Hey guys,
Looking to buy a large amount like 20+ hose clamps for a little vac leak snooping I'll be doing soon. Anyone know of a good place to buy them around Seattle/North Seattle? I hate going to O'Reillys and buying 20 of the 2-packs for like $3 a pop. Seems like a waste.
Has anyone tried Tacoma Screw?
Results 1 to 6 of 6
-
01-27-2012 04:46 PM #1Active Member Four Rings
- Join Date
- Jun 27 2011
- AZ Member #
- 77478
- My Garage
- 2004 A4 1.8TQ 6MT USP • 2006 A4 Avant 2.0T tip
- Location
- Seattle, WA
-CP
2004 A4 1.8TQ 6MT USP APR Stage 1 - Achtuning Snub - FSI Coils - BKR7EIX-11 (.04" gap) - 710N
Maintenance: 034 Silicon Breather - US Plastics Check Valves - Rev. D SJP - Rev. F PRV - Injector Seats - Coolant Flange
Issues: All control arms are shot - Shitty, poorly worn YK520s - Sloppy TREs - Godawful stock brakes
2006 A4 2.0TQ Avant Tiptronic stocker - Failing TC Mod
-
01-28-2012 11:01 AM #2Senior Member Three Rings
- Join Date
- Nov 19 2006
- AZ Member #
- 13513
- My Garage
- 83 280ZXT 5MT
- Location
- WA
Harbor Freight... http://www.harborfreight.com/40-piec...ent-67578.html
They have several local stores (Everett, Bellevue, etc)2002 A6 2.7T - 6MT Crystal Blue
APR Stage 1
**NEW addition** 2002 allroad 2.7T 6MT
allroad interior upgrade...
http://www.audizine.com/forum/showth...terior-upgrade
-
01-29-2012 11:08 AM #3Senior Member Three Rings
- Join Date
- Jun 02 2008
- AZ Member #
- 29482
- My Garage
- 2004 Audi A4 1.8T Quattro 6Spd, 1997 Jetta Trek
- Location
- Kirkland Washington
Not sure if you can wait and get them online, but mcmaster.com has everything under the sun, and usually delivers 2 daysPlease Drive Right
FS: TT ballast, GTI Stock Springs, 2.0 Cams
-
01-29-2012 03:23 PM #4Active Member Four Rings
- Join Date
- Jun 27 2011
- AZ Member #
- 77478
- My Garage
- 2004 A4 1.8TQ 6MT USP • 2006 A4 Avant 2.0T tip
- Location
- Seattle, WA
Yea timing isn't an issue so I may just do it online.
Harbor freight would be great, but the closest one is almost 30 minutes away so it sort of negates any savings. Thanks guys for the responses.-CP
2004 A4 1.8TQ 6MT USP APR Stage 1 - Achtuning Snub - FSI Coils - BKR7EIX-11 (.04" gap) - 710N
Maintenance: 034 Silicon Breather - US Plastics Check Valves - Rev. D SJP - Rev. F PRV - Injector Seats - Coolant Flange
Issues: All control arms are shot - Shitty, poorly worn YK520s - Sloppy TREs - Godawful stock brakes
2006 A4 2.0TQ Avant Tiptronic stocker - Failing TC Mod
-
01-29-2012 07:46 PM #5Senior Member Three Rings
- Join Date
- May 16 2008
- AZ Member #
- 28851
- Location
- WA
You can always try a hose, plumping and fitting specialty store. They usually have tons of various sized worm gear and t-bolt style clamps on hand.
-
01-30-2012 12:21 PM #6Active Member Four Rings
- Join Date
- Jun 27 2011
- AZ Member #
- 77478
- My Garage
- 2004 A4 1.8TQ 6MT USP • 2006 A4 Avant 2.0T tip
- Location
- Seattle, WA
I actually checked out Tacoma Screw's online catalog and they've got a decent selection of hose clamps. I'll probably just stop in because they are <5 minutes away in Fremont. Now I just need to order some silicon vac line...-CP
2004 A4 1.8TQ 6MT USP APR Stage 1 - Achtuning Snub - FSI Coils - BKR7EIX-11 (.04" gap) - 710N
Maintenance: 034 Silicon Breather - US Plastics Check Valves - Rev. D SJP - Rev. F PRV - Injector Seats - Coolant Flange
Issues: All control arms are shot - Shitty, poorly worn YK520s - Sloppy TREs - Godawful stock brakes
2006 A4 2.0TQ Avant Tiptronic stocker - Failing TC Mod
Reply With Quote
Posting Permissions
|
|
||||
|
© 2001-2012 Audizine, Audizine.com, and Driverzines.com
Audizine is an independently owned and operated automotive enthusiast community and news website. Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG. |
 |
|||
Bookmarks