AMC's GTX2867R Build Thread

[AMC]

I guess I've waited too long, also Gearhead forced me to make one lol

Engine size: 3.0L
Rods: Integrated Engineering
Pistons: Diamond Racing
Heads: 2.8
Cams: 2.8
Valvetrain: Ferrea
Intake Valves: Ferrea
Exhaust Valves: Ferrea
Head Gaksets: Stock
Intake Manifold: Ported RS4
Y-Pipe: RS4 hopefully
Throttle Body: 80mm Hemi
Diverter Valves: Forge 007
Turbo kit: Custom
Turbo(s): HTA Tial GT2868's
MAF: EPL GT MAF
Fuel Rails: 034 Motorsport Fuel Rails
Injectors: Bosch ev14 83 lb
Fuel Pump: Bosch 044 In-Tank pumping to custom surge tank with twin Bosch 044s in parallel
Surge Tank: Custom
Fuel Pressure Regulator: Aeromotive A1000
Tune: EPL
Water/Meth Injection: Aquamist HFS-3
Clutch: Tilton Twin Disc Cermatallic
Intercooler(s): DuH FMIC
Mounts: 034 Motor and ASP Tranny
Exhaust Manifolds: Custom Tubular
Downpipes: V-Banded Eurostate 3"
Exhaust: Custom Eurostate 4"
Coil-overs: St Suspensions
Wheels: merc clk 320 for drag
Front Brakes: unknown so far
Rear Brakes: unknown so far
Miscellaneous: DTS, ASP Rear Diff Mount, etc

On to the pics:

[Capt. Obvious]

It'll never run.

[gearhead1186]

[Dutchsider]

Nice, more to watch

Damn, 2011 seems to be the year of builds. This stuff happen every year around here?

[Vinchenzo51]

subscribed

can't wait to see the progress

maybe now you'll be able to spin BOTH sets of tires

[AMC]

lol ill need quaifes

[sherbet]

nice! Is that the motor out of your car or is that a spare longblock?

[bondar1989]

thats amazing thing shud be preety quick ;)

[AMC]

nice! Is that the motor out of your car or is that a spare longblock?

spare block man, gotta enjoy my car while im building

[Jurjen]

This thing is gonna be crazy!

[sherbet]

spare block man, gotta enjoy my car while im building

haha yeah I assumed. Good luck with everything! Loving these 3L builds popping up everywhere. By the time im ready to build mine in a few years there will be lots and lots of data on turbos/displacement. Builds like yours are def. helping pave the way

[s2the4]

agron wtg makes me think its about time to upgrade

[BENI_BOY]

should i make a build thread also?

[sean01S4]

Good shit agron that thing is going to be a beast I wanna be like u lol no homo sweet cheeks ...clutch is being ordered tomorrow then off to epl for a new n75 valve and tune I still owe u a ride!!!

[sean01S4]

hhell yea arben Ur car is going to be one of the sickest b5's around!!!

[quattEUro]

AHH!!! my brother from an albanian mother!

[S4UCE]

Arben should have a build thread too. It could be called "AMC's Build Thread"

Great success. Hotel Albania is going to have a nice pair of S4s out front.

[Das General]

Looks good kid. But why question. Why no 10secS4 tune?

[AMC]

thanks guys! honestly cant wait till its running should have block and manifolds done around next month or so then the wait to afford the turbos lol

[Bimmerchop]

No way guy!

[AMC]

Looks good kid. But why question. Why no 10secS4 tune?

lol marc is my boy so nothing bad or sour there but hes not into doing tunes no more also im spending a fortune on the motor build so y not

[AMC]

No way guy!

way guy! lol

[joemomma]

Good luck bro!!! cant wait till its finished!!! rematch with the r1??? lol

[AudiSportB5S4]

Good luck Agron - Hope it all turns out as expected!

Damn, 2011 seems to be the year of builds.

I've been on this site since 2007, and each year someone says this exact line with a different year input.

[NOTORIOUS VR]

Awesome! I want a 3L!

Good luck with the build!

[buddysnack]

Awesome! I want a 3L!

Good luck with the build!

Build it and they will want more!

[Jason:addict]

Nice

May want to ditch the Duh...

[wdbdy2000s4]

Nice rods. (no homo)

[Evilevo]

Nice rods. (no homo)

Very homo

[DiscoPotato]

Subscribed.

[AMC]

Nice

May want to ditch the Duh...

I dont want to tho the quality of the duh is insane haha I was thinking of getting a bell core the same length that flows better and weld the duh end tanks on

[Cadiburns]

Has there been any testing on the 80mm TB that shows it provides optimal flow? Just curious.

Impressive list of parts and can't wait to see what the build looks like when all finished.....as well as it's progression.

[cjk]

Sounds fun! Good luck with the build and ditch the turd DUH...it is a nicely made unit for sure, but not for the HP you are going to be pushing.

[AudiA4_20T]

Why a custom kit? Every kit I've seen other than Tial has been dissapointing

Edit: did this Eurostate place give u a good deal on all the fab if they could make their own kit?

[AMC]

Sounds fun! Good luck with the build and ditch the turd DUH...it is a nicely made unit for sure, but not for the HP you are going to be pushing.

i know an i know i dont wanna let it go thats why im gonna try welding a better flowing core on the duh end tanks

Why a custom kit? Every kit I've seen other than Tial has been dissapointing

Edit: did this Eurostate place give u a good deal on all the fab if they could make their own kit?

tial turbos and waistgates. custom vband tubular manifolds.

and yea eurostate got me a great deal. they already make a kit for b5 S4's direct bolt in (3 inch downpipes single 3.5 exhaust) they also can custom make them on the car and thats what they will do with mine.

edit: EuroState is making my turboback and some other bitties and another shop is making the manifolds

[Reich]

Looking good. There's gona be lots of powerfull s4 comming this summer.

[AudiA4_20T]

If your running Tials why bother with manifolds? Are you trying to make 800whp?

[NOTORIOUS VR]

If your running Tials why bother with manifolds? Are you trying to make 800whp?

He doesn't mean Tials as in 605/770.

[AMC]

If your running Tials why bother with manifolds? Are you trying to make 800whp?

they are vband'd from the manifold to the turbo. im building a 3l car y not give it as much potential as i can

[AudiA4_20T]

Idk because the highest hp cars have been 770s