What did you do to your B7 today?

[reggaemylitis]

looks like he did not seeing that it's mandatory to have one installed after your 2nd.

Oh yea by the way do not go to a party and decide to see who the drunkest is with that, you will get your 3rd that way.

Unfortunately in Sacramento and LA counties with a pilot program that is about to go STATEWIDE, it is a mandatory 5 months with this beotch for your first offense. 2nd offense is 12 months. Just FYI for the Cali folk. Definitely won't make that mistake twice, and you'd have to be Lindsay Lohan's retarded azz to make it a 3rd time!

[co_pa]

i just had to order a left side license plate light bracket. my screws rusted and stripped.

how the hell is this piece of shit part $30 shipped from everywhere?!

oh and my 034 motor mounts came in. soon to be installed when i put my new summer set-up on and finish up my "stance".

[RAudiB7A4]

looks good. are you on springs? if not crank down that front!

Wish I could! I'm on a Vogtland cup kit. I'm hoping to get some coilovers next year. I need to get my hands on some Bi-Xenons first!

[crazytex21]

changed out my valve cover gasket, swapped my coil packs with the red revision, switched my spark plugs to some Denzo Iridiums, and swapped out my N80. Betty is now running like a dream. i was having some sluggishness and it is gone now.

[Shanks_26]

Stage II APR flash

[s4b585]

Installed some license plate LED's and didn't get a bulb out warning

[SLYCAT]

Did some detailing; machine polish and waxing, then decided to finally change out my fuel filter. Took like 20 mins.

[9Hooker]

changed my clutch and flywheel. are we back on topic yet?

[jrtrainor]

Changed my plugs and filters. Too much of a hassle to do the oil as i dont have a proper way to get the car up off the ground Gonna whimp out and pay the stealership to do it.

[yungcotter]

unless our lowered you can do it on the ground just get a low profile oil pan and an oil filter wrench you can get at it from the top side.

[papadelogan]

Plastidipped my wheels the "gunmetal" from DipYourCar.com - friggin' HORRID looking!! I'm sure I rushed it, but the flat/matte finish makes it look like some neighborhood punks vandalized my car. Ripping that crap off tomorrow!!!

Drove down a dirt road and got her good & filthy.

Other than that I had an absolutely shitty day.

[TMurt]

Spark plugs and RS4 rear sway bar finally

[tankdeer]

unless our lowered you can do it on the ground just get a low profile oil pan and an oil filter wrench you can get at it from the top side.

Rhino ramps = good investment.

[SykoraA4]

wrapped mirrors

[yungcotter]

Rhino ramps = good investment.

I has ramps but i find all of the oil dosent drain when you use them.

[tankdeer]

I has ramps but i find all of the oil dosent drain when you use them.

I suppose you're right but never gave it much thought. I figured if I'm getting 95%+ out I'm probably good.

[jrtrainor]

unless our lowered you can do it on the ground just get a low profile oil pan and an oil filter wrench you can get at it from the top side.

I know i can but I simply don't care to contort myself under the car to do it. I'd rather get it up on a lift and get all the gunk out. I still remember doing the diverter valve without getting the car up and halfway through I seriously considered just taking the bumper off to reach it easier. Ramps are most likely my next purchase for the car but I've also considered getting a full on lift the local high school killed their shop program and are selling the lifts at a steal.

[khaos443]

wrapped mirrors

looks pretty good in my opinion, what'd you use?

[seal66]

Well nothing today since out of town but on wednesday it was lowered and had 034 ca's put on

[nshortri]

I got the new license plate filler from ecs tuning. Installed it in minutes :-)

[Ais4Slow]

SS brake lines., rotors, pads. Got lower, got wider (H/R) and adjusted snub mount (slightly off).

GOOD DAY FOR MY B7!!

[tankdeer]

I know i can but I simply don't care to contort myself under the car to do it. I'd rather get it up on a lift and get all the gunk out. I still remember doing the diverter valve without getting the car up and halfway through I seriously considered just taking the bumper off to reach it easier. Ramps are most likely my next purchase for the car but I've also considered getting a full on lift the local high school killed their shop program and are selling the lifts at a steal.

If your garage can accommodate it and it's as good a deal as you're implying, you'd be a fool not to get a lift.

[A-BlacK_MambA-4]

wrapped mirrors

More info/pics on this please... Looking good Will!!

[djibouti99]

Unitronic Stage 1+ and had Apikol Diff and Stern Tran mounts installed. Spacers coming this week.

[SykoraA4]

looks pretty good in my opinion, what'd you use?

More info/pics on this please... Looking good Will!!

Thanks guys. I try not to clutter this thread up too much so I posted more details in my timeline thread. I used the 3d SILVER Carbon Fiber 200 series from vinyldecal.com. this stuff is slightly thicker then the Di Noc and not too expensive. 15 bucks plus shipping got me enough to do 3 mirrors if I wanted. I still need to figure out if I'll keep them like this or redo them with plasidip metalizer. some of the edges are slightly rough, and there are some fine wrinkles I'm hoping will work themselves out over time, but overall i'm relatively pleased.

[yungcotter]

Valve cover gasket.

Washed it



Sent from my iPhone 4s using Tapatalk

[SykoraA4]

did you fix your headlight?

[yungcotter]

Yea i did that tuesday. This is the 9th time I've had the headlights open lol.

[wildcat333]

SS brake lines., rotors, pads. Got lower, got wider (H/R) and adjusted snub mount (slightly off).

GOOD DAY FOR MY B7!!

Sounds like a VERY nice day for your b7.

[tankdeer]

Installed my new rear springs and almost got my suspension dialed in but got sick of messing with it - I'll finish tomorrow

[wildcat333]

installed my new rear springs and almost got my suspension dialed in but got sick of messing with it - i'll finish tomorrow

omg in4pix

[DRAKLORE]

Corey hope I was able to help you get those could done in 45mins lol

Anyways I'm fiberglassing in the headlight rear panel.

And heres a quick snap shot of my greddy TT cutoff switch install


The rest of my updates are in my thread

[tankdeer]

omg in4pix

I'll try to remember to grab some pics tomorrow. Unfortunately I think I'm going to have to take off the 20mm spacers in the rear. Unless I go nuts with the camber they're not going to fit.

[seal66]

installed the 034 control arms, koni/ebiach suspension, RS4 sway bar.

Have a 034 tranny, motor mounts, and apikol diff mount, bi-xenon headlights and new fogs sitting at home waiting for me to install. Order a valve gasket too.

[jrtrainor]

If your garage can accommodate it and it's as good a deal as you're implying, you'd be a fool not to get a lift.

The only problem is space is tight as is now with both the a6 and 4 I think I'm gonna have to get a carport or something if I get the lift.

[DRAKLORE]

Installed my Greddy TT in ash tray with Funk lighter switch.



Waiting for the resin on my headlight to dry..... Unfortunately I need a new lense as resin leaked onto the face and ate away at the plastic! If anyone can help me source a lense that would be much appreciated

Thanks in advance

[Coderedpl]

Does missing your B7 count?

[GA42.0T]

Cleaned the hell out of my calipers and fully prepped to paint. But the pollen count in Atlanta was about a billion parts per million and I'm not really down for lime green (no offense Shane) calipers ... so basically, just cleaned my calipers.

[jbowser12]

Not all in one day but in the 2 weeks I've owned my B7 A4 (2008 2.0T S-line @60k), I've...

• Had Audi preform the PCV/Flap Motor/Fuel Pressure Sensor Recalls
• Front Brake Pads/Rotors
• Oil Change
• Tensioner/Idler/Serp Belt
• Cam Follower + HPFP Seal
• N80 Valve
• Wipers
• A8 rings

[wildcat333]

holy damn!