1.8l + PTE5857 = 425awhp?

[pape]

The psi manifold is a much nicer design

but the spa puts the turbo on top (eye candy)

Ohh and it also fits a PTE 5857. The 5857turbo will sit about 3/8th of an inch from the head and the compresor will be about 1/8th of an inch from the runner 1 on the manifold.

I dont think the psi manifold will fit a 5857

[Dan[FN]6262]

thats what im worried about ^

[dougyfresh]

thats what im worried about ^

I was thinking about exhaust manifold options for you, Dan.

Another manifold to consider is the Pag Parts bottom mount. I know its available in a V-Band turbine inlet but I think it might also be available in a T3 flange. It fits a 35R so I'm sure it'll fit the 5857 (compressor housings are both quite large). Talk to Jake at DW Garage about the Pag Parts manifold.

HTA35R on a B7 w/ the Pag Parts manifold:

[Dan[FN]6262]

I was thinking about exhaust manifold options for you, Dan.

Another manifold to consider is the Pag Parts bottom mount. I know its available in a V-Band turbine inlet but I think it might also be available in a T3 flange. It fits a 35R so I'm sure it'll fit the 5857 (compressor housings are both quite large). Talk to Jake at DW Garage about the Pag Parts manifold.

I had completely forgotten about Pag Parts! Thanks Doug!

[Dan[FN]6262]

Ring gap. I need suggestions. Pros and cons

[viceprp]

I want to see this beast when its done! Do you have the 2871 for sale? Or if sold how much did you sell it for and how many miles..

[texasboy21]

Is that a 2871 in that pics of the T3 treadstone?

[HTA A4]

Is that a 2871 in that pics of the T3 treadstone?

3076

[Dan[FN]6262]

I want to see this beast when its done! Do you have the 2871 for sale? Or if sold how much did you sell it for and how many miles..

Maybe we can get a few people to meet up in Chambersburg (roughly half way to Dillsburg for me) or something after I get it finished. The Eliminator is sold. YGPM

Is that a 2871 in that pics of the T3 treadstone?

The one on this page at the top is the Pag Parts mani and the one on the last page is the PSi Concepts mani.

[Dan[FN]6262]

Block is honed.

[texasboy21]

^^your making quick work of all of this! I wish I had a build..

[Dan[FN]6262]

^^your making quick work of all of this! I wish I had a build..

lol thanks. it would probably be almost back in the car if I hadn't had to wait 3.5 weeks for my buddy to return my headbolt tool haha.

get a beater and build it!

I'm beating around my old truck haha. everyone's like "wheres the Audi?" (not my close friends, they know whats up) and I tell them that I have the motor out and that I'm building it. they don't understand. Word is that I blew it up

[eg6siR]

I'm beating around my old truck haha. everyone's like "wheres the Audi?" (not my close friends, they know whats up) and I tell them that I have the motor out and that I'm building it. they don't understand. Word is that I blew it up

i know the feeling, i have been driving my 91 accord around lately, the a4 was just in the body shop for almost 2 months after it got hit by a drunk driver... so its just been hiding in my friends garage. all my car buddies from my area think i sold it or its still wrecked... but i am doing what you are doing and pulling my motor out, probably later today, building the bottom end.. and getting the car ready for some fun this summer...

only problem is, i have been working on my 1988 nissan 240, i swapped in an rb20det from an early skyline gt-r, and i cant stop putting my money into it for some reason...

where are you in PA dan? i am in Pittsburgh....

[eg6siR]

oh, and is that 450r in your info garage a quad? cause i have an 05 yamaha yfz450 SE, stage 3 dynojet fueling, dg exhaust... and i need some people to ride with... all my riding buddies moved away...

[Dan[FN]6262]

i know the feeling, i have been driving my 91 accord around lately, the a4 was just in the body shop for almost 2 months after it got hit by a drunk driver... so its just been hiding in my friends garage. all my car buddies from my area think i sold it or its still wrecked... but i am doing what you are doing and pulling my motor out, probably later today, building the bottom end.. and getting the car ready for some fun this summer...

only problem is, i have been working on my 1988 nissan 240, i swapped in an rb20det from an early skyline gt-r, and i cant stop putting my money into it for some reason...

where are you in PA dan? i am in Pittsburgh....

that sucks about your A4 getting hit. people can be ridiculous. a really good buddy of mine has a 89 240. he has hella plans for it, but can't seem to save enough to start on it. I'd love to see your 240, that thing should be beast.

I'm like 1.5-2 hrs from Pittsburgh via turnpike. I'm at the bottom of Bedford County, about 15-20 mins from the MD line.

oh, and is that 450r in your info garage a quad? cause i have an 05 yamaha yfz450 SE, stage 3 dynojet fueling, dg exhaust... and i need some people to ride with... all my riding buddies moved away...

hell yeah its a quad, we do live in Pa lol

I have it worked over pretty good. nothing absolutely nuts, just enough so that I enjoy it lol. I have the Honda HRC kit it, Hydrodynamic A-arms, G-Force Axle, quad tech seat cover, SS brake lines, Pro Tapers... just a bunch of stuff lol. Where do you ride?

[pOrKcHoP07]

This kid Dan...This build looks A-MAZING! Keep up the good work bud!

[Dan[FN]6262]

Thanks Nick. make sure you hit me up when you want to get that GT71R installed

[eg6siR]

i ride mostly south of pittsburgh, in washington, or greene county mostly...

here is the 240. i helped a friend build it last summer, then he wanted a 300zx so i bought it off of him cheap as hell, its still not finished... but i can drive it. just not inspected.. ;)







here is the yfz450:



and here is the a4 for good measure:

wrecked


fixed

[nein-reis]

Awesome build Dan, when is your ETA for finishing? Its going to be a beast!

I'm driving around a 1986 Ford Ranger and sometimes my wifes Toyo Camry, I get the "where is the Audi?" question a lot too. I usually say something to the affect of "she is getting a new motor" or "getting motor work" etc... I always get "what is wrong with the motor now?" I love the blank looks when I tell them nothing was wrong with the motor, especially my wifes friends... they really do not get it. lol

[Dan[FN]6262]

eg6sir- I wanna see that 240 in person! nice quad, and nice A4, I like your look. I only have one really shitty pic of my quad. forgive me, I'll take a better one for you. We should meet up and ride sometime.

before the seat cover, obviously lmao




nien-reis- Thanks, I'm really hoping that I can have it out on the road in less than 2 months. yeah, its slightly annoying when people don't get it, and still ask because you know that no matter what you tell them, they still won't get it lol. Hopefully you get your mess sorted out soon with the trans/clutch, I wanna see vids of that beast and I'm hoping you get it dyno'ed! I think it'll make some seriously numbers.

[Dan[FN]6262]

I'm gapping the 1st compression ring to .018 and the second to .20

[MMMB00ST_A4]

Your motor build sucks and your car is hideous...Just my $.02

[Dan[FN]6262]

Your motor build sucks and your car is hideous...Just my $.02

[MMMB00ST_A4]

^LMFAO!! I gotta save that shot for later use

[Dan[FN]6262]

lol!

you get your 30R yet?

[MMMB00ST_A4]

Slowly counting down the days til the swap =(

[Dan[FN]6262]

What all are you swapping?

[MMMB00ST_A4]

What all are you swapping?

Everything inside our engine bays..

[Dan[FN]6262]

Everything inside our engine bays..

so youre doing a 3.0 swap?

[Dan[FN]6262]

woohoooo got some tools today to finish the bottom end. and a valve spring compressor that I think will work on our tiny springs.

[SleeperAvant]

Nice.

[itsmatt33]

[QUOTE=eg6siR;5195098]i ride mostly south of pittsburgh, in washington, or greene county mostly...

here is the 240. i helped a friend build it last summer, then he wanted a 300zx so i bought it off of him cheap as hell, its still not finished... but i can drive it. just not inspected.. ;)







rb motor? what turbo u running?


u need a slivia front end asap!!!!

[audi silver]

nut..

[eg6siR]

@ itsmatt33. Yes it is an rb20det, stock turbo, and I like the stock 240 look, plus I really only plan to use the car for track days and the occasional rip around on
a back road.

However I was going to put an HKS turbo kit on it, with the f-conV ecu setup. I believe that it uses a turbo similar to a 2871r.. Though I'm not 100% on that.

@dan. Yea man, we def. Need to ride sometime, and I would love to show you the 240 in person, maybe you could come out for an auto-x day at beaverun raceway this summer and I'll let you drive it..

[Dan[FN]6262]

@dan. Yea man, we def. Need to ride sometime, and I would love to show you the 240 in person, maybe you could come out for an auto-x day at beaverun raceway this summer and I'll let you drive it..

.... really?! dude, I would seriously hug you. for your information, my hugs aren't cheap.

[a408]

<3 u dan..


cant wait for this.

[Dan[FN]6262]

<3 u dan..


cant wait for this.

<3 you too...


and I cant wait for you ........

[a408]

<3 you too...


and I cant wait for you ........

what??

[Dan[FN]6262]

I just lol'ed so hard that I sharted. seriously.

[a408]

HAHAHA