Audizine - An Automotive Enthusiast Community

Page 6 of 6 FirstFirst ... 456
Results 201 to 215 of 215
  1. #201
    Active Member One Ring //Sporty's Avatar
    Join Date
    Jul 11 2016
    AZ Member #
    376145
    My Garage
    84 urq; 94 urs4; 01.5 s4; 10 a4 sline
    Location
    leominster/mass

    the CQ

    Guest-only advertisement. Register or Log In now!
    kind of quiet lately. the 1990 CQ. another great car.


  2. #202
    Active Member One Ring //Sporty's Avatar
    Join Date
    Jul 11 2016
    AZ Member #
    376145
    My Garage
    84 urq; 94 urs4; 01.5 s4; 10 a4 sline
    Location
    leominster/mass

    really need to get a good photo of the urq. can no longer link to picasa. whos the image hosting of choice?


  3. #203
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    YAY. Our pictures are back!

    We had all our early pictures hosted on some servers that went away. Now we have them hosted more securely and have replaced all the broken links. As a bonus you can also see full size images for this and all our other builds here: https://www.flickr.com/photos/team_illuminata/albums
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  4. #204
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    Feels like we are very close. Also feels like winter is approaching. Better get cracking.

    Started cleaning the fuel injection system. Decided not to dismantle it and just leave well alone.

    image by Team Illuminata Motorsport, on Flickr


    Air filter housing:

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    New injectors and seals

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    Battery!

    image by Team Illuminata Motorsport, on Flickr
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  5. #205
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    On a roll now :)

    Jumped the fuel pump relay to drain some old fuel.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    New filter

    image by Team Illuminata Motorsport, on Flickr


    Had to come up with a way to mount this thingy-me-jig as the mounting tabs were long gone.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    Turbo inlet. Tight down there.

    image by Team Illuminata Motorsport, on Flickr


    and fuel distributor

    image by Team Illuminata Motorsport, on Flickr


    Our parts shelf is look quite bare now.
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  6. #206
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    Today's progress. Hopefully not this weekend's progress.

    Connected the fuel lines to the warm up regulator.

    image by Team Illuminata Motorsport, on Flickr


    New fuel filters:

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    image by Team Illuminata Motorsport, on Flickr


    There really isn't much left to do. At least to get it running:

    CRANK BOLT
    THROTTLE BODY
    WIRING ISSUES
    SPARK PLUGS
    TRANS FLUID

    Then once it works:
    COOLANT
    REAR BRAKE LINE
    BLEED BRAKES, CLUTCH
    PS STEERING FLUID
    WIPERS
    BUMPER
    HEADLIGHT
    INJECTOR BLOWER
    TIGHTEN CONTROL ARMS
    ADJUST SHIFT LINKAGE
    ALIGNMENT
    DETAIL

    Then we put it away for the winter.
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  7. #207
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    So, assembly continues as we edge nearer to the momentous day when it drives itself off the hoist, hopefully down the road and not into winter storage.

    Got the throttle body cleaned, adjusted and back on.

    image by Team Illuminata Motorsport, on Flickr

    Then had to fix the inlet air temperature sensor.

    image by Team Illuminata Motorsport, on Flickr


    Fortunately our 83 has one that looks like it was a replacement once. Ohms check check out too.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    A bit of electrical shenanigans and it's in.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    Then there was nothing left to do but call my Audi expert, Werner then fire it up!

    https://www.youtube.com/attribution_...m-upload_owner

    <iframe width="560" height="315" src="https://www.youtube.com/embed/_4JomNrdCRo" frameborder="0" allowfullscreen></iframe>



    Doesn't idle yet and still needs coolant but we had a little celebration anyway.

    image by Team Illuminata Motorsport, on Flickr
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  8. #208
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    As this project is sort of wrapping up we started another one we thought you might like. Introducing the Audi UR Quattro Rally Build.


    transformation by Team Illuminata Motorsport, on Flickr
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  9. #209
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    So, a lot of work but not a lot of updates. Here's why.

    Bled the brakes.

    image by Team Illuminata Motorsport, on Flickr


    Reinstalled the grill and the bumper.

    image by Team Illuminata Motorsport, on Flickr


    and put it back on all fours for the first time in years.

    image by Team Illuminata Motorsport, on Flickr


    Then got it to idle and run quiet.

    https://youtu.be/4aqI0iT-wP8

    <iframe width="560" height="315" src="https://www.youtube.com/embed/4aqI0iT-wP8" frameborder="0" allowfullscreen></iframe>


    Then drove it off the lift.

    https://youtu.be/Qp0ASTHZ-V8

    <iframe width="560" height="315" src="https://www.youtube.com/embed/Qp0ASTHZ-V8" frameborder="0" allowfullscreen></iframe>


    Then took it for a drive.

    https://youtu.be/ypoHY6EsoyQ

    <iframe width="560" height="315" src="https://www.youtube.com/embed/ypoHY6EsoyQ" frameborder="0" allowfullscreen></iframe>


    Then stood back and admired it

    https://youtu.be/FfhyveNAIPI

    <iframe width="560" height="315" src="https://www.youtube.com/embed/FfhyveNAIPI" frameborder="0" allowfullscreen></iframe>



    Happy birthday to me!
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  10. #210
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    Sorry about the lack of updates. Got distracted by some work related events not the least of which was attending LSPR with our 911 and other assorted old rally cars.

    14695439_1305247436187424_7489908328833138150_n by Team Illuminata Motorsport, on Flickr


    Since I got back I haven't worked on the car but taken every opportunity I could to drive it. This included a funeral, a couple of cars and coffee events, an open house and running to Autozone for parts for our ailing Allroad.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    I'd forgotten how much I enjoy driving this car and how much attention it gets. I'm going to try to enjoy it as much as possible before it goes away for the winter. It drives very well, is smooth and quiet but does have a slight hesitation under load though it pulls strong. I can figure that out and put the remaining few parts back on this winter. For now LET"S DRIVE!
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  11. #211
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    Been looking for opportunities to show of the car and have some fun with it before we run out of season.

    The demise of our A3 left us with some 17" BRAID Fullrace A wheels and 225 tires lying around and with the help of the spacers that our ALLROAD doesn't need with it's winter wheels it soon became obvious what we must do. Throw them on the quattro!

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    This is only for fun mind you. They are a little contemporary and the 225/45-17 tires are about an inch to tall but it was well received in this state at our local meet Saturday.

    image by Team Illuminata Motorsport, on Flickr


    You can feel the extra weight and diameter when driving and there is s slight rub somewhere on full lock but they are about the same diameter as the package we are planning to use on our 83 build so worth the trouble. 15" BRAIDs go back on soon.

    The car is starting to srtuggle to start again now. Runs great once warmed up exept for a slight hesitation around 4000 rpm. Maybe the cold start valve? It is also pissing out hydraulic fluid still. We replaced everything around the bomb except the pressure switches so we suspect those. New ones are on the way.

    image by Team Illuminata Motorsport, on Flickr


    We have also been tidying up the mess we gad left over from the project. This consists of mostly parts that need to go into boxes and parts that still need to go on the car.Tok care of inventorying and boxing parts and installed the plastic underbody stuff.

    image by Team Illuminata Motorsport, on Flickr


    So just the cruise control actuator and injector blower to reinstall when we get chance. Holding off for now until we diagnose the starting issue though.
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  12. #212
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    It's been winter for too long already so no driving the 85. No working on it either as our 83 rally build and wheel sales have been keeping us busy. We have been picking away at the hydraulic system leaks however. We easily sourced some new pressure switches for the hydraulic bomb and quickly replaced the one on the side. However we did manage to disconnect a wire in the process.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    The one underneath was a different prospect requiring us to access it from below. This, of course, took many, many weeks to get round to until recently when we finally drove it onto some ramps in the showroom.

    image by Team Illuminata Motorsport, on Flickr


    where it sat for another couple of weeks till we had time to crawl under it. It soon became anther classic Audi "unscrew the simplest thing, if you can" project until we found just the right 24mm deep socket to get the switch off. At first we tried loosening the bomb from it's moorings but you cant undue these two nuts even though you can see them:

    image by Team Illuminata Motorsport, on Flickr


    Finally found a thin wall socket that fit.

    image by Team Illuminata Motorsport, on Flickr


    This still left the wiring issue to fix.

    image by Team Illuminata Motorsport, on Flickr


    Think this is where it came from.

    image by Team Illuminata Motorsport, on Flickr


    This puppy cost $35! Well, it was free, but we had to buy $35 worth of zip ties to liberate it from the box of 100 we were supposed to buy.

    image by Team Illuminata Motorsport, on Flickr


    Soon had it on and back on the switch.

    image by Team Illuminata Motorsport, on Flickr

    image by Team Illuminata Motorsport, on Flickr


    Of course we can't tell if it's solved the leaks till we drive it and it's still too salty outside. Never mind, now we can fix the leaky rear diff. However, this involves putting it on the lift and you now how long it took to get it off there last time! Wish us luck.
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  13. #213
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    Uh oh! Car is on the lift again! Hopefully not for two years this time.




    The plan is to drop the diff and reseal it. Three main seals to replace and I think they are all leaking to some extent.








    My first plan was to undo the axle and drive shaft bolts, undo the diff mounts and then, hopefully wrangle the diff out. All the axle and drive shaft bolts came out easily but, however, it looks like the axles don't have enough axial free play to release and the subframe bushings have seen better days so new plan is to remove the diff with the subframe. Still have to separate the axles and drive shaft first though. Probably going to remove the track rods and lower control arms at the subframe and leave the struts hanging.




    Must remember to disconnect the diff actuator though.




    So, how hard could it be?
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  14. #214
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    How hard could it be? Very

    Well the axles and drive shaft needed some persuasion to let go of their respective couplings. A few wacks with a hammer did the job. I made some room by disconecting the lower control arms and the tie rods from the subframe.




    Then moved on to the subframe bolts. Two came out easily. the rear right was seized in the sleeve but that tore out of the bushing so it did unscrew at least. The rear left just broke it's head off as soon as it saw the socket approaching.




    We still managed to free the subframe from it with a bit of brute force but that left a siezed bolt taunting us in place.






    So my friend Carlos welded a nut to it but as soon as we offered up the big socket to attempt to unscrew it we realised it was already hand tight! The power of heat. It's magical.





    So next is inspection and tear down of the diff and subframe. Oh, and finding lots of parts.

    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

  15. #215
    Established Member Two Rings team illuminata's Avatar
    Join Date
    May 10 2011
    AZ Member #
    75276
    My Garage
    85 UR quattro, 97 Outback race car
    Location
    Birmingham, Michigan

    We started to dismantle the diff and subframe. Dismantle might be too strong a word and we are just replacing bushings and seals, but it is an old Audi.

    Drive shaft and both axle flanges are out.




    This is the big seal on the left. No longer available but 034 Motorsport had some made. Phew!




    Will need to replace this as it broke off the diff lock actuator shaft.




    Will be replacing the diff lock actuator too of course. Already have a new one of those. The rear mount has seen better days. It will have to go. Have a couple of these in the parts bin though :)




    and the left tie rod boot is split so this will have to be replaced too. Fortunately still available as a complete unit.




    And, of course, new subframe bushings from Germany! So here we are, waiting for parts, again.
    Paul Eddleston
    Team Illuminata Motorsport
    www.teamilluminata.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2017 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.