Pic Request 20x10

[Mops]

About to hopefully pull the trigger on some Forgestar cf10's if I can get the price right and Exhaustnote does not sell me his p40's;) Going to 20x10 and am unsure what offset to go with. Please post any pics your 20x10 setup and please include offset and tire size. The black car is running an et30 and its not quite enough for me. Thinking about et20 and 5mm spacer in the rear. Also a pic of my current setup running 9.5's. Apples to apples my current is et25 front and et20 rear so in turn I would be going out 5mm from current if I went 20x10 et20 with 5mm rear. And a PS of the cf10 on my car. Thanks in advance for pics/advice

[Staz]

do they make anything wider ? do a little poke / stretch hollla !

[Mops]

Trying to poke a bit and stretch my 275's. holla stazzy...keep your ghey outta here.

[Beast]

[insert mop hand here]

[jusdebleu]

It's either CF10's or ADV 10's for the RS5 once I can order it.

Great wheel. Great price.

[bader.abbas]

mop those will look sick
umm my dpe were 20x10 but had staggered look lips, not sure of offset

[NYSpeedRacer]

+1 on that as well. I'm in the process of ordering 20x10 and would like a good offset w/out using spacers.

[mxrz]

You're missing something from your calculations. Camber. If a 275 series tire on a 20x10 wheel is perfectly flush at camber 0, it will tuck 0.45" at camber -2.0 for example. That's nearly half an inch. Even a single degree either way will move it in or out about 0.23"

[Mops]

Ugh and thanks mx...so whats your recommendation? Compared to the et30 black car should I go with et20 and a 5er on the rear? Will that get me where I want to be? I am on 275/30.

[Mops]

Nobody run 20x10 and know the offset...seriously?

[mxrz]

I can tell you that 19x9.5 ET20 is equivalent to ET26.3 on a 20x10 wheel. Going from 9.5 to 10 with the same 275mm tire will give you 3~4mm of extra ET clearance. Do you want to match your current setup? If not, by how much do you think your current wheel can move out?

[Mops]

I understand now...I would like 5mm front and 10mm rear more than current. Gonna go et20 and add 5mm rear. We shall see soon. Thank you for the response.

[iconoclast]

europa from quattroworld 20x10 285 tires:

[Mops]

I really like that Stasis wheel. Any clue on the et? Def a square setup being the rear looks like it needs a bit more. Thanks.

[KrisHansen]

europa from quattroworld 20x10 285 tires:

Alluring!! :) What tint % do you have there??

[Kparis]

Those Stasis wheels rock!!! Do you have the Stasis lowering springs on that car?

[Mops]

^Not mine but its 20%

[efx1]

i think those Stasis are 20x10 et 28 all around

[tboooe]

I really like that Stasis wheel. Any clue on the et? Def a square setup being the rear looks like it needs a bit more. Thanks.

I really like them too but I just wonder if they are overpriced for what they are? I think list price for a set is $2K for a cast wheel. Are other cast options like Forgestar cheaper and lighter?

[scottykenneth]

20x10 ET25 all around:
PRO: Allows wheel/tire rotation front to back
CON: (but not really): more aggressive front fitment (more susceptible to rubbing if lowered significantly)

20x10 ET35 front, ET25 rear:
PRO: Best (most even) flush to fender fitment all around
CON: can't rotate wheels/tires front to back



Im gonna shop for 20x10 et 25 all four corners then just add a 10mmspacer in the front

[efx1]

you wil rub if you add the 10 mm in fronts making it et15 on 285/30/20

[scottykenneth]

oh whoops- made a mistake-thanks for the correction