
    2003-04 RS6 wheels (9-spoke 18x8.5)
    APR BiPipe (unmolested)

  10. #10
    Veteran Member Four Rings JDM EJ1 95's Avatar
    Join Date
    Feb 28 2007
    AZ Member #
    16005
    My Garage
    01 Nogaro S4 Stage 3
    Location
    chicagoland

    Quote Originally Posted by NeedingAnAudi View Post
    Please do. I need to find a shop that will align my car at 22.5 gtf
    try my good pal Rob at just tires in arlington heights on rand... he aligns everything i bring there.

    or Thalmans alignment in northbrook Illinois.. they have an in ground Flush mounted rack. they can do anything.
    Nogaro 01 s43.0L GT28rsexhausted of it.. parted out

    24v 2.9L BDF on the way

  11. #11
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by SAUDI01.5 View Post
    Heard really good things about this place too but pricey.
    www.gocpt.com
    Chicago Performance & tuning
    5109 west lake st. unit B
    melrose park, IL 60160
    (708)343-8677
    Almost went there for my tune. It is right next to one of our buildings (work) and so I checked them out. They look pretty legit to me. I will probably go get dynoed there sooner or later.

    I am basically just looking for a place that offers a 'lifetime alignment' that does a digital readout of camber, caster, and tow. And is cheap with good results.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  12. #12
    Senior Member Four Rings NeedingAnAudi's Avatar
    Join Date
    Mar 16 2009
    AZ Member #
    39975
    My Garage
    99.5 A4 1.8TQM
    Location
    Lombard, IL

    Quote Originally Posted by JDM EJ1 95 View Post
    try my good pal Rob at just tires in arlington heights on rand... he aligns everything i bring there.

    or Thalmans alignment in northbrook Illinois.. they have an in ground Flush mounted rack. they can do anything.
    I'll definitely keep these in mind.

    I had GRD do my alignment once, but their road has a super nasty bump where one slab of concrete sank like 4 inches, so I dislike going to them lol. Also I think they raised my car when they did my alignment.
    Brilliant Black B5 ..... 25k on Street Built Engine
    Strictly Pleasure/Zero Clearance/Stretch Your Legs IX
    Alex

  13. #13
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by NeedingAnAudi View Post
    I had GRD do my alignment once, but their road has a super nasty bump where one slab of concrete sank like 4 inches, so I dislike going to them lol. Also I think they raised my car when they did my alignment.

    Doesnt that drive you crazy!
    Works on a straight axle though. just put pressure on the axle

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  14. #14
    Senior Member Three Rings SAUDI01.5's Avatar
    Join Date
    Oct 07 2010
    AZ Member #
    65402
    My Garage
    01' Sliver S4
    Location
    Chicago, IL

    Quote Originally Posted by CorneliusRox View Post
    Almost went there for my tune. It is right next to one of our buildings (work) and so I checked them out. They look pretty legit to me. I will probably go get dynoed there sooner or later.

    I am basically just looking for a place that offers a 'lifetime alignment' that does a digital readout of camber, caster, and tow. And is cheap with good results.
    Might have a little trouble finding that type of offer at a performance shop...If you do please let us know.

    I don't know about your car but on my B5 S4 you can't adjust camber on stock control arms...Adjustable control arms are a must if you go real low.
    WTB:
    2003-04 RS6 wheels (9-spoke 18x8.5)
    APR BiPipe (unmolested)

  15. #15
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by SAUDI01.5 View Post
    Might have a little trouble finding that type of offer at a performance shop...If you do please let us know.

    I don't know about your car but on my B5 S4 you can't adjust camber on stock control arms...Adjustable control arms are a must if you go real low.
    That is how B6 and B7's are as well. The rears are adjustable. But with 25"ftg I should be good. Just Barely have neg camber on the front.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  16. #16
    Veteran Member Three Rings BzeB5A4's Avatar
    Join Date
    Jul 21 2005
    AZ Member #
    7327
    Location
    Illinois

    Everyone's talking bout GRD, maybe I should give them a holler since I like like 2 mins driving from them.

    I've checked out the Thor vs. Panzer and everyone goes with Thor cause is Thicker. And right now Boras Part has them on sale with Free Shipping! But it ends today i think :(
    '98 A4 1.8TQM ~ RIP ~
    '99.5 A4 1.8TQM ~WIP~

  17. #17
    Senior Member Three Rings SAUDI01.5's Avatar
    Join Date
    Oct 07 2010
    AZ Member #
    65402
    My Garage
    01' Sliver S4
    Location
    Chicago, IL

    Quote Originally Posted by CorneliusRox View Post
    That is how B6 and B7's are as well. The rears are adjustable. But with 25"ftg I should be good. Just Barely have neg camber on the front.
    I have Bilstein struts/Eibach sport springs...The camber was still within spec. The true test is always tire wear and I have no issue there either.
    WTB:
    2003-04 RS6 wheels (9-spoke 18x8.5)
    APR BiPipe (unmolested)

  18. #18
    Senior Member Four Rings NeedingAnAudi's Avatar
    Join Date
    Mar 16 2009
    AZ Member #
    39975
    My Garage
    99.5 A4 1.8TQM
    Location
    Lombard, IL

    Quote Originally Posted by BzeB5A4 View Post
    Everyone's talking bout GRD, maybe I should give them a holler since I like like 2 mins driving from them.

    I've checked out the Thor vs. Panzer and everyone goes with Thor cause is Thicker. And right now Boras Part has them on sale with Free Shipping! But it ends today i think :(
    I went panzer. I liked the fact that it is one piece across the whole bottom of the car
    Brilliant Black B5 ..... 25k on Street Built Engine
    Strictly Pleasure/Zero Clearance/Stretch Your Legs IX
    Alex

  19. #19
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by SAUDI01.5 View Post
    I have Bilstein struts/Eibach sport springs...The camber was still within spec. The true test is always tire wear and I have no issue there either.
    Yeah lots of guys all the way to 24" ftg are good as long as your tow is proper. They get 20k out of the tires still.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  20. #20
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    So I guess the firestone in ElmHurst honors the lifetime alignment. That is way too far for me though... I might just stick around here.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  21. #21
    Senior Member Four Rings NeedingAnAudi's Avatar
    Join Date
    Mar 16 2009
    AZ Member #
    39975
    My Garage
    99.5 A4 1.8TQM
    Location
    Lombard, IL

    Quote Originally Posted by CorneliusRox View Post
    So I guess the firestone in ElmHurst honors the lifetime alignment. That is way too far for me though... I might just stick around here.
    You live close to Elmhurst? I'm 2 towns over from Elmhurst, takes me 10 minutes to get downtown
    Brilliant Black B5 ..... 25k on Street Built Engine
    Strictly Pleasure/Zero Clearance/Stretch Your Legs IX
    Alex

  22. #22
    Senior Member Two Rings fcjasontt's Avatar
    Join Date
    Jan 26 2010
    AZ Member #
    53960
    Location
    Aurora, IL/ McHenry, IL

    We sublette all our alignments to Just Tires in Plainfield. We have brought them much that is low and have never had a problem.
    J'S REPAIR AND PERFORMANCE
    PLAINFIELD,IL 815.556.0027
    VAG-COM EQUIPPED

  23. #23
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    I just got my alignment done. Went to Firestone or Lisle, IL.

    Lifetime alignment! That means I can adjust my coilovers, get upper control arms, do whatever, and they will align it again. For free. For the life of the car.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  24. #24
    Veteran Member Three Rings BzeB5A4's Avatar
    Join Date
    Jul 21 2005
    AZ Member #
    7327
    Location
    Illinois

    Quote Originally Posted by CorneliusRox View Post
    I just got my alignment done. Went to Firestone or Lisle, IL.

    Lifetime alignment! That means I can adjust my coilovers, get upper control arms, do whatever, and they will align it again. For free. For the life of the car.
    Awesome! How long did you go? Also, how much $, if you don't mind sharing?
    '98 A4 1.8TQM ~ RIP ~
    '99.5 A4 1.8TQM ~WIP~

  25. #25
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by BzeB5A4 View Post
    Awesome! How long did you go? Also, how much $, if you don't mind sharing?
    How long did it take or how low did I go?
    1.25hours and 25ftg

    I cant remember what he said for price originally, I think it was like $160, but I'll let you know when I pick it up after tax and all.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  26. #26
    Senior Member Four Rings NeedingAnAudi's Avatar
    Join Date
    Mar 16 2009
    AZ Member #
    39975
    My Garage
    99.5 A4 1.8TQM
    Location
    Lombard, IL

    Quote Originally Posted by CorneliusRox View Post
    How long did it take or how low did I go?
    1.25hours and 25ftg

    I cant remember what he said for price originally, I think it was like $160, but I'll let you know when I pick it up after tax and all.
    160 for life? That's a steal
    Brilliant Black B5 ..... 25k on Street Built Engine
    Strictly Pleasure/Zero Clearance/Stretch Your Legs IX
    Alex

  27. #27
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Yeah so it was $170 out the door. He said limit is once per day. lol

    they did a great job too! I just got 30mpg city driving into work... I must have been decently off before.

    Also, now my front camber is at about -1.4deg, is that tire eating territory?

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  28. #28
    Veteran Member Four Rings Sanjman's Avatar
    Join Date
    Nov 16 2006
    AZ Member #
    13439
    My Garage
    nothing else special
    Location
    Skokie, IL

    They always treat you nice the first day. Everytime other time I've called in, Firestone says "Oh yeah come right in" and when you go in they give you an estimate of 8 hours to get it done because they have "prior" customers waiting. Be sure to complain a little and let them know that you want it done in a timely matter. Set up an appointment so it is done and you are not waiting 8 hours for a freakin alignment. That was my biggest issue. Last time I took it in, they "didn't get to it" and I was left with a car that wasn't properly aligned riding on tires from them with the extended warranty. Then they told me I better get it aligned or it will "void" my warranty. Epic fail.

    Sorry just ranting. But still a good deal if you do it at least 3-4 times.

  29. #29
    Senior Member Four Rings Ynnekdude's Avatar
    Join Date
    Dec 10 2008
    AZ Member #
    36220
    Location
    Chicago

    Quote Originally Posted by CorneliusRox View Post
    Almost went there for my tune. It is right next to one of our buildings (work) and so I checked them out. They look pretty legit to me. I will probably go get dynoed there sooner or later.

    I am basically just looking for a place that offers a 'lifetime alignment' that does a digital readout of camber, caster, and tow. And is cheap with good results.
    CPT is where it's at. Might be a bit pricey for an alignment so I understand you seizing the great deal in Lisle but if you're ever looking to have major work done, CPT is the place to go. I had CPT do my supercharger pulley install, send my ECU out for tune a tune twice, and fabricate a custom intake for me.


    Their work is top-notch. Going to have them do my coilovers in May.
    2011 Q5 3.2 Prestige. Meteor Gray.
    2009 A6 3.0T Sedan w/19" Sport Pkg. Phantom Black.
    APR 93 Stage II+. STaSIS Exhaust. Custom Intake. Stoptech ST-60 355mm. H&R Rear Sway
    V1 Hardwired. LI-Dual. 18" VMR 708s w/Michelin Pilot Alpin PA3s (Winter)


  30. #30
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    Quote Originally Posted by Sanjman View Post
    They always treat you nice the first day. Everytime other time I've called in, Firestone says "Oh yeah come right in" and when you go in they give you an estimate of 8 hours to get it done because they have "prior" customers waiting. Be sure to complain a little and let them know that you want it done in a timely matter. Set up an appointment so it is done and you are not waiting 8 hours for a freakin alignment. That was my biggest issue. Last time I took it in, they "didn't get to it" and I was left with a car that wasn't properly aligned riding on tires from them with the extended warranty. Then they told me I better get it aligned or it will "void" my warranty. Epic fail.

    Sorry just ranting. But still a good deal if you do it at least 3-4 times.
    Thanks for the advice. I could definitely see that. The price was definitely right though. I will just toss the idea at him of me buying some tires and I am sure he will keep treating me nice for at least a little while.

    Quote Originally Posted by Ynnekdude View Post
    CPT is where it's at. Might be a bit pricey for an alignment so I understand you seizing the great deal in Lisle but if you're ever looking to have major work done, CPT is the place to go. I had CPT do my supercharger pulley install, send my ECU out for tune a tune twice, and fabricate a custom intake for me.


    Their work is top-notch. Going to have them do my coilovers in May.
    Looks awesome. Yeah, every time I have talked with them they always know their stuff. I am waiting for an excuse to go do something with them.



    BTW, here is a nice little thread I made/found. It's good to know:
    http://www.audizine.com/forum/showth...Alignment-info

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  31. #31
    Veteran Member Four Rings Sanjman's Avatar
    Join Date
    Nov 16 2006
    AZ Member #
    13439
    My Garage
    nothing else special
    Location
    Skokie, IL

    My Firestone guys aren't the same as yours though so the experience can always be different.

    Ynnekdude ,
    By the way, how much does CO install run by with CPT? Can you PM me?

  32. #32
    Active Member Four Rings CorneliusRox's Avatar
    Join Date
    Jul 19 2011
    AZ Member #
    78443
    My Garage
    2003CBR600rr, 1997 12VCummins4X4
    Location
    Westminster, Denver, CO

    What is CPT? and I installed them myself.

    Corey - BSME

    08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
    359awhp/K03

  33. #33
    Veteran Member Four Rings Sanjman's Avatar
    Join Date
    Nov 16 2006
    AZ Member #
    13439
    My Garage
    nothing else special
    Location
    Skokie, IL

    sorry meant that part for Ynnekdude

  34. #34
    Senior Member Four Rings Ynnekdude's Avatar
    Join Date
    Dec 10 2008
    AZ Member #
    36220
    Location
    Chicago

    Quote Originally Posted by CorneliusRox View Post
    What is CPT? and I installed them myself.
    CPT = Chicago Performance and Tuning in Melrose Park. I've seen some pretty unreal cars in there (GT3 cup cars, GTR, RS6, various 911's...)

    Sanjman, PM'd
    2011 Q5 3.2 Prestige. Meteor Gray.
    2009 A6 3.0T Sedan w/19" Sport Pkg. Phantom Black.
    APR 93 Stage II+. STaSIS Exhaust. Custom Intake. Stoptech ST-60 355mm. H&R Rear Sway
    V1 Hardwired. LI-Dual. 18" VMR 708s w/Michelin Pilot Alpin PA3s (Winter)


  35. #35
    Senior Member Four Rings NeedingAnAudi's Avatar
    Join Date
    Mar 16 2009
    AZ Member #
    39975
    My Garage
    99.5 A4 1.8TQM
    Location
    Lombard, IL

    Quote Originally Posted by JDM EJ1 95 View Post
    try my good pal Rob at just tires in arlington heights on rand... he aligns everything i bring there.

    or Thalmans alignment in northbrook Illinois.. they have an in ground Flush mounted rack. they can do anything.
    Hey do you know the prices on either of these places by chance? Need to get my alignment fixed real bad.
    Brilliant Black B5 ..... 25k on Street Built Engine
    Strictly Pleasure/Zero Clearance/Stretch Your Legs IX
    Alex



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


 
    © 2001-2013 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.