Introduction: BAT content inside

[morzechowski]

Hi.

Mike
I'm from Minnesota

Teaser Video: http://www.youtube.com/watch?v=f_btq...layer_embedded


Info:
1998 Audi A4 1.8tqm
rare terracotta cloth full interior in beautiful condition

Electronics:
Haltech Platinum Sport 1000 standalone EMS
Haltech modified Racepak IQ3
2.0 FSI Coils ICM Delete
AEM wideband

Block:
Bored 82.5mm
JE Forged 82.5mm Pistons 9.25:1
Scat Rods
ARP Main Studs
034 Coated Main Bearings
034 Coated Rod Bearings


Head:
Stock AEB Head
ARP Head Studs

Boost:
Garrett GT3076r /.63
Garrett 600hp Intercooler
TIAL Wastegate
TIAL Q BOV

Exhaust:
SPA Manifold
034 3" downpipe with WG dump
3" SS pipe all the way back made by me
3" Vibrant resonator
3" in/ dual 3" out Vibrant Muffler

Fuel:
E85 tuned by Full Blown Motorsports
Bosch 044 Drop In Pump
Bosch 1000cc EV-14 Injectors
Fuel Lab AFPR
034 Fuel Rail
-6 AN Fuel Lines
































bling bling skeet skeet.

[biketsai]

Welcome! Looks like a pretty awesome setup.
Nice engine hoist btw.

[morzechowski]

Welcome! Looks like a pretty awesome setup.
Nice engine hoist btw.

Minnesotan engine hoist ;)

[ZimbutheMonkey]

Looks good man, I'm not much into exterior cosmetics, but the stance on that car really appeals to me, nicely done.

[Seerlah]

Nice

[blackwat5r]

Did that Deere influence the color of the valve cover/IM? Likin all of it, looks solid

[Gaberossi]

I think it was borats suit^^ lol
welcome and sick whip

[coolgraymemo]

"Very nice!"

Stance is also on point.

[Audi Skate Snow]

Looks good. That is one way to pull a motor.

[bmarshall]

AEM orrr 034 standalone? idk someone help me make a decision.

Haltech PS1000 ecu.

[coolgraymemo]

Wait... that's a 98?

Facelift handles, fenders, fogs...

[Turbwhistle]

Did that Deere influence the color of the valve cover/IM? Likin all of it, looks solid

Or the 7up can in the 4th picture from the bottom. Looks great.

[morzechowski]

Wait... that's a 98?

Facelift handles, fenders, fogs...

caught me. I accidentally posted my 01 A4 in the first two photos of my build threads, I then just copy/past here.

here are some photos of the actual car we are speaking of.







^^ che che check out mah catch can yo.? gotta stick a filter in thuur... No seriously, that crap is so expensive, damn strait I'm going to use the can for something productive. I have an 034 catch can on the other side of the bay for the block as well ;)



I painted things green, because I thought it would be sweet. Then realized not very sweet. Then allowed friends to draw on it. why not. will powder coat and fab my own intake mani soon.









still not very good photos of the car in full, I'll save that until its actually moving.

alright now, feel free to chime in with any standalone info. I am really leaning towards AEM. Does anyone have a working AEM system in their AEB?

also, Rob, or any mods, can you please lift the probation/restriction crap on my account? I would love to come into your threads and cause some shenanigans.

[morzechowski]

oh and my t-bolt clamps are in the mail. so please hold yourself back from talking down my clamps

[viceprp]

Jk35 ran AEM with his 3076, w/m, nos, and many extras.

I'm running the new ems-4 with my ATW build with the same mods minus nos. If you have any questions, I can direct you to him.

[viceprp]

My car:
Tial GT3076
Aem ems-4
ID1000
Aem w/m
3" straight exhaust
Tial 44mm dv
Tial 50mm bov

[flynnr]

Yes! This is where this build thread shold have been this whole time! (well, in the projects and builds section of this forum, but the mods will move that soon im sure)

I liked the green VC, but after the IM was sitting next to it it lost its sexyness.

I wish i knew more about standalones to help you though mike - It's part of the reason i just bought my coupe quattro to be honest (for a winter beater), my car hates cold starts, which come all too often living in MN.

Are you planning on staying mafless then? ( I would recommend against that, but its your build, your decisions)

btw - we neeeed to get together soon and find some vr6 TB's (if you havent found one yet)!

look at this thread, post # 207 (where i got my insight)

http://www.audizine.com/forum/showth...d-(pics)/page6

[morzechowski]

Ryan yea I know, I'm not sure why it took me so long to start posting here.

Question: What 4" filters are you spa manifold guys running on the front of the turbo? I know that's a tough fitment.

[s3apra4]

Nice job
Love the stand in catch can!!!!

[Wet0willy01]

btw - we neeeed to get together soon and find some vr6 TB's (if you havent found one yet)!

look at this thread, post # 207 (where i got my insight)

http://www.audizine.com/forum/showth...d-(pics)/page6

http://www.audizine.com/classifieds/...h-s4-tb&cat=21

[turbo kraut]

looks good

[morzechowski]

http://www.audizine.com/classifieds/...h-s4-tb&cat=21

what is the difference between the S4 TB and the OBDI TB? are they both DBC?

either way, I think a junkyard date with Ryan will do. supposedly we can pick up some OBDI's for under $20.

[bw86]

Nice build!

I'm also about to be running the AEM EMS-4 in my car. Harness/ecu should be here soon.

sick catch can

[Crispy222]

S4 TB is DBC

[Wet0willy01]

Shoot forgot you were DBC. Carry on, good luck with the build



[/sameless plugs]

[morzechowski]

Nice build!

I'm also about to be running the AEM EMS-4 in my car. Harness/ecu should be here soon.

sick catch can

where did you order from? and what harness did you go with/ where did you get it from?

thanks

[bw86]

where did you order from? and what harness did you go with/ where did you get it from?

thanks

I got mine from JK35 - a member on here. He also is making me the harness for it.

[morzechowski]

I got mine from JK35 - a member on here. He also is making me the harness for it.

does anyone know what the harness consists of? I assume you would start with the AEM Universal Harness for $200 then modify it for the AEB, but what I am curious about, is what all goes into modifying the harness for our AEBs?

here is the uni AEM harness.

[bw86]

I'll send you a detailed pic of my harness when I get it, if that's any help.

[morzechowski]

I'll send you a detailed pic of my harness when I get it, if that's any help.

[A4Rob]

does anyone know what the harness consists of? I assume you would start with the AEM Universal Harness for $200 then modify it for the AEB, but what I am curious about, is what all goes into modifying the harness for our AEBs?

here is the uni AEM harness.

You will still need to piggyback the stock ECU to get the Speedo and tach signal. Are you for sure doing the mastero now?

[A4Rob]

Almost forgot to say, welcome to AZ! Tons of great knowledge here.

[Turbwhistle]

morzechowski, I envy you.

rob said it, hi mike, welcome to audizine.

[morzechowski]

Rob, I am for sure going with maestro until I piece together my AEM setup. I am going to swing into Stellar tomorrow morning and get everything ordered up.

[A4Rob]

Rob, I am for sure going with maestro until I piece together my AEM setup. I am going to swing into Stellar tomorrow morning and get everything ordered up.

Awesome Mike,

You are in good hands.

[bw86]

You will still need to piggyback the stock ECU to get the Speedo and tach signal. Are you for sure doing the mastero now?

Supposedly I'm not going to be using the stock ecu for the speedo, tach. I'm not quite sure how - I'm just going by what the guy making my harness said.

[ZimbutheMonkey]

Any reason that you're not staying with the Maestro?

[ZimbutheMonkey]

You are now officially Captain Approved!!!!!!!!!

[nate09]

Awesome build going on. Don't mean to side track, but do you have any pics of the hitch set up on your 01? If you do you can PM them to me if you don't wanna clutter the thread.

[morzechowski]

Any reason that you're not staying with the Maestro?

standalone is a lot more versatile. There are so many more options with it instead of the AEB Maestro.

if you pull up a specs page on AEB Maestros capabilities, and then the AEM standalone options, you will see the difference.

Awesome build going on. Don't mean to side track, but do you have any pics of the hitch set up on your 01? If you do you can PM them to me if you don't wanna clutter the thread.

I can snap a photo. Its just a Curt hitch, it has a U brace that wraps around the spare tire area with 5 bolts. pretty solid, but I would not tow any campers or boats with it unless further modified.