Clutch installation help need it :-)

[back183]

Hey guys,
I just order a new clutch from ecs tuning along with a lwfw for my audi a4 1.8tq, I am going to install it myself in my garage I have a transmission jack, my car is already in jack stands, I got all the tools needed, but i could use some help, especially somebody that has done in their audi. Any help will be appreciated im pretty handy with the tools, p.s my clutch should be arriving on monday.
Thanks in advance Oscar!

[back183]

I will provide with some $ or a pack of beers !

[sanchius]

I will provide with some $ or a pack of beers !

Sorry, I've got my own long list of projects to work on, but I've become a big fan of the $75 Harborfreight 1000lb engine support bar for jobs like this.

It lets you lower, tilt & rotate the engine with precision as needed when splitting/joining the trans and the engine.

I've used it to free suspend the engine for a couple weeks when I needed to have the subframe and motor mounts out for a transmission swap & suspension renew on my B4.

I have even used it between two cars parked in my garage to suspend the transmission for an easy drain/fill before installation.

Plus, I feel a lot safer working underneath the car knowing the engine was secure.

http://www.harborfreight.com/automot...bar-96524.html

[drumnjuny]

no experience; still willing to help depending when

[seal66]

I would help but, I am heading back up to wyo for work on tuesday and have to get my car in the body shop before that.