Custom exhaust built at trexturk's shop for my B6 1.8T tiptronic ultrasport around December of 2009.
This is a cat back so includes a larger downpipe as well. $400 takes it. Car is at J's Repair and Performance in Plainfield. You'll be responsible for all install costs.
Ends in dual magnaflow 14851's, it's fairly loud (more deep than anything). See below for pictures.
Results 1 to 16 of 16
-
09-09-2010 11:48 AM #1Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
-
09-10-2010 06:42 PM #2Active Member Two Rings
- Join Date
- Mar 19 2009
- AZ Member #
- 40122
- My Garage
- Varies often.
- Location
- Edwardsburg, Mi
What size piping does it use ? Does it fit proper ? No sagging ?00 A4 Avant
03 Audi TT BT
09 A4 Prestige 2.0t Quattro
-
09-10-2010 10:27 PM #3Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
Fits perfectly, it has rust on some of the welds but thats inevitable being in Chicago. The actual piping, mufflers, and resonators have no rust.
I don't remember exactly, but sizing appears to be 2.5 inch throughout with 4inch tips. Some pics:
-
09-24-2010 02:39 PM #4Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
Bump
-
10-03-2010 04:02 PM #5Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
anyone?
-
05-15-2011 08:24 AM #6Registered Member One Ring
- Join Date
- Feb 04 2011
- AZ Member #
- 70498
- Location
- Sacramento,CA
Do you still have the exhaust?
-
05-18-2011 11:46 PM #7Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
Yup, but if your in Sacremento, CA it's not going to happen, I'm looking for a stock exhaust in trade + cash.1.9L GT3071r 517 trans
Mods: Eurodyne Maestro 7 / Stasis Alcon 355mm Mono6 / 034 Billet Fuel Pump 005 / Neuspeed snub mount / RS4 rear sway / Custom Magnaflow 14581 exhaust / INA adapters with FSI coilpacks / Thor Skidplate / CF S4 blades / DTH CF Roof Spoiler / RD led lp / Smoked sidemarkers / 3k HID fogs / 35% tint / Symphony II+
-
05-19-2011 09:41 PM #8Senior Member Four Rings
- Join Date
- Jun 23 2009
- AZ Member #
- 44097
- My Garage
- 04 A4 USP, 05 gsxr 600
- Location
- Chicago
hmmmmm how much cash and how loud is that thing??
Originally Posted by nofearhawk
04 Audi 1.8T USP - Rimda
NEED A FENDER ROLLER? OR FENDERS ROLLED?-PM ME
ProperFIT
Wheelwhores
-Admir
-
12-11-2011 12:44 PM #9Active Member Two Rings
- Join Date
- Dec 10 2011
- AZ Member #
- 85087
- Location
- Des Plaines IL
doubt its still available?
-
12-12-2011 04:47 PM #10Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
lol, not really, hit up trexturk in east chicago, he'll make you one1.9L GT3071r 517 trans
Mods: Eurodyne Maestro 7 / Stasis Alcon 355mm Mono6 / 034 Billet Fuel Pump 005 / Neuspeed snub mount / RS4 rear sway / Custom Magnaflow 14581 exhaust / INA adapters with FSI coilpacks / Thor Skidplate / CF S4 blades / DTH CF Roof Spoiler / RD led lp / Smoked sidemarkers / 3k HID fogs / 35% tint / Symphony II+
-
12-12-2011 06:03 PM #11Active Member Two Rings
- Join Date
- Dec 10 2011
- AZ Member #
- 85087
- Location
- Des Plaines IL
how much did you get it for?
-
12-21-2011 05:58 PM #12Veteran Member Four Rings
- Join Date
- Jan 14 2008
- AZ Member #
- 24138
- My Garage
- A4 USP Avant, C6 A6 3.2Q, B8 A5 3.2Q
- Location
- West Coast of Michigan
Will this fit a USP avant?
FS: Authentic HRE caps - http://www.audizine.com/classifieds/...0&ppuser=24138
-
02-29-2012 09:14 AM #13Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
Bump, exhaust is up for sale again as I'm doing a motor swap and am looking to switch to an entire 3" turbo back design. Car is currently sitting at J's in plainfield1.9L GT3071r 517 trans
Mods: Eurodyne Maestro 7 / Stasis Alcon 355mm Mono6 / 034 Billet Fuel Pump 005 / Neuspeed snub mount / RS4 rear sway / Custom Magnaflow 14581 exhaust / INA adapters with FSI coilpacks / Thor Skidplate / CF S4 blades / DTH CF Roof Spoiler / RD led lp / Smoked sidemarkers / 3k HID fogs / 35% tint / Symphony II+
-
03-10-2012 10:35 PM #14Active Member Two Rings
- Join Date
- Dec 10 2011
- AZ Member #
- 85087
- Location
- Des Plaines IL
still in the same condition and what not?
-
03-14-2012 09:22 AM #15Veteran Member Four Rings
- Join Date
- Aug 31 2007
- AZ Member #
- 20722
- My Garage
- 04 1.8TQ
- Location
- Chicago, IL 60601
Yup, since the car has only been running for maybe 3 months out of the past year...... lol1.9L GT3071r 517 trans
Mods: Eurodyne Maestro 7 / Stasis Alcon 355mm Mono6 / 034 Billet Fuel Pump 005 / Neuspeed snub mount / RS4 rear sway / Custom Magnaflow 14581 exhaust / INA adapters with FSI coilpacks / Thor Skidplate / CF S4 blades / DTH CF Roof Spoiler / RD led lp / Smoked sidemarkers / 3k HID fogs / 35% tint / Symphony II+
-
03-22-2012 09:36 AM #16Active Member Four Rings
- Join Date
- Jul 19 2011
- AZ Member #
- 78443
- My Garage
- 2003CBR600rr, 1997 12VCummins4X4
- Location
- Westminster, Denver, CO
you should PM me on how much you paid for that. I am thinking of going 3" to 2 - 2.25"
Corey - BSME
08 A4 6MT, Quattro, VAST Stg1, Cupra Lip, VAGCOMed, Hawk Pads, RNS-E, 10f/15r Spacers, Eyelids, Black Vinyl, RevD DV, JOM C/O's - 24.75" FTG, 255/35-18 V12's
359awhp/K03
Reply With Quote
Posting Permissions
|
|
||||
|
© 2001-2013 Audizine, Audizine.com, and Driverzines.com
Audizine is an independently owned and operated automotive enthusiast community and news website. Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG. |
 |
|||
Bookmarks